Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DECADE COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
Median Price
$12.406
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Arrow
1+ parts
-
100+ parts
1k+ parts
$11.630
10k+ parts
Digiode
Vyrian
Nova Conductors
Chip Stock
ABC Electronics Ltd.
TME
$13.150
EMSNET
ACDS - Activité Composants Distribution Service
LWI Electronics Inc
ComSIT Distribution GmbH
PC Components Company LLC
Bristol Electronics
Holdelec - ElecDif-Pro
ECAB
Semi Source
MISTER SPROCKETS
Sinequanon
Component Electronics Inc.
DF Sales Co.
Corel Iberica Componentes, S.L.
American Connector Supply Corp
Mil-Aero Solutions, Inc.
Manoshevitz Elec. Sales
AZTECH Wire
$6.200
$5.950
$5.840
$5.720
Ampacity Inc.
$10.550
Semicontronic
$10.286
$10.234
Parana Technologies
$13.403
$13.918
DigiPath Technology Company
$14.758
$13.577
ChromeModa Solutions
$15.059
$12.348
IDEA Electronic Components Group
$14.306
$13.553
Andel Nordic
$34.890
$24.420
SupplyDigital Components
TANS Electronics
A-Z Elektronik GmbH
Corphita
Continental Prestige Electronics
Problanco Electronics
Kulean Microsystems
Supply Digital
Argo Parts USA
Microchip USA
UHIMA Technologies
Perfect Parts
Corohmni
Bastille Electronics
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Assy Fe
ChipstoGo Electronic ltd
Digital Counters SN54LS90J attributes and parameters. Explore more Digital Counters devices from Fairchild Semiconductor
Additional Features:
Count Direction:
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Load Capacitance (CL):
Logic IC Type:
Maximum Frequency At Nominal Supply:
Maximum I (ol):
Operation Mode:
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Power Supplies (V):
Maximum Power Supply Current (ICC):
Propagation Delay At Nominal Supply:
Propagation Delay (tpd):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Type:
Width:
Minimum fmax:
SN54LS90J Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-087-2318, 5962010872318, 5962-01-077-5083, 5962010775083, 5962-15-004-2701, 5962150042701, 5962-99-118-8211, 5962991188211
NIIN
010872318, 010775083, 150042701, 991188211
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
MBR0540T1G
Onsemi
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
1N4148
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
1552200168
Molex
WIRE AND CABLE;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
Bytesonic Electronics
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
CD74HC393M
Rca Solid State
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
CD4026BPW
CD4026BPW by Texas Instruments is a 5-bit digital counter with a propagation delay of 250 ns and operates at a nominal voltage of 5V. It is designed for synchronous operation, has a max frequency of 2.5 MHz, and is suitable for military-grade applications requiring precise counting capabilities.
CD4060BM96G4
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SN74HC163IPWRG4Q1
SN74HC163IPWRG4Q1 by Texas Instruments is a 4-bit digital counter with a propagation delay of 46ns. Operating at a supply voltage of 5V, it has a max frequency of 25MHz and is ideal for industrial applications requiring synchronous operation. This CMOS technology-based device comes in a small outline package with dual terminals and is AEC-Q100 compliant.
CD74HC40103M
BINARY COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SN74HC393DT
SN74HC393DT by Texas Instruments is a digital counter with 4 bits and 2 functions. It has a propagation delay of 62 ns at 5V, making it suitable for industrial applications requiring up to 28 MHz frequency at a max supply voltage of 6V. The package style is small outline, surface mountable, with dual terminal position and Gull Wing form.
CD4024BMT
CD4024BMT by Texas Instruments is a 7-bit digital counter with a propagation delay of 160 ns. It operates at a nominal voltage of 5V and has a max frequency of 3.5 MHz. This CMOS technology device is ideal for military-grade applications requiring asynchronous operation and negative edge triggering.
CD4020BFX
Harris Semiconductor
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD4029BEX
Intersil
CD4029BEX by Intersil is a CMOS digital counter with load/preset input, 50 pF load capacitance, and bidirectional count direction. It operates synchronously at up to 2MHz frequency with power supplies of 5/15V. Ideal for industrial applications requiring a temperature range of -40 to 85°C, this 16-terminal device comes in an inline package shape made of plastic/epoxy material.
CD74HC390M96
DECADE COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
CD74HC40103E
CD74HC4040M
CD4024BCMX
CD4017BE
General Electric Solid State
DECADE COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD4522BE
CD4522BE by Texas Instruments is a 4-bit digital counter with 450 ns propagation delay and 5V nominal voltage. Ideal for military applications, it operates synchronously with a max frequency of 1.5 MHz at a temperature range of -55 to 125°C.
HEF4017BT
Philips Semiconductors
DECADE COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
CD74HC4040M96E4
CD74HC4040M96E4 by Texas Instruments is a 12-bit digital counter with 210 ns propagation delay, operating temperature range of -55 to 125 °C. It features negative edge trigger type, asynchronous operation mode, and can handle load capacitance of 50 pF. Ideal for applications requiring precise counting and timing functions in military-grade environments.
SN74S163N
SN74S163N by Texas Instruments is a 4-bit synchronous digital counter with a propagation delay of 25 ns and max frequency of 40 MHz. It operates on a supply voltage range of 4.75V to 5.25V, making it ideal for applications requiring precise counting and timing functions in commercial-grade electronics. The package style is in-line with through-hole terminal form, suitable for PCB assembly processes.
CD74HCT93E
CD74HCT93E by Texas Instruments is a digital counter with 3 bits, 2 functions, and a propagation delay of 73 ns. It operates at a nominal voltage of 5V and has a max frequency of 20 MHz. Ideal for military-grade applications requiring asynchronous operation and negative edge triggering in an inline package style.
MM74HC393M
Fairchild Semiconductor
BINARY COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SN54LS90J
Motorola
SN54LS90J by Texas Instruments is a TTL digital counter with 3 bits, 2 functions, and a propagation delay of 50 ns. It operates on a nominal voltage of 5V and has a max frequency of 16 MHz. Ideal for military-grade applications requiring asynchronous operation and negative edge triggering in an inline package style.
SN54LS90JD
SN54161J-00
SN54144W-00
DISPLAY DRIVER COUNTER; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 24; Package Code: DFP; Package Shape: RECTANGULAR;
SN54161W-00
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 16; Package Code: DFP; Package Shape: RECTANGULAR;
SN54161W-10
SN54143J-00
DISPLAY DRIVER COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
SN54143W-10
SN54160J
DECADE COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
SN54161J
SN54144W
SN54161W
SN54143W-00
SN54160J-00
SN54144J
SN54160W
DECADE COUNTER; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 16; Package Code: DFP; Package Shape: RECTANGULAR;
SN54LS93J
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved