Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.8mm; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Maximum Supply Voltage: 3.63 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
AZTECH Wire
$21.560
Authorized Procurement Solutions
Northwest PG Solutions
Native Components
XO Clock Oscillators FNC500162 attributes and parameters. Explore more XO Clock Oscillators devices from Diodes Incorporated
Additional Features:
Frequency Adjustment (Mechanical):
Mounting Feature:
Oscillator Type:
Output Load:
Physical Dimension:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
FNC500162 Oscillators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
2N7002-T1-E3
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Brightking
Telefunken Microelectronics
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3203C
Idec
ROTARY SWITCH;
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
LTC6908HS6-1#PBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 23; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 125 Cel;
ASEMPLV-156.250MHZ-LR-T
Abracon
Abracon's ASEMPLV-156.250MHZ-LR-T is a CMOS XO Clock Oscillator with LVDS technology, operating at 156.25 MHz frequency range. It has a compact size of 3.2mm x 2.5mm x 0.85mm and can handle temperatures from -40 to 85 °C, making it suitable for various applications requiring precise timing in electronic devices.
LTC6906IS6#TR
Analog Devices
LTC6906IS6#TR by Analog Devices is a CMOS XO Clock Oscillator with 3.6V max supply voltage, 5 pF output load, and 25 ms rise time. Ideal for applications requiring precise timing such as communication systems, industrial automation, and test equipment due to its compact size and wide operating temperature range of -40°C to 85°C.
ASEMDHC-L-R
ASEMDHC-L-R by Abracon is a 156.25 MHz HSCL XO Clock Oscillator with 25% frequency stability, CMOS technology, and 3.6V max supply voltage. Ideal for applications requiring precise timing in a compact 3.2mm x 2.5mm x 0.85mm surface mount package.
VCC4-B3F-100M000000TR
VCC4-B3F-100M000000TR by Microchip Technology is a ceramic XO Clock Oscillator with 100 MHz frequency stability of 25%. Operating at 3.3V, it has MIL-STD-883 screening and CMOS oscillator type. Ideal for applications requiring precise timing in harsh environments.
511BBA106M250BAG
Skyworks Solutions
LVDS; JESD-609 Code: e4; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
DSC1001DL5-100.0000T
DSC1001DL5-100.0000T by Microchip Technology is a CMOS XO Clock Oscillator with a frequency stability of 10%. It operates at a nominal voltage of 3.3V and has a max operating temperature of 105°C. This oscillator is commonly used in automotive applications due to its AEC-Q100 screening level and small physical dimension of 2.5mm x 2.0mm x 0.85mm.
SIT1602BI-21-18S-33.330000E
Sitime
SIT1602BI-21-18S-33.330000E by Sitime is a PLASTIC/EPOXY XO Clock Oscillator with 20% Frequency Stability, 1.8V Nominal Voltage, and MIL-STD-883F Screening Level. Ideal for applications requiring precise timing at 33.33 MHz such as communication systems or industrial automation due to its LVCMOS/HCMOS Oscillator Type and compact size of 3.2mm x 2.5mm x 0.85mm for surface mount installation.
Silicon Labs
SG-8018CA40.0000M-TJHPA3
Seiko Epson
SG-8018CA40.0000M-TJHPA3 by Seiko Epson is a 40 MHz XO Clock Oscillator with CMOS type, 4 terminals, and 15 pF output load. It operates b/w -40 to 105 °C and has a rise time of 6 ms. Ideal for applications requiring precise timing in electronic devices.
48.000MHZXO91050UITA
Euroquartz
Euroquartz 48.000MHZXO91050UITA is a 48MHz XO Clock Oscillator with HCMOS/LSTTL type, 3.3V nominal voltage, and 50% frequency stability. Ideal for applications requiring precise timing in temperature range of -40 to 85°C.
LTC6908IDCB-1#TRMPBF
LTC6908IDCB-1#TRMPBF by Analog Devices is a CMOS XO Clock Oscillator with 40% Frequency Stability, 5.5V Max Supply Voltage, and 5pF Output Load. Ideal for applications requiring precise timing such as communication systems, industrial automation, and test equipment due to its compact size and wide operating temperature range of -40°C to 85°C.
ASV-48.000MHZ-EJ-T
Abracon's ASV-48.000MHZ-EJ-T is a 48 MHz XO Clock Oscillator with 20% frequency stability, HCMOS/TTL type, and 3.63 V max supply voltage. Ideal for applications requiring precise timing in electronics with a need for high-speed data processing and communication systems.
DSC1123CI2-125.0000
Micrel
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e4;
ASDMB-50.000MHZ-LC-T
Abracon's ASDMB-50.000MHZ-LC-T is a 50MHz CMOS XO Clock Oscillator with 4 terminals, operating from -40°C to 85°C. It has a low supply current of 16mA at voltages of 1.8V/3.3V, suitable for surface mount applications in various electronic devices.
570BCA000305DG
570BCA000305DG by Silicon Labs is a XO Clock Oscillator with 7% Frequency Stability, LVDS Oscillator Type, and 3.63V Max Supply Voltage. Ideal for applications requiring precise timing such as telecommunications equipment and networking devices due to its high stability and low rise time.
EC2600TS-120.000MTR
Ecliptek
LVCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 100 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.6mm;
AMPMDFB-25.0000T3
Abracon's AMPMDFB-25.0000T3 is a 25MHz XO Clock Oscillator with 25% frequency stability, CMOS type, and 10pF output load. Ideal for applications requiring precise timing in electronics with a voltage range of 1.71V to 3.63V and operating temperatures from -40°C to 85°C.
ASDMB-24.000MHZ-XY-T
Abracon's ASDMB-24.000MHZ-XY-T is a 24MHz XO Clock Oscillator with 10% frequency stability, 15pF output load, and CMOS type. Ideal for applications requiring precise timing in temperature range of -40°C to 105°C.
AX7DBF3-148.5000C
Abracon's AX7DBF3-148.5000C is a 148.5 MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. It operates at a nominal voltage of 2.5 V and has a compact size of 7.0mm x 5.0mm x 1.8mm, making it ideal for surface mount installations in temperature-sensitive environments up to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FNC500131
Diodes Incorporated
LVCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 3.3 V;
FNC500020
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Output Load: 10 LS TTL, 15 pF; Nominal Supply Voltage: 3.3 V; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR;
FNC500129
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Physical Dimension: 7.0mm x 5.0mm x 1.8mm;
FNC500084
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V; Output Load: 10 LS TTL, 15 pF; Physical Dimension: 7.0mm x 5.0mm x 1.8mm;
FNC500125
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V; Nominal Supply Voltage: 3.3 V; Minimum Supply Voltage: 2.97 V;
FNC500071
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.8mm; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Minimum Supply Voltage: 2.97 V;
FNC500132
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V; Physical Dimension: 7.0mm x 5.0mm x 1.8mm; Output Load: 10 LS TTL, 15 pF;
FNC500002
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V; Physical Dimension: 7.0mm x 5.0mm x 1.8mm; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR;
FNC500030
FNC500088
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Output Load: 10 LS TTL, 15 pF; Maximum Supply Voltage: 3.63 V;
FNC500103
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Output Load: 10 LS TTL, 15 pF; Physical Dimension: 7.0mm x 5.0mm x 1.8mm; Minimum Supply Voltage: 2.97 V;
FNC500123A
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 3.3 V; Physical Dimension: 7.0mm x 5.0mm x 1.8mm; Minimum Supply Voltage: 2.97 V;
FNC500053
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.8mm; Nominal Supply Voltage: 3.3 V; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR;
FNC500011
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 3.3 V; Maximum Supply Voltage: 3.63 V; Minimum Supply Voltage: 2.97 V;
FNC500111
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Maximum Supply Voltage: 3.63 V; Physical Dimension: 7.0mm x 5.0mm x 1.8mm;
FNC500078
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V; Minimum Supply Voltage: 2.97 V; Physical Dimension: 7.0mm x 5.0mm x 1.8mm;
FNC500001
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Output Load: 10 LS TTL, 15 pF; Minimum Supply Voltage: 2.97 V; Physical Dimension: 7.0mm x 5.0mm x 1.8mm;
FNC500006
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Output Load: 10 LS TTL, 15 pF; Nominal Supply Voltage: 3.3 V;
FNC500043
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Minimum Supply Voltage: 2.97 V; Maximum Supply Voltage: 3.63 V;
FNC500115
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Physical Dimension: 7.0mm x 5.0mm x 1.8mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved