Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Diodes Inc. FL4000205Z crystal oscillator offers 10 ppm frequency tolerance, 10% stability, and 40 ohm series resistance. Ideal for applications requiring a 40 MHz nominal operating frequency in surface mount configurations with gold over nickel terminal finish.
Median Price
$0.444
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.560
100+ parts
$0.426
1k+ parts
$0.371
10k+ parts
$0.272
DigiKey
$0.590
$0.386
-
Arrow
$0.329
Verical
Nova Conductors
$0.340
Vyrian
Continental Prestige Electronics
$0.333
Argo Parts USA
Netroflash
Ampacity Inc.
$0.510
High precision frequency control ensures accurate timekeeping and synchronization in applications that require precise timing.
Stable frequency output is essential for consistent performance in communication systems, ensuring minimal signal interference or drift.
Low series resistance minimizes power consumption and heat generation, making the oscillator efficient for prolonged use.
Wide temperature range allows for reliable operation in various environmental conditions, enhancing the oscillator's versatility.
Gold over nickel terminal finish provides excellent conductivity and corrosion resistance, ensuring long-term performance and durability.
Parallel fundamental crystal design offers high frequency stability and low noise, making it suitable for precision applications.
The 40 MHz frequency is ideal for many communication and electronic systems, providing a common standard for compatibility.
Low aging rate indicates minimal frequency drift over time, ensuring long-term accuracy and reliability of the oscillator.
Optimal load capacitance ensures efficient energy transfer and stable oscillation, enhancing overall performance of the oscillator.
Surface mount design facilitates easy and secure installation on circuit boards, saving space and simplifying assembly processes.
Low drive level requirement minimizes power consumption and extends the operational lifespan of the oscillator, reducing overall maintenance costs.
Compact size and lightweight construction make the oscillator easy to integrate into electronic devices without adding bulk or weight.
High maximum operating temperature ensures reliable performance even in elevated thermal environments, increasing the oscillator's overall durability.
Crystal Oscillators FL4000205Z attributes and parameters. Explore more Crystal Oscillators devices from Diodes Incorporated
Additional Features:
Aging:
Crystal or Resonator Type:
Drive Level:
Frequency Stability:
Frequency Tolerance:
JESD-609 Code:
Load Capacitance:
Mounting Feature:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Physical Dimension:
Series Resistance:
Terminal Finish:
FL4000205Z Crystals & Resonators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.60.00.60
SB
PCN Packaging - Labeling Change 30/Sep/2016 Labeling Change Revision 12/Apr/2017
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Wuxi Xuyang Electronic
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SPC TECHNOLOGY/ MULTICOMP
Shandong Yiguang Electronic Joint Stock
ABM8W-12.0000MHZ-6-D2X-T3
Abracon
Abracon's ABM8W-12.0000MHZ-6-D2X-T3 crystal oscillator operates at 12 MHz with a frequency tolerance of 20 ppm and stability of 20%. Ideal for applications requiring precise timing, it features a parallel fundamental crystal type, surface mounting feature, and gold over nickel terminal finish.
ECS-.327-6-34Q-CN-TR
Ecs International
ECS-0.327-6-34Q-CN-TR by Ecs International is a crystal oscillator with 10 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at frequencies of 0.032768 MHz, such as in telecommunications equipment or industrial automation systems.
R1612-25.000-8-F-1515-TR
Raltron Electronics
Raltron Electronics' R1612-25.000-8-F-1515-TR crystal oscillator offers 15 ppm frequency tolerance and stability, with a series resistance of 150 ohm. Ideal for applications requiring a 25 MHz nominal operating frequency, such as telecommunications equipment and industrial automation systems.
12.88668
Geyer Electronic
12.88668 crystal oscillator by Geyer Electronic offers a frequency tolerance of 30 ppm and stability of 50%. With a nominal operating frequency of 27 MHz, it is ideal for applications requiring precise timing such as telecommunications equipment or industrial automation systems. The compact surface mount design with nickel/gold terminal finish makes it suitable for space-constrained PCB layouts.
445A35J25M00000
Cts
The Cts 445A35J25M00000 is a crystal oscillator with a frequency tolerance of 30 ppm and frequency stability of 50%. It is commonly used in applications requiring precise timing, such as telecommunications and industrial automation.
TSX-322516.0000MF18X-AC6
Seiko Epson
TSX-322516.0000MF18X-AC6 by Seiko Epson is a 16 MHz crystal oscillator with 10 ppm frequency tolerance and 18% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features GOLD OVER NICKEL terminal finish for durability in surface mount installations.
ABM3B-12.000MHZ-B-2-T
ABM3B-12.000MHZ-B-2-T by Abracon is a 12 MHz crystal oscillator with a frequency tolerance of 20 ppm and frequency stability of 50%. It is commonly used in applications requiring precise timing, such as telecommunications and industrial automation.
A-4.000-18
Raltron Electronics' A-4.000-18 crystal oscillator offers 50 ppm frequency tolerance, 100% stability, and 80 ohm series resistance. Ideal for applications requiring a 4 MHz nominal operating frequency, such as industrial automation and telecommunications systems.
403I35D33M00000
Cts 403I35D33M00000 crystal oscillator offers 30 ppm frequency tolerance, 50% stability, and 40 ohm series resistance. Ideal for applications requiring a parallel fundamental type resonator with a nominal frequency of 33 MHz. Operating range from -40°C to 85°C makes it versatile for various electronic devices.
9HT10-32.768KDZC-T
Txc
9HT10-32.768KDZC-T by Txc is a crystal oscillator with 20 ppm frequency tolerance, 108% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing such as IoT devices, wearables, and communication equipment due to its compact size (3.2mm x 1.5mm x 0.75mm) and low drive level of 1 uW.
CM8V-T1A32.768KHZ12.5PF+/-20PPMTCQC
Micro Crystal Ag
CM8V-T1A32.768KHZ12.5PF+/-20PPMTCQC by Micro Crystal Ag is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. Ideal for applications requiring precise timing such as in telecommunications equipment or industrial automation systems due to its high accuracy and reliability in extreme temperature conditions from -55°C to 125°C.
FC-13532.7680KA-A0
Epson Toyocom
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/FIRST YEAR; Load Capacitance: 12.5 pF; Maximum Operating Temperature: 85 Cel;
XRCGB27M000F2P00R0
Murata Manufacturing
Murata Manufacturing's XRCGB27M000F2P00R0 crystal oscillator operates at 27 MHz with 20 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing, such as telecommunications equipment and industrial automation systems.
ATS120C-E
ATS120C-E by Cts is a 12 MHz crystal oscillator with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -40°C to 85°C with low aging at 5 PPM/year. Through-hole mounting and compact size make it versatile for various electronic devices.
830009678
Wuerth Elektronik & Kg
Wurth Elektronik 830009678 crystal oscillator operates at 0.032768 MHz with 20 ppm frequency tolerance. It features 70000 ohm series resistance and NICKEL GOLD terminal finish. Ideal for applications requiring precise timing in compact electronic devices.
MC-14632.7680KA-A3:PURESN
MC-14632.7680KA-A3:PURESN by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 65000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz frequency in temperatures ranging from -40 to 85 °C.
ABM7-13.560MHZ-D-2-Y-T
ABM7-13.560MHZ-D-2-Y-T by Abracon is a 13.56 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it features a parallel fundamental crystal type, gold terminal finish, and operates b/w -40 to 85°C temperatures.
AB38T-32.768KHZ-B-7
AB38T-32.768KHZ-B-7 by Abracon is a crystal oscillator with 15 ppm frequency tolerance, 70% stability, and 30000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz frequency, such as in telecommunications equipment or industrial automation systems.
ABMM2-16.000MHZ-E2-T
ABMM2-16.000MHZ-E2-T by Abracon is a 16 MHz crystal oscillator with 20 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 70°C and features gold terminal finish with nickel barrier.
ATS12A
The Cts ATS12A crystal oscillator operates at 12 MHz with a frequency tolerance of 30 ppm and stability of 50%. Ideal for applications requiring precise timing, it features a parallel fundamental type, through-hole mounting, and low aging rate of 5 PPM/year.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FL400WFMR1
Diodes Incorporated
FL400WFMR1 by Diodes Inc. is a 40 MHz crystal oscillator with 10 ppm frequency tolerance and 10% frequency stability. It is suitable for applications requiring precise timing, such as telecommunications and industrial automation.
FL4000157Z
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 7 ppm; Aging: 3 PPM/FIRST YEAR; Minimum Operating Temperature: -20 Cel; Terminal Finish: GOLD OVER NICKEL;
FL400WFMT1
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 7 ppm; Aging: 3 PPM/FIRST YEAR; Series Resistance: 30 ohm; Nominal Operating Frequency: 40 MHz;
FL4000035
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; JESD-609 Code: e4; Series Resistance: 40 ohm; Drive Level: 10 uW;
FL4000065
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Additional Features: AT-CUT; TR; JESD-609 Code: e4; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch);
FL4000067
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Additional Features: AT-CUT; TR; Nominal Operating Frequency: 40 MHz; Series Resistance: 40 ohm;
FL4000074
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Drive Level: 10 uW; Terminal Finish: GOLD OVER NICKEL;
FL4000009
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Terminal Finish: GOLD OVER NICKEL; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Drive Level: 10 uW;
FL4000011B
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; JESD-609 Code: e4; Nominal Operating Frequency: 40 MHz; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch);
FL4000040
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Terminal Finish: GOLD OVER NICKEL; Series Resistance: 40 ohm; Nominal Operating Frequency: 40 MHz;
FL4000064
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Additional Features: AT-CUT; TR; Terminal Finish: GOLD OVER NICKEL; Series Resistance: 40 ohm;
FL4000034
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Series Resistance: 40 ohm; Drive Level: 10 uW; Nominal Operating Frequency: 40 MHz;
FL4000065S
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Drive Level: 10 uW; Terminal Finish: GOLD OVER NICKEL; Nominal Operating Frequency: 40 MHz;
FL4000010A
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Additional Features: AT-CUT; TR; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Drive Level: 10 uW;
FL4000041
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; JESD-609 Code: e4; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Series Resistance: 40 ohm;
FL4000012
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Nominal Operating Frequency: 40 MHz; Series Resistance: 40 ohm; Additional Features: AT-CUT; TR;
FL4000044
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; JESD-609 Code: e4; Additional Features: AT-CUT; TR; Drive Level: 10 uW;
FL4000050
FL4000038
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Terminal Finish: GOLD OVER NICKEL; JESD-609 Code: e4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved