Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BINARY COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
Median Price
$12.356
Lifecycle Status
Suppliers In-Stock
58
In-Stock Inventory
1k+
Rochester
1+ parts
$24.150
100+ parts
$22.700
1k+ parts
$21.250
10k+ parts
-
DigiKey
Verical
$0.562
$0.501
EXC GmbH
$0.229
Freelance Electronics
$0.391
Nova Conductors
$0.396
Digiode
$0.422
American Microsemiconductor Inc.
$0.490
Component Electronics Inc.
$0.960
$0.720
$0.630
Forefront Electronics and Design
$3.920
Chip Stock
DigiKey Marketplace
$0.460
Vyrian
Anansix
Lakeview Electronics
Microfarads
ComSIT Distribution GmbH
Pegasus Components GmbH
R&J Components
Atlantic Semiconductor
Extreme Components
Diverse Electronics
Resion
Prism Electronics
Inventory MP
ABC Electronics Ltd.
Electronic Expediters
ECAB
MISTER SPROCKETS
PC Components Company LLC
PAR Electronics
MRC Electronics
Fibra_Brandt Electronic GMBH
ACDS - Activité Composants Distribution Service
Kiltronic GmbH
Ashlea Components Ltd
Bristol Electronics
Dan-Mar Components
Speed Components Ltd
Q Components
Connector Distribution Corp
Right Parts Inc.
LWI Electronics Inc
Component Sense
$0.521
EMSNET
Inland Empire Components Inc.
Corel Iberica Componentes, S.L.
Sinequanon
First Choice Components Inc.
Sogenti Electronics
Pride Electronics
Martec Srl
Holdelec - ElecDif-Pro
A2Z Electronics, Inc.
GES GmbH
Mil-Aero Solutions, Inc.
NAC Semi
LittleDiode
Semicontronic
$0.377
$0.368
$0.366
Ampacity Inc.
Continental Prestige Electronics
$0.388
Argo Parts USA
$0.384
Corphita
$0.400
Aztec Data Supply Inc.
$16.399
Andel Nordic
$39.830
$27.881
Netroflash
$0.389
$0.369
Authorized Procurement Solutions
Supply Digital
Infinite Electronics LLP (Excess)
Assy Fe
Perfect Parts
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Digital Counters MM74HC4040N attributes and parameters. Explore more Digital Counters devices from Fairchild Semiconductor
Count Direction:
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Load Capacitance (CL):
Load or Preset Input:
Logic IC Type:
Maximum Frequency At Nominal Supply:
Maximum I (ol):
Operation Mode:
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Propagation Delay (tpd):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Trigger Type:
Width:
Minimum fmax:
MM74HC4040N Logic ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-348-1197, 5962013481197
NIIN
013481197
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
Ksl Microdevices
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
Tak Cheong Electronics Holdings
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
CD74HC393E
General Electric Solid State
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
CD74HC4060MT
CD74HC4060MT by Texas Instruments is a 14-bit digital counter with a propagation delay of 64 ns. It operates on a supply voltage range of 2-6V and has a max frequency of 20 MHz. Ideal for military-grade applications, it features negative edge triggering and Gull Wing terminal form.
74HC393BQ-Q100X
NXP Semiconductors
NXP Semiconductors' 74HC393BQ-Q100X is a CMOS digital counter with 4 bits, 2 functions, and operates at a max frequency of 24 MHz. It has load/preset inputs, negative edge trigger type, and AEC-Q100 screening level for automotive applications. The chip carrier package style measures 3mm x 2.5mm with a very thin profile suitable for surface mount assembly.
MC74AC4040DR2G
MC74AC4040DR2G by Onsemi is a 12-bit digital counter with 3.3V nominal voltage, 14ns propagation delay, and 100MHz max frequency. Ideal for industrial applications requiring asynchronous operation and negative edge trigger type in a small outline package.
MC74ACT161DG
BINARY COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SN74HC390DW
DECADE COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SN74HC4020N
SN74HC4020N by Texas Instruments is a 14-bit digital counter with a propagation delay of 32 ns. Operating at a supply voltage of 5V, it has a max frequency of 22 MHz and operates in asynchronous mode. This CMOS technology device is ideal for industrial applications requiring precise counting capabilities.
CD74HC393M
Harris Semiconductor
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
CD74HC4017M
RING COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Shape: RECTANGULAR; Family: HC/UH;
SN74LV4040ADGVR
SN74LV4040ADGVR by Texas Instruments is a 12-bit digital counter with a propagation delay of 12 ns and operates at a supply voltage of 3.3V. It features a 3-STATE output characteristic, suitable for industrial applications requiring asynchronous operation with a max frequency of 50 MHz. This surface-mount package has a small outline and thin profile, making it ideal for compact designs in temperature-sensitive environments.
CD4518BE
DECADE COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD74HC4040M96
Rca Solid State
SN74LV163ADR
SN74LV163ADR by Texas Instruments is a 4-bit digital counter with a propagation delay of 11.5 ns and operates at a max frequency of 50 MHz. It is ideal for industrial applications requiring synchronous operation, positive edge triggering, and a supply voltage range from 2V to 5.5V.
CD74HC4017EX
DECADE COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
74LV393D,112
NXP Semiconductors' 74LV393D,112 is a digital counter with 4-bit capacity and operates at a nominal voltage of 3.3V. Featuring a propagation delay of 35ns, it is suitable for automotive applications due to its temperature grade and asynchronous operation mode. With a max frequency of 20MHz, this CMOS technology-based device offers efficient counting capabilities in compact dimensions.
SN54LS90J
Fairchild Semiconductor
DECADE COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
SN74HC4060DBRE4
SN74HC4060DBRE4 by Texas Instruments is a 14-bit digital counter with a max frequency of 22MHz. It operates on a supply voltage range of 2-6V and has a propagation delay of 615ns. Ideal for industrial applications requiring asynchronous operation and negative edge triggering in compact designs.
MC14536BCPG
MC14536BCPG by Onsemi is a 4-bit digital counter with synchronous operation mode and positive edge trigger type. It has a propagation delay of 14000 ns, operates b/w -55 to 125 °C, and supports load/preset input. Ideal for military applications due to its CMOS technology and 16 terminals in a rectangular package style.
MC14060BCPG
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD4059AM96E4
CD4059AM96E4 by Texas Instruments is a CMOS digital counter with 24 terminals, operating at 5V supply voltage. It features a propagation delay of 360ns and can handle frequencies up to 1.5MHz. Ideal for military applications due to its wide temperature range (-55°C to 125°C) and bidirectional count direction capability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MM74HC4060N
National Semiconductor
MM74HC4060N by National Semiconductor is a 14-bit digital counter with a max frequency of 24MHz. It operates on a nominal voltage of 4.5V and has a propagation delay of 475ns. Ideal for industrial applications requiring asynchronous operation, it features negative edge triggering and can handle load capacitance up to 50pF.
MM74C926N
DISPLAY DRIVER COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
MM74HC4040M
MM74HC4040MX
MM74HC4040MX by National Semiconductor is a 12-bit digital counter with a propagation delay of 53ns. It operates on a nominal voltage of 5V and has a max operating temperature of 85°C. Ideal for industrial applications requiring asynchronous count direction, it features negative edge triggering and can handle load capacitance up to 50pF.
MM74HC393N
BINARY COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
MM74HC393M
BINARY COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
MM74HC4040MTC
BINARY COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
MM74HC4040MTCX
MM74HC4040MTCX by Fairchild Semiconductor is a 12-bit digital counter with a max frequency of 28MHz. It operates on a supply voltage range of 2-6V and has a propagation delay of 265ns. This CMOS technology device is ideal for industrial applications requiring asynchronous count direction control.
MM74HC4040N
MM74C927N
MM74HC4024N
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved