Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Dark Current: 50 nA; Nominal Current Transfer Ratio: 140 %; Additional Features: UL RECOGNIZED, VDE APPROVED;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Component Sense
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Prism Electronics
Andel Nordic
$6.805
$6.533
Native Components
$1,306.560
$1,280.429
$1,267.363
$1,254.298
Northwest PG Solutions
$1,437.216
TANS Electronics
Kulean Microsystems
Corphita
SupplyDigital Components
UHIMA Technologies
Problanco Electronics
Corohmni
Supply Digital
Optocoupler Transistor Outputs FOD2742AV attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Fairchild Semiconductor
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Isolation Voltage:
JESD-609 Code:
No. of Elements:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Terminal Finish:
FOD2742AV Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taitron Components
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
Panjit International
Shandong Yiguang Electronic Joint Stock
Fairchild Semiconductor
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
SFH6186-4T
Infineon Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; No. of Elements: 1; Additional Features: UL APPROVED; Maximum Dark Current: 200 nA;
4N35-G
Ct Micro International
4N35-G by Ct Micro International is a single optocoupler transistor output with a max forward current of 0.06 A. It has a max operating temperature of 110°C and a min operating temperature of -55°C. This component is commonly used in applications requiring high isolation voltage and low dark current.
FODM121V
Onsemi
FODM121V by Onsemi is a single optocoupler with a max forward current of 0.05A and collector-emitter breakdown voltage of 80V. It operates b/w -40 to 100°C, making it suitable for applications requiring high isolation voltage up to 3750V, such as in power supplies and industrial control systems.
FOD817C
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Power Dissipation: .15 W; Maximum Operating Temperature: 110 Cel;
PS2801-1-F3-A-N
Nec Electronics America
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .05 A; Maximum Isolation Voltage: 2500 V; Maximum Dark Current: 100 nA; Configuration: SINGLE; No. of Elements: 1;
CPC1303GRTR
IXYS Corporation
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .05 A; Maximum Operating Temperature: 85 Cel; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 30 V;
FOD817BS
FOD817BS by Onsemi is a single optocoupler transistor output with a max forward current of 0.05 A. It has a min operating temperature of -55°C and a max operating temperature of 110°C. This component is commonly used in applications requiring high isolation voltage and fast response time.
CNY17-3
Isocom
TRANSISTOR OUTPUT OPTOCOUPLER; Nominal Current Transfer Ratio: 100 %; No. of Elements: 1; Maximum Dark Current: 50 nA; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Forward Current: .06 A;
FOD2712AR2V
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Additional Features: UL RECOGNIZED, VDE APPROVED; No. of Elements: 1; Maximum Forward Current: .02 A;
PS2801-1-F3-A
Renesas Electronics
PS2801-1-F3-A by Renesas Electronics is a SINGLE optocoupler with max. forward current of 0.05A, min. collector-emitter breakdown voltage of 80V, and max. isolation voltage of 2500V. It is used in applications requiring high-voltage isolation such as industrial automation and power supplies due to its robust design and wide operating temperature range (-55°C to 100°C).
FODM124R2V
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 80 V; Nominal Current Transfer Ratio: 100 %;
CNY17-3X007T
Vishay Intertechnology's CNY17-3X007T is a single optocoupler with max forward current of 0.06A, ideal for applications requiring transistor output optocouplers. With a min operating temp of -55°C and max temp of 100°C, it offers high isolation voltage of 5300V, making it suitable for surface mount configurations. Its nominal current transfer ratio is 70%, ensuring efficient performance in various electronic circuits.
MOC223R2VM
MOC223R2VM by Onsemi is a single configuration optocoupler with a max forward current of 0.06A. It has a min operating temperature of -40°C and a max operating temperature of 100°C. This optocoupler is commonly used in applications requiring high isolation voltage and surface mounting feature.
TLP281-4(GB-TP,F)
Toshiba
Toshiba's TLP281-4(GB-TP,F) is a 4-channel optocoupler with max. forward current of 0.05A and max. isolation voltage of 2500V. It operates b/w -55°C to 100°C, making it suitable for applications requiring high voltage protection and signal isolation in harsh environments.
HCPL-181-00BE
Agilent Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Configuration: SINGLE; JESD-609 Code: e3; Maximum Forward Current: .05 A;
TLP281-4(GB-TP,J,F
Toshiba's TLP281-4(GB-TP,J,F) is a 4-channel optocoupler with a max forward current of 0.05A and an isolation voltage of 2500V. It operates in temperatures ranging from -55 to 100 °C and has a min collector-emitter breakdown voltage of 80V. This optocoupler is commonly used for applications requiring electrical isolation b/w high-voltage systems and low-voltage control circuits.
TLP291(BL-TP,SE(T
Toshiba's TLP291(BL-TP,SE(T optocoupler features a max forward current of 0.05A and collector-emitter breakdown voltage of 80V. With a nominal current transfer ratio of 200%, it is ideal for applications requiring high isolation voltage up to 3750V in temperature ranges from -55°C to 110°C.
PC817X4NSZ1B
Sharp Corporation
Sharp Corporation's PC817X4NSZ1B is a SINGLE optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 5000V. Featuring a min. operating temp of -30°C and max. temp of 100°C, it offers a collector-emitter breakdown voltage of 80V and nominal current transfer ratio of 600%.
TLP293-4(GB,E(T
Toshiba's TLP293-4(GB,E(T) is a 4-channel optocoupler with max. forward current of 0.05A and max. power dissipation of 0.1W. Ideal for applications requiring high isolation voltage (3750V), such as industrial control systems and power supplies due to its transistor output configuration and high collector-emitter breakdown voltage of 80V.
HMHA2801AR2
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); Configuration: SINGLE; Maximum Isolation Voltage: 3750 V; No. of Elements: 1; JESD-609 Code: e3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved