Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
J-K FLIP-FLOP; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$0.216
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$17.689
100+ parts
$16.097
1k+ parts
$14.505
10k+ parts
-
Rochester
$0.225
$0.186
$0.166
DigiKey
$0.190
Verical
$0.208
Digiode
$0.175
Vyrian
$0.184
Component Electronics Inc.
$0.960
$0.720
$0.630
ComSIT Distribution GmbH
Elcom Components
Bristol Electronics
Ack Elektronik San.Tic.Ltd.Sti
ECAB
PC Components Company LLC
Martec Srl
Corel Iberica Componentes, S.L.
Zilex Electronics Inc.
Standard Data Resources
LIBRA Elektronik GmbH
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Resion
J2 Sourcing AB
Greenchips
SIE Connect GmbH - GreenChips
R&J Components
Semi Source
Anansix
Corohmni
$0.164
Corphita
Advanced Electronics
Speed Components Ltd (Excess)
Authorized Procurement Solutions
Supply Digital
Perfect Parts
GreenTree Electronics
Legend Electronics Inc. (Excess)
Assy Fe
Glotronic Ltd.
Microchip USA
Latches & Flip-Flops 74F112SCX attributes and parameters. Explore more Latches & Flip-Flops devices from Fairchild Semiconductor
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Logic IC Type:
Maximum Frequency At Nominal Supply:
Maximum I (ol):
Moisture Sensitivity Level (MSL):
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Power Supplies (V):
Maximum Power Supply Current (ICC):
Propagation Delay (tpd):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Trigger Type:
Width:
Minimum fmax:
74F112SCX Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-521-8204, 5962015218204
NIIN
015218204
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
General Semiconductor
BSS138-7-F
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
74VHC175M
Fairchild Semiconductor
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
CD74HCT174M
Harris Semiconductor
D FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MC74HC112ADR2G
MC74HC112ADR2G by Onsemi is a dual flip-flop with 2 functions, operating at 5V. It has a load capacitance of 50pF and can handle up to 4A current. Ideal for military-grade applications requiring high-frequency operation up to 20MHz in small outline packages.
SN74HC175PWRG4
SN74HC175PWRG4 by Texas Instruments is a 4-bit latch/flip-flop with positive edge trigger. It operates at a nominal voltage of 5V and has a max frequency of 25MHz. This IC is commonly used in industrial applications requiring reliable data storage and retrieval.
SN74F74N
SN74F74N by Texas Instruments is a TTL technology latch with 2 functions, 9.2 ns propagation delay, and 50 pF load capacitance. It operates at a supply voltage of 5V and has a max frequency of 100 MHz. Ideal for applications requiring positive edge triggering in commercial temperature environments.
74LCX74BQX
74LCX74BQX by Onsemi is a CMOS latch with 2 functions, 7 ns propagation delay, and operates at a supply voltage of 2.5V. It is used in applications requiring fast response times and low power consumption, such as industrial control systems and communication devices.
SN74LVC74APWR
SN74LVC74APWR by Texas Instruments is a dual-function latch with 5.2ns propagation delay, ideal for automotive applications. Operating at 1.8V to 3.6V, it features a max frequency of 150MHz and low power supply current of 0.01mA, making it suitable for high-speed digital systems in compact designs. With a small outline package style and surface mount capability, this CMOS technology flip-flop offers complementary output polarity and positive edge triggering for efficient signal processing.
MC74HC273ADWR2G
MC74HC273ADWR2G by Onsemi is an 8-bit latch with a supply voltage of 3V, operating b/w -55 to 125°C. It has a propagation delay of 220ns and can handle load capacitance up to 50pF. Ideal for military-grade applications due to its small outline package and positive edge trigger type.
CD74AC175M96E4
CD74AC175M96E4 by Texas Instruments is a 4-bit latch with a propagation delay of 17.1 ns, suitable for military-grade applications. It operates at a nominal voltage of 3.3V/5V and has a max frequency of 71MHz, making it ideal for high-speed digital circuits in harsh environments. This surface-mount device features complementary output polarity and Gull Wing terminal form for efficient PCB integration.
SN74LVC1G79DBVR
SN74LVC1G79DBVR by Texas Instruments is a latches & flip-flops IC with 5ns propagation delay, 32A max I (ol), and 160MHz max frequency. Ideal for automotive applications, it operates b/w -40 to 125°C, supports a supply voltage range of 1.65V to 5.5V, and features a small outline package style.
CD74AC112M96G4
CD74AC112M96G4 by Texas Instruments is a dual-function latches & flip-flops IC with 2 bits, operating at a nominal voltage of 3.3V and max frequency of 71MHz. It features negative edge trigger type, propagation delay of 129ns, and complementary output polarity. Ideal for military-grade applications requiring high-speed data processing in compact electronic systems.
SN7476N3
J-K FLIP-FLOP; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
SN74AHC74PWRE4
SN74AHC74PWRE4 by Texas Instruments is a dual-function latches & flip-flops IC with 10.5 ns propagation delay at 3.3V, suitable for industrial applications. It features complementary output polarity, operates b/w -40 to 85°C, and has a max frequency of 75 MHz at nominal voltage. This surface-mount device comes in a small outline package with 14 terminals and Gull Wing terminal form.
SN74HC259DR
SN74HC259DR by Texas Instruments is an 8-bit latches & flip-flops IC with a propagation delay of 28ns at 5V. It operates in industrial temperature range (-40 to 85°C) and has a max supply voltage of 6V. Ideal for applications requiring low-level trigger type and true output polarity, this CMOS technology-based IC comes in a small outline package with surface mount feature.
5962-9321701QRA
The Texas Instruments 5962-9321701QRA is an 8-bit latch with a propagation delay of 7.5 ns at 5V, suitable for military applications. It operates b/w -55 to 125°C and has a max frequency of 150 MHz, making it ideal for high-speed signal processing in harsh environments. With MIL-PRF-38535 Class Q screening, this BICMOS technology flip-flop offers reliable performance in critical systems.
CD74HCT273M96
CD74HCT273M96 by Texas Instruments is an 8-bit latch with a propagation delay of 45 ns at 5V. It operates in a temperature range from -55°C to 125°C, making it suitable for military-grade applications. With a max frequency of 16 MHz, this CMOS technology-based device is ideal for high-speed data storage and transfer systems.
SN74LVC2G74DCURE4
SN74LVC2G74DCURE4 by Texas Instruments is a latches & flip-flops IC with 5.9ns propagation delay, 1.8V nominal voltage, and 32A max I (ol). It is used in automotive applications due to its positive edge trigger type and 175MHz max frequency at nominal supply.
CD74HC73M96E4
CD74HC73M96E4 by Texas Instruments is a dual-function latches & flip-flops IC with 2 bits, operating at a nominal voltage of 4.5V. It features a propagation delay of 240ns, max frequency of 20MHz, and can withstand temperatures from -55 to 125°C. Ideal for military-grade applications requiring fast data processing in compact designs.
SN74AUP1G74DCUR
SN74AUP1G74DCUR by Texas Instruments is a latches & flip-flops IC with 27ns propagation delay, 30pF load capacitance, and 1.2V nominal voltage. It is ideal for industrial applications requiring positive edge triggering, complementary output polarity, and a max frequency of 40MHz at a supply voltage range of 0.8V to 3.6V.
MC10EP52MNR4G
MC10EP52MNR4G by Onsemi is a Square-shaped Latch with 0.38 ns Propagation Delay, suitable for Industrial use. It operates at 3.3V with -5.2V Power Supplies and has a Max Frequency of 4GHz. This ECL Technology device features Positive Edge Trigger and is Surface Mountable, making it ideal for high-speed applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved