Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POWER FACTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: LQFP; Package Shape: SQUARE; Surface Mount: YES;
Median Price
$4.859
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$5.505
100+ parts
$3.482
1k+ parts
$3.299
10k+ parts
-
DigiKey
$6.420
$4.157
$3.748
$3.646
Mouser Electronics
$4.160
$3.750
Rochester
$3.370
$3.020
$2.840
Verical
$4.213
$3.775
$3.550
Flip Electronics (Authorized)
Chip1Stop
$3.334
Digiode
$3.572
Nova Conductors
$3.930
Vyrian
Flip Electronics
Chip Stock
Cyclops Electronics Ltd
Semicontronic
$2.750
$2.681
$2.668
Ampacity Inc.
Corohmni
$3.240
Corphita
$3.384
Continental Prestige Electronics
$3.851
Argo Parts USA
Aztec Data Supply Inc.
$13.633
Microchip USA
$19.096
Kepictronics
Lixinc
Authorized Procurement Solutions
Problanco Electronics
SupplyDigital Components
Kulean Microsystems
Futuretech Components
Supply Digital
Perfect Parts
GreenTree Electronics
TANS Electronics
UHIMA Technologies
Switching Regulators & Controllers FAN9673Q attributes and parameters. Explore more Switching Regulators & Controllers devices from Fairchild Semiconductor
Other IC type:
Control Mode:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Switcher Config:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
FAN9673Q Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Temic Semiconductors
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358DR2G
Onsemi
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
Continental Device India
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
Microsemi
EU2B-YS303C
Idec
ROTARY SWITCH;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
TPS60400DBVR
TPS60400DBVR by Texas Instruments is a small outline, low profile switched capacitor converter with a max output current of 0.06A and a max switching frequency of 350kHz. It operates in industrial temperature grade range and is suitable for applications requiring a nominal input voltage of 5V and a min output voltage of -5V.
LM2594HVMX-ADJ/NOPB
LM2594HVMX-ADJ/NOPB by Texas Instruments is a switching regulator with a voltage-mode control technique, operating b/w -40 to 125°C. It offers a max output current of 0.5A and supports input voltages from 4.5V to 60V, making it ideal for automotive applications requiring efficient power management in compact spaces.
EN6347QI
Intel
EN6347QI by Intel is a VOLTAGE-MODE SWITCHING REGULATOR with 4A output current, ideal for BUCK applications. Operating b/w -40 to 85 °C, it supports input voltage from 2.5V to 6.6V and offers a max switching frequency of 3000 kHz. With a compact design (7mm x 4mm), it's suitable for industrial use in various electronic devices.
LM5007MM/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
TPS63000DRCTG4
TPS63000DRCTG4 by Texas Instruments is a switching regulator with a max output current of 2A and max operating temp of 85°C. Ideal for industrial applications, it operates in buck-boost mode with a control technique of PWM, offering a wide input voltage range from 1.8V to 5.5V.
LM2594M-5.0
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS54061DRBR
TPS54061DRBR by Texas Instruments is a switching regulator with a max output voltage of 58V and a max output current of 0.2A. It operates in buck configuration, has a control mode of current-mode, and uses pulse width modulation for control technique. This IC is suitable for automotive applications due to its temperature grade and can handle input voltages ranging from 4.7V to 60V.
CHL8316CRT
Infineon Technologies
Switching Regulator or Controllers;
LM60430AQRPKRQ1
Texas Instruments' LM60430AQRPKRQ1 is a switching regulator with 3A output current, 460kHz max switching frequency, and -40 to 150°C operating temp. Ideal for automotive applications due to AEC-Q100 screening level, it offers a compact chip carrier package style with 13 terminals for efficient power management in tight spaces.
ST1S06PUR
STMicroelectronics
ST1S06PUR by STMicroelectronics is a 6-terminal switching regulator with a max output current of 1.5A and a control mode of current-mode PWM. It operates as a buck switcher with a max switching frequency of 1800kHz, suitable for applications requiring efficient voltage regulation in compact spaces.
LMR62014XMFX/NOPB
LMR62014XMFX/NOPB by Texas Instruments is a 5-terminal switching regulator with a control mode of current-mode PWM. It operates b/w -40 to 125°C, suitable for automotive applications. With a boost switcher config and max output voltage of 20V, it's ideal for low-profile designs requiring high efficiency at up to 1600kHz frequency.
LM5007SDX/NOPB
LM5007SDX/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating at -40 to 125°C. It has a max output voltage of 73V and can handle up to 0.5A output current. Ideal for automotive applications due to its small size, high efficiency (800 kHz), and wide input voltage range of 9-75V.
LMZM23600V3SILT
LMZM23600V3SILT by Texas Instruments is a switching regulator with a current-mode control technique, suitable for automotive applications. It offers a max output current of 0.5A, operating temperature range from -40 to 125°C, and supports buck-boost switcher configuration. With a nominal input voltage of 24V and nominal output voltage of 3.3V, it is ideal for compact microelectronic assemblies requiring efficient power management.
LM2672MX-5.0/NOPB
ST1S10PHR
ST1S10PHR by STMicroelectronics is a switching regulator with max output current of 3A and max switching frequency of 1100kHz. It operates in buck configuration, supports pulse width modulation control technique, and has a small outline package style. Ideal for applications requiring efficient voltage regulation in compact spaces.
LMR62014XMFE/NOPB
LMR62014XMFE/NOPB by Texas Instruments is a switching regulator with 5 terminals, operating b/w -40 to 125 °C. It has a min output voltage of 3 V and max of 20 V, suitable for automotive applications due to its compact size and pulse width modulation control technique.
LM25011MY/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE; Surface Mount: YES;
LM25085MYE/NOPB
LM25085MYE/NOPB by Texas Instruments is a switching regulator with 10A output current, 1.25V min output voltage, and 42V max output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact square package design. This voltage-mode controller operates at a max frequency of 1000kHz for efficient power management in various systems.
LMZ10501SEX/NOPB
LMZ10501SEX/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a max switching frequency of 2250 kHz. This small outline package with 8 terminals is ideal for applications requiring high efficiency power conversion in compact spaces.
TPS55340PWP
TPS55340PWP by Texas Instruments is a switching regulator with 14 terminals, operating at -40 to 150°C. It offers a current-mode control technique, PWM mode, and buck-boost configuration. Ideal for automotive applications due to its wide input voltage range of 2.9V to 32V and high output current capability of 7.75A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FAN9672Q
FAN9672Q by Onsemi is a 32-terminal power factor controller with a nominal voltage of 15V. It features a flatpack package style, Gull Wing terminal form, and operates at a max supply current of 7mA. This switching regulator is ideal for applications requiring precise power management in electronic devices.
Fairchild Semiconductor
POWER FACTOR CONTROLLER; No. of Terminals: 32; Package Code: QFP; Package Shape: SQUARE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30;
FAN9611MX
POWER FACTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FAN9611MX by Onsemi is a VOLTAGE-MODE controller with 12V input and 5V output, suitable for automotive applications. It operates at a max frequency of 630 kHz with a supply current of 6mA. The small outline package has dual terminals and GULL WING form, making it ideal for compact designs.
FAN9673Q
FAN9673QX
FAN9612MX
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved