Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Median Price
$0.520
Lifecycle Status
Suppliers In-Stock
58
In-Stock Inventory
1k+
Freelance Electronics
1+ parts
$0.317
100+ parts
-
1k+ parts
10k+ parts
Nova Conductors
$0.351
TEDSS.com
Component Electronics Inc.
$1.540
$1.150
$1.000
Forefront Electronics and Design
$2.450
American Microsemiconductor Inc.
$4.500
Chip Stock
Anansix
MISTER SPROCKETS
Bristol Electronics
ComSIT Distribution GmbH
NexGen Digital
Prism Electronics
Digiode
Odi Ramu Company
Goldney Electronics S.L.
Vyrian
Atlantic Semiconductor
Electronic Expediters
PAR Electronics
Speed Components Ltd
Standard Data Resources
Component Sense
Holdelec - ElecDif-Pro
Mil-Aero Solutions, Inc.
Sunrise Surplus Inc.
Halfin
Extreme Components
Electronics Depot
Connector Distribution Corp
Right Parts Inc.
Sensible Micro Corp
$0.458
$0.423
Ashlea Components Ltd
ACDS - Activité Composants Distribution Service
LWI Electronics Inc
Zilex Electronics Inc.
Fibra_Brandt Electronic GMBH
ECAB
First Choice Components Inc.
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Semtec, LLC
MRC Electronics
J & M Industries LLC
Q Components
QIE Inc.
Corel Iberica Componentes, S.L.
Sea View Technologies
Manoshevitz Elec. Sales
Resion
M&R Communications
Tectiva GmbH
PC Components Company LLC
Classic Components Corporation
Sinequanon
A2Z Electronics, Inc.
North Shore Components
NAC Semi
Legend Electronics Inc.
Continental Prestige Electronics
$0.344
Argo Parts USA
$0.340
Netroflash
Semicontronic
$3.500
$3.412
$3.395
AZTECH Wire
$8.607
Aztec Data Supply Inc.
$22.854
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
A-Z Elektronik GmbH
Alle Elektronik GmbH
Perfect Parts
Supply Digital
Cyclops Electronics Ltd (Excess)
Assy Fe
Kepictronics
Corphita
Futuretech Components
Microchip USA
Infinite Electronics LLP (Excess)
Computer Components Inc. - USA
Component Stockers USA
GreenTree Electronics
Resion (Excess)
Multiplexers & Switches CD4051BCN attributes and parameters. Explore more Multiplexers & Switches devices from Fairchild Semiconductor
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Negative Supply Voltage (Vsup):
Minimum Negative Supply Voltage (Vsup):
Nominal Negative Supply Voltage (Vsup):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
CD4051BCN Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-086-6693, 5962010866693
NIIN
010866693
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
Continental Device India
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
SN74LV4052ADR
Texas Instruments
SN74LV4052ADR by Texas Instruments is a CMOS differential multiplexer with 2 channels. It operates at a supply voltage range of 2-5.5V and offers a max on-state resistance of 225 ohm. With a nominal bandwidth of 50 kHz, it is ideal for industrial applications requiring high-speed signal switching in compact designs.
DG212CJ
General Electric Solid State
SPST; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
74HC4067D,652
Nexperia
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG509FBRNZ
Analog Devices
ADG509FBRNZ by Analog Devices is a CMOS differential multiplexer with 4 channels. It features a max on-state resistance of 390 ohm and nominal off-state isolation of 93 dB. Ideal for industrial applications requiring precise signal switching within the temperature range of -40 to 85 °C.
MAX313FEPE
MAX313FEPE by Maxim Integrated is a 4-function multiplexer with 16 terminals, operating at -40 to 85°C. It features a max on-state resistance of 10 ohm and switching voltage of 12/+-15 V. Ideal for industrial applications requiring high isolation and fast switch-on/off times in a compact IN-LINE package.
CD74HC4052PWRE4
CD74HC4052PWRE4 by Texas Instruments is a CMOS differential multiplexer with 4 channels. It operates at temperatures from -55 to 125 °C and has a max on-state resistance of 130 ohm. With a package style of small outline, thin profile, and shrink pitch, it is suitable for military-grade applications requiring precise signal switching.
MPC506AU/1K
The Texas Instruments MPC506AU/1K is a CMOS single-ended multiplexer with 28 terminals in a small outline package. It operates at industrial temperature grades, with a max supply current of 1.5mA and nominal voltage of +-15V. Ideal for applications requiring common output, it offers fast switching times and high off-state isolation.
TS3USB221ARSER
TS3USB221ARSER by Texas Instruments is a 10-terminal chip carrier with a very thin profile. It operates b/w -40 to 85°C, with a supply voltage range of 2.3V to 3.6V and max on-state resistance of 6 ohm. Ideal for industrial applications requiring a differential multiplexer with separate outputs and break-before-make switching capability.
ADG819BRTZ-500RL7
ADG819BRTZ-500RL7 by Analog Devices is a SPDT switch with 6 terminals, operating at temperatures from -40 to 125°C. It has a max on-state resistance of 1.4 ohm and switching time of 70 ns, suitable for automotive applications requiring low-profile components with high isolation levels.
DG403DYZ-T
Renesas Electronics
Renesas Electronics DG403DYZ-T is a SPDT switch with 2 functions, operating at -40 to 85°C. It has a max on-state resistance of 45 ohm and fast switching times of 150 ns on and 100 ns off. This industrial-grade CMOS switch is ideal for applications requiring high-speed signal routing in compact spaces.
74HC4051D,653
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG1208YRUZ
ADG1208YRUZ by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It operates at a max supply voltage of +/-16.5V and has a max on-state resistance of 200 ohm. With automotive temperature grade, it is ideal for applications requiring high-speed switching and low power consumption.
DG442DY+
Analog Devices' DG442DY+ is a CMOS SPST switch with 4 functions, 16 terminals, and -20V to +20V supply voltage range. With 85 ohm max on-state resistance and 60dB off-state isolation, it's ideal for industrial applications requiring fast switching times of 250ns on and 120ns off.
NC7SB3157P6X
Fairchild Semiconductor
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD4051BM96
CD4051BM96 by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals. It operates at temperatures from -55 to 125 °C and has a max supply current of 3 mA. Ideal for applications requiring separate output, it offers a nominal bandwidth of 20 kHz and on-state resistance of 1050 ohm.
SN74LV4051ADR
SN74LV4051ADR by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals and a supply voltage range of 2V to 5.5V. It features a max on-state resistance of 225 ohm, peak reflow temperature of 260°C, and industrial temperature grade. Ideal for applications requiring high-speed switching in compact electronic devices.
ADG426BRSZ-REEL
ADG426BRSZ-REEL by Analog Devices is a 16-channel single-ended multiplexer with a max on-state resistance of 80 ohm. It operates at industrial temperature grade (-40 to 85 °C) and has a small outline package style. Ideal for applications requiring high channel count and low on-state resistance in harsh environments.
DG508ACJ
Intersil
SINGLE-ENDED MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ADG1606BCPZ-REEL7
ADG1606BCPZ-REEL7 by Analog Devices is a 32-terminal CMOS multiplexer with 16 channels. It operates at -40 to 125 °C, with a max on-state resistance of 7.5 ohm and common output. Ideal for automotive applications due to its low supply current and high isolation level.
SIP32419DN-T1-GE4
Vishay Intertechnology
Vishay Intertechnology's SIP32419DN-T1-GE4 is a SPST switch with 10 terminals, operating voltage range of 6-28V. It has a low on-state resistance of 0.072 ohm and adjustable threshold voltage of +4.8V. Ideal for industrial applications requiring small outline, heat sink package design in temperature range -40 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Harris Semiconductor
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum On-state Resistance (Ron): 1050 ohm;
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD4051BE
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Thomson Consumer Electronics
SINGLE-ENDED MULTIPLEXER; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-PDIP-T16;
CD4053BE
CD4051BM96G3
CD4051BM96G3 by Texas Instruments is a 16-terminal CMOS multiplexer with a supply voltage range of 3-20V. It has a max on-state resistance of 1050 ohm and a nominal bandwidth of 20 kHz. This multiplexer is commonly used in military-grade applications requiring small outline packages and high temperature tolerance.
CD4051BM
National Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved