Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): DOMED TYPE; Maximum DC Contact Current: .05 A; DC Maximum Rating R Load (Contact): .05A@12VDC;
Median Price
$0.219
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
100+ parts
1k+ parts
10k+ parts
-
Distrelec
Nova Conductors
$0.215
Ozdisan Elektronik
$0.223
Bristol Electronics
$1.125
$0.450
Rutronik
$0.110
$0.108
Vyrian
NAC Semi
$0.304
ACDS - Activité Composants Distribution Service
Rebound Electronics
Schukat
$0.205
$0.128
$0.116
Bas Electronics GmbH & Co. KG
ComSIT Distribution GmbH
ComSIT USA
LIBRA Elektronik GmbH
Aranea Global
$0.211
$0.202
Continental Prestige Electronics
Argo Parts USA
$0.209
Advanced Electronics
Aztec Data Supply Inc.
$3.323
Perfect Parts
Authorized Procurement Solutions
Abacus Technologies
Glotronic Ltd.
GreenTree Electronics
Cyclops Electronics Ltd (Excess)
Eastek
Keypad Switches DTSM-65N-V-T/R attributes and parameters. Explore more Keypad Switches devices from Diptronics Manufacturing
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
Circuit Config:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum DC Contact Voltage:
Electrical Life:
Mounting Feature:
No. of Switches:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
DTSM-65N-V-T/R Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.40
SB
Diptronics Manufacturing Inc., founded in 1985, is a IATF 16949 and ISO 14001 certified manufacturer specializing in DIP, Tact, Rotary, Slide, Detector, Multi-functional, Micro and Illuminated switch manufacturing. Five major production sites were established in China and one in Vietnam since 1993—Zhuhai, Jiangsu, Jiangxi, Zhongshan, and Hanoi. With complete production lines, from raw materials to finished products including press, injection, plating, mold processing, LED bonding, and automatic machine assembling are integrated in house. Diptronics can therefore offer customers timely delivery with superior quality. Our switches are selling to more than 100 countries worldwide. Diptronics switches can be widely used in IOT applications, such as cloud device, smart home, automotive, white goods, health care products, industry, security telecommunication…, etc. Today, Diptronics switches account for about 60% of global notebook market switch demand. In line with market expectation, Diptronics is one of a few companies in the industry that has in-house assembly line for both LED bonding and LED switches. Diptronics continues to focus on the switch business and commits to develop new technologies for smart phone, automotive and Illuminated switches. Our goal is to release a variety of switch products for our customers to fulfill the fast changing market demand.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
1N4148WS
Surge Components
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Lite-on Semiconductor
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
Protek Devices
1.14.001.503/0000
Rafi & Kg
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): KEYPAD; Contact Function: (N.O.) (N.C.); Solderability: WAVE;
EVQPF008K
Panasonic
The Panasonic EVQPF008K is a SPST keypad switch with 100000 cycles electrical life. It operates b/w -20 to 70 °C and has a max contact voltage of 15V. Ideal for applications requiring momentary switch action, such as consumer electronics and industrial control systems.
MX1A-C1NW
The Cherry
KEYPAD SWITCH; Manufacturer Series: MX;
K6B1.52NOD
C & K Components
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Contact Function: (N.O.) (N.C.); Solderability: HAND/WAVE; PCB Hole Count: 6;
7914J-1-000E
Bourns
Bourns 7914J-1-000E is a waterproof keypad switch with stainless steel housing and phosphor bronze terminals. It has SPST switch function, gold-plated contacts, and operates b/w -55°C to 125°C. Ideal for applications requiring snap action contact timing and surface mount installation.
5GSH93561R
Apem Components
The Apem Components 5GSH93561R keypad switch features POLYPHENYLENE SULPHIDE housing, COPPER TIN ALLOY terminals, and WHITE LED illumination. With an IP67 sealing rating, it is ideal for applications requiring a SPST switch with 10000000 cycle electrical life. Suitable for use in environments ranging from -30 to 85 °C, this MOMENTARY-TACTILE switch offers reliable performance.
5GTH93522
The Apem Components 5GTH93522 keypad switch features a POLYPHENYLENE SULPHIDE housing, COPPER TIN ALLOY terminals, and GREEN LED illumination. With an IP67 sealing rating, it is ideal for applications requiring a SPST switch function in environments with temperatures ranging from -30 to 85 °C. The switch offers a max DC contact voltage of 24V and an electrical life of 10M cycles.
CS11028.0F160J
Cit Relay & Switch
CS11028.0F160J by Cit Relay & Switch is a SPST Keypad Switch with SILVER plating, suitable for applications requiring 100000 cycles of Electrical Life. It features NYLON housing, BRASS terminals, and PHOSPHOR BRONZE contacts, offering an operating force of 1.57N and max DC contact voltage of 50V. Ideal for surface mount applications in various electronic devices.
KSR221GLFS
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): SOFT TYPE; Solderability: REFLOW; No. of Switches: 1;
EVQPE104K
The Panasonic EVQPE104K is a SPST keypad switch with 50000 cycles electrical life, 1.5N max operating force, and 10ms contact bounce time. Ideal for surface mount applications in devices requiring momentary switch action at temperatures ranging from -30 to 85°C.
RS-282G05A3SMRT
RS-282G05A3SMRT by C & K Components is a POLYAMIDE keypad switch with 50000 cycles electrical life and 100000000 ohm insulation resistance. It features SPST switch function, SILVER end contact plating, and 0.25mm actuator travel. Ideal for applications requiring a MOMENTARY-TACTILE KEYPAD SWITCH with 2.94N max operating force in temperatures ranging from -20 to 70°C.
EVQPQHB55
The Panasonic EVQPQHB55 keypad switch offers SPST switch function with 200000 cycles electrical life. With a max operating force of 2.1N, it is ideal for applications requiring momentary switch action. This surface mount straight termination type switch has a body width of 4.5mm and operates b/w -20 to 70°C temperature range.
EVQQ2503W
KEYPAD SWITCH;
1-1825027-1
TE Connectivity 1-1825027-1 is a black nylon keypad switch with copper alloy terminals. It offers SPST switch function, 100000 cycle electrical life, and 0.25mm actuator travel. Ideal for panel mounting applications requiring momentary-tactile switch action at temperatures ranging from -20 to 105°C.
K5V1BU43T
K5V1BU43T by C & K Components is a SPDT keypad switch with 25000 cycles electrical life. Featuring blue LED illumination, it has a max DC contact voltage of 32V and insulation resistance of 1000000000 ohm. Ideal for applications requiring dust-proof sealing, this switch operates b/w -40 to 85 °C with a max operating force of 4N.
KSS333GLFG
Itt Cannon
KSS333GLFG by ITT Cannon is a SPST keypad switch with 100000 cycle electrical life and 0.2VA@32VDC DC max power rating. With IP40 sealing, it is ideal for applications requiring a large type actuator, such as industrial control panels or medical devices.
KST221GLFS
KST221GLFS by ITT Cannon is a 6.2mm keypad switch with SPST function, IP40 sealing, and soft type actuator. It operates b/w -40°C to 85°C, suitable for surface mount applications requiring 2N operating force and 0.01A@32VDC contact rating. Ideal for electronics requiring momentary-tactile switch action in tape and reel packaging.
EVQP7J01K
The Panasonic EVQP7J01K is a SPST keypad switch with 100000 cycles electrical life, 1.6N max operating force, and 10ms contact bounce time. Ideal for surface mount-right angle applications, it has a max DC contact voltage of 12V and operates b/w -20°C to 70°C.
JJJHLUG200NOPMRTR
TE Connectivity's JJJHLUG200NOPMRTR is a BROWN SPST Keypad Switch with 0.05A AC/DC contact current. Featuring STAINLESS STEEL end contacts and SILVER plating, it is ideal for PANEL MOUNT applications requiring OFF-(ON) functionality.
B3U-1100PM-B
Omron
Omron's B3U-1100PM-B keypad switch offers 200000 cycles electrical life, IP40 sealing, and SPST switch function. With a plunger type actuator, it is ideal for applications requiring momentary-tactile switch action in environments with temperatures ranging from -25 to 70°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DTSM-61N-V-T/R
The Apem Components DTSM-61N-V-T/R is a brown keypad switch with SPST function, dome type actuator, and 200000 cycle electrical life. It operates b/w -25 to 70 °C and has a max DC contact voltage of 12V. Ideal for surface mount applications requiring momentary-tactile switch action.
Diptronics Manufacturing
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): DOMED TYPE; Switch Action: MOMENTARY-TACTILE; Circuit Config: 1X1;
DTSM-32N-V-T/R
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): PUSHBUTTON; Solderability: HAND; No. of Switches: 1;
DTSM-61R-V-T/R
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): DOMED TYPE; Packing Method: TAPE AND REEL; Maximum DC Contact Current: .05 A;
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Type (Actuator): PUSHBUTTON; Termination Type: SOLDER; Maximum Operating Temperature: 70 Cel; Body Width: 6.1976 inch;
DTSM-65N-V-T/R
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): PUSHBUTTON; DC Maximum Rating R Load (Contact): 0.05A@12VDC; Length (Actuator): .236 inch;
DTSM-31N-V-T/R
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): PUSHBUTTON; Solderability: HAND; Insulation Resistance: 100000000 ohm;
DTSM-32N-V-B
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): PUSHBUTTON; Solderability: HAND; Contact Resistance: 100 mohm;
DTSM-65R-V-T/R
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): DOMED TYPE; Packing Method: TAPE AND REEL; DC Maximum Rating R Load (Contact): .05A@12VDC;
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): PUSHBUTTON; No. of Switches: 1; Maximum DC Contact Current: .05 A;
DTSM-24N-S-V-T/R
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): PUSHBUTTON; Packing Method: TR; Maximum DC Contact Current: .05 A;
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): PUSHBUTTON; Length (Actuator): .149 inch; Maximum DC Contact Voltage: 12 V;
DTSM-31R-V-T/R
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): PUSHBUTTON; Solderability: HAND; Center Contact Plating: SILVER;
DTSM-62N-V-T/R
The Apem Components DTSM-62N-V-T/R is a brown keypad switch with SPST function and 200000 cycles electrical life. It operates b/w -25 to 70 °C, with a max force of 2.06 N. Ideal for surface mount applications requiring momentary-tactile switch action at a max DC contact voltage of 12V and current of 0.05A.
DTSM-31N-V-B
DTSM-61Y-V-T/R
DTSM-61Y-V-T/R by Apem Components is a yellow keypad switch with a 50000 cycle electrical life. It has a body width of 6.1976 inch and can operate in temperatures ranging from -25 to 70 °C. This surface mount straight switch is ideal for applications requiring a pushbutton type actuator and max DC contact voltage of 12V.
DTSM-31N-B
DTSM-31N-V
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): PUSHBUTTON; Solderability: HAND; Maximum DC Contact Voltage: 12 V;
DTSM-61N-S-Q-T/R
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Type (Actuator): PUSHBUTTON; Color (Actuator): BROWN; Body Width: 6.1976 inch; DC Maximum Rating R Load (Contact): 0.05A@12VDC;
DTSM-65N-S-Q-B
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): PUSHBUTTON; Maximum Operating Force: 2.06 N; Body Length/Diameter: 6.1976 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved