Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Minimum Supply Voltage: 2.97 V; Nominal Operating Frequency: 20 MHz;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Ampacity Inc.
1+ parts
$2.010
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
Native Components
XO Clock Oscillators FN2000091 attributes and parameters. Explore more XO Clock Oscillators devices from Diodes Incorporated
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Mounting Feature:
Nominal Operating Frequency:
Oscillator Type:
Output Load:
Physical Dimension:
Maximum Rise Time:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
FN2000091 Oscillators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
General Instrument
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
Good-ark Electronics
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358AN
NXP Semiconductors
EU2B-YS2J03C
Idec
ROTARY SWITCH;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
SG3225VAN200.000000M-KEGA3
Seiko Epson
SG3225VAN200.000000M-KEGA3 by Seiko Epson is a 200 MHz XO Clock Oscillator with LVDS oscillator type and 30% frequency stability. It has a compact physical dimension of 3.2mm x 2.5mm x 1.05mm, making it suitable for surface mount applications in various electronic devices.
AK5DAF1-100.0000T2
Abracon
AK5DAF1-100.0000T2 by Abracon is a 100 MHz XO Clock Oscillator with LVDS oscillator type and 25% frequency stability. It has a max supply voltage of 3.63 V and is suitable for surface mount applications.
48.000MHZXO91050UITA
Euroquartz
Euroquartz 48.000MHZXO91050UITA is a 48MHz XO Clock Oscillator with HCMOS/LSTTL type, 3.3V nominal voltage, and 50% frequency stability. Ideal for applications requiring precise timing in temperature range of -40 to 85°C.
ASFLMB-1.0000MHZ-LR-T
Abracon's ASFLMB-1.0000MHZ-LR-T is a 1MHz XO Clock Oscillator with 25% frequency stability, CMOS type, and 15pF output load. Ideal for applications requiring precise timing in a compact form factor like IoT devices and wearables due to its small size (5.0mm x 3.2mm x 0.85mm) and wide operating temperature range (-40°C to 85°C).
XLH736025.002000I
Integrated Device Technology
HCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.3mm;
LTC6900IS5#TRPBF
Analog Devices
LTC6900IS5#TRPBF by Analog Devices is a CMOS XO Clock Oscillator with 2.5% frequency stability, operating from 0.1 MHz to 20 MHz. It has a max supply voltage of 5.5V and low current output of 4A, suitable for applications requiring precise timing in compact designs like IoT devices.
DSC1001CC1-125.0000T
Microchip Technology
DSC1001CC1-125.0000T by Microchip Technology is a 125 MHz XO Clock Oscillator with 50% frequency stability and AEC-Q100 screening level. It operates at a nominal voltage of 3.3V, suitable for applications requiring precise timing in automotive electronics and industrial control systems.
XLL536160.000000I
Renesas Electronics
Renesas Electronics XLL536160.000000I is a 160 MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. It operates at a nominal voltage of 3.3 V and has a max rise time of 0.4 ms, making it ideal for high-speed communication systems in industrial and networking equipment.
DSC1001DL5-025.0000T
Microchip's DSC1001DL5-025.0000T is a 25 MHz XO Clock Oscillator with 10% frequency stability, AEC-Q100 screening level, and 15 pF output load. Ideal for automotive applications due to its CMOS oscillator type and compact size of 2.5mm x 2.0mm x 0.85mm.
SG-615P25.0000MC0:ROHS
Seiko Epson's SG-615P25.0000MC0:ROHS is a 25 MHz XO Clock Oscillator with 100% frequency stability, suitable for applications requiring precise timing. It operates at a max supply voltage of 5.5 V and has a compact size of 14.0mm x 8.65mm x 4.7mm, making it ideal for surface mount installations in temperature-sensitive environments.
DSC1101AM1-160.0000
DSC1101AM1-160.0000 by Microchip: XO Clock Oscillator with 160MHz frequency, 50% stability, and CMOS type. Ideal for applications requiring precise timing in a compact 7.0mm x 5.0mm x 0.9mm package. Operates b/w -55 to 125 °C with low rise/fall times and surface mount feature.
DSC1001DI5-025.0000T
DSC1001DI5-025.0000T by Microchip Technology is a CMOS XO Clock Oscillator with 25 MHz frequency, 10% stability, and 3.3 V supply voltage. It has a compact size of 2.5mm x 2.0mm x 0.85mm and is ideal for applications requiring precise timing in temperature-sensitive environments.
SG-8018CA40.0000M-TJHPA3
SG-8018CA40.0000M-TJHPA3 by Seiko Epson is a 40 MHz XO Clock Oscillator with CMOS type, 4 terminals, and 15 pF output load. It operates b/w -40 to 105 °C and has a rise time of 6 ms. Ideal for applications requiring precise timing in electronic devices.
511FBA125M000AAG
Skyworks Solutions
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V; Additional Features: ENABLE/DISABLE FUNCTION; COMPLEMENTARY OUTPUT;
ASEMB-8.000MHZ-LY-T
Abracon's ASEMB-8.000MHZ-LY-T is a 4-terminal CMOS XO Clock Oscillator with 8MHz frequency, suitable for applications requiring a supply voltage of 1.8/3.3V. With a compact size of 3.2mm x 2.5mm x 0.85mm and operating temperature range from -40 to 85°C, it is ideal for surface mount technology in various electronic devices.
DSC1123CI2-125.0000
Ael Crystals
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
DSC1123BI2-200.0000
Microchip Technology's DSC1123BI2-200.0000 is a 200 MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. It operates b/w -40°C to 85°C, with a supply voltage range of 2.25V to 3.6V and output load of 100Ω, making it ideal for various electronic devices needing reliable clock signals.
SIT1532AC-J5-DCC-32.768E
Sitime
SIT1532AC-J5-DCC-32.768E by Sitime is a PLASTIC/EPOXY XO Clock Oscillator with 75% Frequency Stability, 3.63V Max Supply Voltage, and CMOS Technology. Ideal for LVCMOS applications requiring 0.032768 MHz frequency, it operates b/w -10 to 70 °C with low power consumption of 0.0013 mA at 1.5/3.3V supplies.
CB3LV-3C-50M00000
Cts
CB3LV-3C-50M00000 by Cts is a 50 MHz XO Clock Oscillator with 50% frequency stability. It operates at a max supply voltage of 3.6V and has a max operating temperature of 70°C. This surface mount oscillator is commonly used in applications requiring precise timing and synchronization.
DSC1123CE1-125.0000
Discera
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Output Load: 100 OHM;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FN2000136
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Maximum Fall Time: 7 ns; Minimum Supply Voltage: 2.97 V;
FN2000097
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Output Load: 10 LS TTL, 15 pF; Maximum Rise Time: 7 ms; Minimum Supply Voltage: 2.97 V;
FN2000060
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V; Physical Dimension: 7.0mm x 5.0mm x 1.8mm; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR;
FN2000121
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 20 MHz; Physical Dimension: 7.0mm x 5.0mm x 1.8mm; Maximum Rise Time: 7 ms;
FN2000109
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: 7 ns; Maximum Supply Voltage: 3.63 V; Physical Dimension: 7.0mm x 5.0mm x 1.8mm;
FN2040003
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V; Output Load: 10 LS TTL, 15 pF; Maximum Rise Time: 7 ms;
FN2000004
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Output Load: 10 LS TTL, 15 pF; Maximum Fall Time: 7 ns; Maximum Rise Time: 7 ms;
FN2000106
FN2000073
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: 7 ms; Maximum Supply Voltage: 3.63 V; Maximum Fall Time: 7 ns;
FN2000119
LVCMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 3.3 V; Maximum Symmetry (%): 45/55;
FN2000113
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.8mm; Maximum Supply Voltage: 3.63 V; Nominal Supply Voltage: 3.3 V;
FN2000087
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 20 MHz; Nominal Supply Voltage: 3.3 V; Maximum Supply Voltage: 3.63 V;
FN2000135
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.8mm; Maximum Fall Time: 7 ns; Output Load: 10 LS TTL, 15 pF;
FN2000043
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 3.3 V; Output Load: 10 LS TTL, 15 pF; Minimum Supply Voltage: 2.97 V;
FN2000095
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Maximum Rise Time: 7 ms; Maximum Fall Time: 7 ns;
FN2000001
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: 7 ns; Physical Dimension: 7.0mm x 5.0mm x 1.8mm; Nominal Operating Frequency: 20 MHz;
FN2000010
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V; Nominal Supply Voltage: 3.3 V; Maximum Fall Time: 7 ns;
FN2000085
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: 7 ms; Output Load: 10 LS TTL, 15 pF; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR;
FN2000118
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 20 MHz; Maximum Operating Frequency: 166 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved