Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Maximum Supply Voltage: 3.63 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$8.768
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
$9.645
$8.680
QUARKTWIN TECHNOLOGY LTD
XO Clock Oscillators FNA000081 attributes and parameters. Explore more XO Clock Oscillators devices from Diodes Incorporated
Additional Features:
Frequency Adjustment (Mechanical):
Mounting Feature:
Oscillator Type:
Output Load:
Physical Dimension:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
FNA000081 Oscillators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
4554
Jw Miller Magnetics
Other Semiconductors;
1N4148
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ROHM
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
531BB300M000DGR
Silicon Labs
Silicon Labs' 531BB300M000DGR is a PLASTIC/EPOXY XO Clock Oscillator with LVDS type, operating at 10-945 MHz freq range. It has 20% stability, 3.63V max supply voltage, and consumes 98mA current. Ideal for applications requiring precise timing in temperature-sensitive environments.
510DCA100M000AAGR
HCSL; Power Supplies (V): 3.3; Qualification: Not Qualified; JESD-609 Code: e4; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
LTC6905CS5-80#TRMPBF
Analog Devices
LTC6905CS5-80#TRMPBF by Analog Devices is a CMOS XO Clock Oscillator with 20% frequency stability, operating at 80 MHz. It has a max supply voltage of 5.5V and output load of 5pF, suitable for surface mount applications in temperature-sensitive electronic devices.
ASEMB-1.0000MHZ-LY-T
Abracon
Abracon's ASEMB-1.0000MHZ-LY-T is a 1MHz XO Clock Oscillator with 10% frequency stability, 15pF output load, and CMOS oscillator type. Ideal for applications requiring precise timing in temperature range of -40 to 85°C.
564AAAA002021BBG
Silicon Labs' 564AAAA002021BBG XO Clock Oscillator features LVPECL type, 3.465V max supply voltage, and 50 OHM output load. Ideal for applications requiring precise timing at frequencies ranging from 0.2 MHz to 3000 MHz in a compact 5mm x 3.2mm x 1.33mm package.
DSC1123CI2-125.0000
Ael Crystals
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
534GB000559DGR
Skyworks Solutions
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V;
DSC1121AI2-162.0000T
Microchip Technology
DSC1121AI2-162.0000T by Microchip: 162MHz XO Clock Oscillator with 25% Stability, 3.6V Max Supply Voltage, and 15pF Output Load. Ideal for applications requiring precise timing in a compact form factor.
SG-3030JC32.7680KB3
Seiko Epson
SG-3030JC32.7680KB3 by Seiko Epson is a CMOS XO Clock Oscillator with 120% frequency stability, 15 pF output load, and 0.002 mA max supply current. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, with dimensions of 10.5mm x 5mm x 2.7mm for surface mount installation.
570FAB000433DGR
Silicon Labs' 570FAB000433DGR is a LVDS XO Clock Oscillator with 50% frequency stability, operating at frequencies up to 1417.5 MHz. It has a max supply voltage of 2.75 V and output load of 100 Ohm, making it ideal for high-speed applications requiring precise timing control.
511FBA125M000AAG
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V; Additional Features: ENABLE/DISABLE FUNCTION; COMPLEMENTARY OUTPUT;
ASDMB-50.000MHZ-XY-T
Abracon's ASDMB-50.000MHZ-XY-T is a 50MHz XO Clock Oscillator with 10% frequency stability, ideal for CMOS applications. It operates at 3.3V with a max supply current of 15mA and features a compact size of 2.5mm x 2.0mm x 0.85mm, suitable for surface mounting in temperature ranges from -40°C to 105°C.
CB3LV-3C-50M000000-T
Cts
CB3LV-3C-50M000000-T by Cts is a 50 MHz XO Clock Oscillator with 50% Frequency Stability, HCMOS/TTL type. Operating at 3.3V, it has a 30 pF output load and dimensions of 7.0mm x 5.0mm x 1.8mm. Ideal for applications requiring precise timing in electronic devices with surface mount requirements.
ASEMB-12.000MHZ-LY-T
Abracon ASEMB-12.000MHZ-LY-T is a 12MHz XO Clock Oscillator with 10% frequency stability, 15pF output load, and CMOS oscillator type. Ideal for applications requiring precise timing in temperature range -40 to 85°C. Dimensions: 3.2mm x 2.5mm x 0.85mm, suitable for surface mounting with NICKEL PALLADIUM GOLD terminal finish.
24.000MHZXO91050UITA
Euroquartz
Euroquartz 24.000MHZXO91050UITA is a 24MHz XO Clock Oscillator with 50% frequency stability, CMOS/LSTTL type, and 3.465V max supply voltage. Ideal for applications requiring precise timing in temperature range of -40 to 85°C.
ASDMB-7.3728MHZ-XY-T
Abracon's ASDMB-7.3728MHZ-XY-T is a 7.3728 MHz XO Clock Oscillator with 10% frequency stability, ideal for CMOS applications. It operates at 3.3V with a max supply current of 15mA and output load of 15pF, suitable for surface mounting in various electronic devices.
511ABA156M250AAGR
LVPECL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.8mm;
DSC1001CL2-100.0000T
DSC1001CL2-100.0000T by Microchip Technology is a CMOS XO Clock Oscillator with 25% Frequency Stability, 10 KOHM Output Load, and 3.3 V Supply Voltage. Ideal for applications requiring precise timing at temperatures ranging from -40 to 105 °C, such as telecommunications and networking equipment.
DSC1123CI2-125.0000T
Micrel
LTC6908HS6-2#TRPBF
LTC6908HS6-2#TRPBF by Analog Devices is a CMOS XO Clock Oscillator with 40% frequency stability, operating at frequencies from 0.05 MHz to 10 MHz. It has a max supply voltage of 5.5 V and output load of 5 pF, suitable for applications requiring precise timing in temperature-sensitive environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FNA000009
Diodes Incorporated
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.8mm; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Output Load: 10 LS TTL, 15 pF;
FNA000016
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Physical Dimension: 7.0mm x 5.0mm x 1.8mm;
FNA000064
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Output Load: 10 LS TTL, 15 pF; Minimum Supply Voltage: 2.97 V; Physical Dimension: 7.0mm x 5.0mm x 1.8mm;
FNA000064A
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Output Load: 10 LS TTL, 15 pF; Nominal Supply Voltage: 3.3 V;
FNA000065
FNA000072
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Output Load: 10 LS TTL, 15 pF; Minimum Supply Voltage: 2.97 V;
FNA000073
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Physical Dimension: 7.0mm x 5.0mm x 1.8mm; Minimum Supply Voltage: 2.97 V;
FNA000083
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Nominal Supply Voltage: 3.3 V;
FNA000085Q
FNA000086
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 3.3 V; Minimum Supply Voltage: 2.97 V; Maximum Supply Voltage: 3.63 V;
FNA000087
FNA000088Z
LVCMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V; Nominal Supply Voltage: 3.3 V; Maximum Supply Voltage: 3.63 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved