Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
XEV10-50-1P fuse by Eaton Corp. is a 10x38mm electric fuse with 2740J nominal joule integral and 50A rated current. Ideal for circuit protection in applications requiring a max operating temperature of 125°C, it has a rated breaking capacity of 20kA and can handle up to 500V DC.
Median Price
$39.520
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
AZTECH Wire
$16.089
Continental Prestige Electronics
$38.730
Authorized Procurement Solutions
Netroflash
$37.544
$36.754
Argo Parts USA
2740 J - High joule rating ensures excellent protection against power surges, making it a reliable choice for sensitive equipment.
10.3 mm - Compact size allows for easy installation in tight spaces without sacrificing performance.
10x38mm - Standard size makes it compatible with a wide range of applications, providing versatility and convenience.
TAB/BLADE - TAB/BLADE terminals offer a secure connection and easy installation, enhancing the safety and reliability of the fuse.
38.1 mm - Adequate height provides ample space for heat dissipation, preventing overheating and ensuring long-lasting performance.
50 A - High rated current capacity allows the fuse to handle heavy loads, making it suitable for various industrial and commercial settings.
125 °C - Wide temperature range ensures reliable operation in extreme conditions, offering peace of mind in critical applications.
40 °C - Low minimum operating temperature allows the fuse to function effectively in cold environments, increasing its usability in diverse settings.
ELECTRIC FUSE - Electric fuse design provides superior protection against short circuits and overloads, safeguarding equipment from damage.
20000 A - High breaking capacity ensures the fuse can handle surges and faults effectively, enhancing overall system reliability.
500 V - High DC voltage rating makes the fuse suitable for DC circuits, offering compatibility with a wide range of electronic devices.
INLINE/HOLDER - Inline/holder mounting feature allows for easy installation and replacement, saving time and effort in maintenance tasks.
Fuses XEV10-50-1P attributes and parameters. Explore more Fuses devices from Eaton Corporation
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated DC Voltage:
Body Diameter:
Body Height:
Fuse Size/Group:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Shape:
Mounting Feature:
Today, the world runs on critical infrastructure and technology. Planes. Hospitals. Factories. Data centers. Vehicles. The electrical grid. These are things people depend on every day. And the companies behind them depend on us to help solve some of the toughest power management challenges on the planet. At Eaton, we’re dedicated to improving people’s lives and the environment with power management technologies that are more reliable, efficient, safe and sustainable.We are a power management company doing business in more than 175 countries. Our energy-efficient products and services help our customers effectively manage electrical, hydraulic and mechanical power more reliably, efficiently, safely and sustainably. By giving people tools to use power more efficiently. Helping companies do business more sustainably. And by encouraging each and every employee at Eaton to think differently about our business, our communities—and the positive impact we can have on the world.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
Sangdest Microelectronics (Nanjing)
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Temic Semiconductors
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
CRCW080510R0FKEA
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
Micro Commercial Components
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
7010.9810.63
Schurter Ag
The Schurter Ag 7010.9810.63 fuse is a 7x2mm electric fuse with a rated current of 1A and very fast blow characteristic. It has a max operating temperature of 125°C, suitable for circuit protection in various electronic devices. Compliant with CUL and UL standards, it offers a rated breaking capacity of 300A for reliable performance.
ATM-5LP
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE; Maximum Operating Temperature: 125 Cel;
0297004.WXNV
Littelfuse
Littelfuse 0297004.WXNV is a MINI fuse with 4A rated current, 31J nominal joule integral, and 0.03s trip time. It is used for circuit protection in applications requiring a 32V rated voltage, such as automotive electronics and power distribution systems.
LPJ-60SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 60 A; Terminal Shape: END CAP;
ANN-80
Eaton Corporation
Eaton Corporation's ANN-80 fuse, rated at 80A and 125V AC/80V DC, features very fast blow characteristic with a breaking capacity of 2500A. With TAB/BLADE terminals and dimensions of 81mm x 22.2mm, it is ideal for electric circuit protection in various applications requiring surface mount installation and built-in indicator feature.
0685T1000-01
Bel Fuse
Bel Fuse 0685T1000-01 is a 1206 size fuse with 1A rated current and 63V DC/AC voltage. It has slow blow characteristic, 0.12J nominal joule integral, and 0.002s trip time. Ideal for circuit protection in automotive electronics due to AEC-Q200 compliance and TUV/UL standards.
0313003.MXP
Littelfuse 0313003.MXP fuse, rated at 3A and 250V, offers a trip time of 5s with a blow characteristic of TIME LAG. With dimensions of 6.35mm x 31.75mm, it is used for circuit protection in applications requiring a supplemental electric fuse with a pre-arcing rating of 200 A2/s.
442
Uchihashi Estec
THERMAL FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 50 V; Rated Current: 3.5 A; Terminal Shape: WIRE;
ATDR1-1/2
Mersen S A
ATDR1-1/2 by Mersen S A is a 1.5A time delay fuse with 600V AC and 300V DC ratings. It has a compact body size of 10.4mm x 38.1mm, suitable for inline mounting applications. With a high breaking capacity of 200kA, it provides reliable circuit protection in various electrical systems certified by CSA and UL standards.
FNQ-12
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 12 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
ATDR20
ATDR20 by Mersen S A is a 20A time delay electric fuse with 600V AC and 300V DC ratings. Featuring a body size of 10.4mm x 38.1mm, it has an END CAP terminal shape and inline/holder mounting for circuit protection in various applications meeting CSA and UL standards.
LP-CC-2-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.25 A; Terminal Shape: END CAP;
TCF60
Eaton Corporation's TCF60 fuse is a 60A electric fuse with time delay blow characteristic. It has a rated AC voltage of 600V and rated DC voltage of 300V, suitable for inline mounting applications. With dimensions of 54.1mm x 25.4mm x 28.58mm, it offers circuit protection with a high breaking capacity of 300000A, meeting CSA and UL standards.
0498100.M
Littelfuse 0498100.M fuse has a rated current of 100A, blow characteristic of time delay, and rated breaking capacity of 2000A. It is used for electric circuit protection with dimensions of 16mm x 12mm x 8mm. Ideal for applications requiring a max operating temperature of 125°C and min operating temperature of -40°C.
FRN-R-6-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 6.25 A; Terminal Shape: END CAP;
3413.0115.22
Schurter Ag's 3413.0115.22 fuse, rated at 1A and 32V, features a very fast blow characteristic with dimensions of 3.2mm x 1.6mm x 0.6mm. Ideal for circuit protection in electronics, it has a pre-arcing rating of 0.07 A2/s and is UL/CUL certified for use in various applications requiring surface mount fuses.
KTK-R-1/2
The Eaton Corporation KTK-R-1/2 fuse, rated at 0.5A and 600V, features fast blow characteristic with a body length of 10.3mm and diameter of 38.1mm. Designed for circuit protection in applications requiring high breaking capacity up to 200kA, it is suitable for use in CE, CSA, and UL compliant systems with inline mounting capability.
0473003.MRT1L
Littelfuse 0473003.MRT1L PICO fuse with 3A current, 125V AC/DC voltage rating, and 21J joule integral. Ideal for circuit protection in applications requiring time delay blow characteristic and rated breaking capacity of 50A. Dimensions of 3.43mm x 7.11mm make it suitable for through-hole mounting in various electronic devices.
BD40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 550 V; Rated DC Voltage: 250 V; Rated Current: 40 A; Terminal Shape: TAB/BLADE;
0697-0100-01
Bel Fuse 0697-0100-01 is a MICRO fuse with 0.1A rated current and 250V AC voltage. With dimensions of 8.35mm x 4mm x 7.7mm, it offers time lag blow characteristic for circuit protection. Ideal for applications requiring electric fuse with through hole mounting feature and matte tin terminal finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
XEV10-40-1P
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 500 V; Rated Current: 40 A; Terminal Shape: TAB/BLADE; Maximum Operating Temperature: 125 Cel;
XEV10-30-1P
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 500 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Minimum Operating Temperature: -40 Cel;
XEV10-30-B
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 500 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 10.3 mm;
XEV10-40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 500 V; Rated Current: 40 A; Terminal Shape: END CAP; Rated Breaking Capacity: 20000 A;
XEV10-50-T
XEV10-50-T by Eaton Corporation is a 10x38mm electric fuse with a rated current of 50A. It has a max operating temperature of 125°C and a min operating temperature of -40°C. This fuse is commonly used for circuit protection in applications requiring a rated breaking capacity of 20000A and a rated DC voltage of 500V.
XEV10-30
XEV10-30 by Eaton Corporation is a 10x38mm electric fuse with a rated current of 30A. It has a max operating temperature of 125°C and a min operating temperature of -40°C. This fuse is commonly used for circuit protection in applications requiring a rated breaking capacity of 20000A and a rated DC voltage of 500V.
XEV10-40-T
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 500 V; Rated Current: 40 A; Terminal Shape: TAB/BLADE; Minimum Operating Temperature: -40 Cel;
XEV10-20-1P
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 500 V; Rated Current: 20 A; Terminal Shape: TAB/BLADE; Fuse Size: 10x38mm;
XEV10-5-T
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 500 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE; Fuse Size: 10x38mm;
XEV10-50-B
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 500 V; Rated Current: 50 A; Terminal Shape: TAB/BLADE; Nominal Joule Integral: 2740 J;
XEV10-50-P
XEV10-50-P9
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 500 V; Rated Current: 50 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 10.3 mm;
XEV10-50-RP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 500 V; Rated Current: 50 A; Terminal Shape: TAB/BLADE; Minimum Operating Temperature: -40 Cel;
XEV10-20-B
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 500 V; Rated Current: 20 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 20000 A;
XEV10-40-B
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 500 V; Rated Current: 40 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 20000 A;
XEV10-50
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 500 V; Rated Current: 50 A; Terminal Shape: END CAP; Minimum Operating Temperature: -40 Cel;
XEV10-20-P
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 500 V; Rated Current: 20 A; Terminal Shape: TAB/BLADE; Nominal Joule Integral: 761 J;
XEV10-40-RP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 500 V; Rated Current: 40 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 10.3 mm;
XEV10-5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 500 V; Rated Current: 5 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
XEV10-5-B
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved