Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: 5 ms; Nominal Supply Voltage: 3.3 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
AZTECH Wire
1+ parts
$19.690
100+ parts
1k+ parts
10k+ parts
Native Components
$3.463
Northwest PG Solutions
$3.499
XO Clock Oscillators FD5000046 attributes and parameters. Explore more XO Clock Oscillators devices from Diodes Incorporated
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Mounting Feature:
No. of Terminals:
Nominal Operating Frequency:
Oscillator Type:
Output Load:
Physical Dimension:
Maximum Rise Time:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
FD5000046 Oscillators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Dev BOM/DIE SOURCE 07/Feb/2024
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
LTC6908IDCB-2#TRPBF
LTC6908IDCB-2#TRPBF by Analog Devices is a CMOS XO Clock Oscillator with 40% Frequency Stability, 5.5V Max Supply Voltage, and 5pF Output Load. Ideal for applications requiring precise timing in a compact form factor such as IoT devices, wearables, and communication systems.
LTC6905IS5-133#TRMPBF
LTC6905IS5-133#TRMPBF by Analog Devices is a CMOS XO Clock Oscillator with 20% frequency stability, 5.5V max supply voltage, and 5pF output load. Ideal for applications requiring precise timing at 133MHz, such as telecommunications equipment and industrial automation systems.
LTC6995IS6-1#PBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: MATTE TIN;
KC3225K25.0000C10E00
KYOCERA AVX
KC3225K25.0000C10E00 by KYOCERA AVX is a 25 MHz XO Clock Oscillator with 50% frequency stability, CMOS type, and 15 pF output load. It operates b/w -10°C to 70°C, has a max supply voltage of 3.63 V, and requires only 5 mA max supply current. Ideal for applications requiring precise timing in compact electronic devices.
LTC6908IS6-1
LTC6908IS6-1 by Analog Devices is a CMOS XO Clock Oscillator with 40% frequency stability, operating from 0.05 MHz to 10 MHz. It has a max supply voltage of 5.5 V and output load of 5 pF, suitable for applications requiring precise timing in a compact form factor.
SIT2001BI-S1-XXX-000.FP0000E
Sitime
SIT2001BI-S1-XXX-000.FP0000E by Sitime is a PLASTIC/EPOXY XO Clock Oscillator with 20% Frequency Stability, 3.63V Max Supply Voltage, and 15pF Output Load. Ideal for LVCMOS applications requiring precise timing in a compact form factor.
LTC6905CS5-80#TRMPBF
LTC6905CS5-80#TRMPBF by Analog Devices is a CMOS XO Clock Oscillator with 20% frequency stability, operating at 80 MHz. It has a max supply voltage of 5.5V and output load of 5pF, suitable for surface mount applications in temperature-sensitive electronic devices.
ECS-2200BX-049
Ecs International
ECS-2200BX-049 by Ecs International is a XO Clock Oscillator with 100% Frequency Stability, 5.25V Max Supply Voltage, and 10 TTL Output Load. Ideal for applications requiring precise timing such as telecommunications equipment and industrial automation systems.
FXO-HC536R-12.288
Renesas Electronics
Renesas Electronics' FXO-HC536R-12.288 is a 12.288 MHz HCMOS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. It operates at a nominal voltage of 3.3 V with a max supply voltage of 3.465 V and features a compact size of 5.15mm x 3.35mm x 1.4mm for surface mounting in various electronic devices.
XO57CTECNA20M
Vishay Intertechnology
Vishay Intertechnology's XO57CTECNA20M is a 20 MHz HCMOS/TTL clock oscillator with 100% frequency stability. Operating at a max supply voltage of 5.5 V, it has a compact size of 7.0mm x 5.0mm x 1.9mm and is ideal for applications requiring precise timing in temperature-sensitive environments.
ASEMB-50.000MHZ-LC-T
Abracon
Abracon's ASEMB-50.000MHZ-LC-T is a 50MHz CMOS XO Clock Oscillator with 3.3V supply voltage, suitable for applications requiring precise timing in a compact 3.2mm x 2.5mm x 0.85mm package. Operating temperature ranges from -40°C to 85°C, making it ideal for various electronic devices and systems.
FXO-HC536R-12
Fox Electronics
HCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Package Body Material: CERAMIC;
P123-125.0M
Connor Winfield
P123-125.0M by Connor Winfield is a ceramic XO Clock Oscillator with LVPECL type, operating at 125MHz frequency. It has a 50% stability, 3.465V max supply voltage, and 90mA max supply current. Ideal for applications requiring precise timing in temperature range of 0-70°C with surface mount feature.
SIT9121AI-2C2-25E200.000000
SIT9121AI-2C2-25E200.000000 by Sitime is a 200 MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. It operates at a max supply voltage of 2.75 V and has a compact size of 5mm x 3.2mm x 0.75mm, making it ideal for surface mount installations in temperature-sensitive environments.
SIT8208AI-21-XXX-000.FP0000X
SIT8208AI-21-XXX-000.FP0000X by Sitime is a PLASTIC/EPOXY XO Clock Oscillator with 20% Frequency Stability, 3.3V Max Supply Voltage, and 15pF Output Load. Ideal for LVCMOS/LVTTL applications, it operates b/w -40 to 85 °C with a frequency range of 1MHz to 80MHz in a compact size of 3.2mm x 2.5mm x 0.75mm for surface mounting.
CB3LV-3C-25M0000-T
Cts
CB3LV-3C-25M0000-T by Cts is a 25 MHz XO Clock Oscillator with 50% Frequency Stability, HCMOS/TTL type, and 3.6V Max Supply Voltage. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, with surface mount feature for easy installation.
ASDMB-100.000MHZ-LY-T
Abracon's ASDMB-100.000MHZ-LY-T is a 100MHz XO Clock Oscillator with 10% frequency stability, CMOS technology, and 15pF output load. Ideal for applications requiring precise timing in temperature range of -40 to 85°C.
LTC6900IS5#TRPBF
LTC6900IS5#TRPBF by Analog Devices is a CMOS XO Clock Oscillator with 2.5% frequency stability, operating from 0.1 MHz to 20 MHz. It has a max supply voltage of 5.5V and low current output of 4A, suitable for applications requiring precise timing in compact designs like IoT devices.
SG-8002CA24.0000M-PCML3
Seiko Epson
SG-8002CA24.0000M-PCML3 by Seiko Epson is a ceramic XO Clock Oscillator with 24 MHz frequency, 100% stability, and 15 pF load. Ideal for applications requiring precise timing in a compact form factor like IoT devices or communication equipment.
ASFLMPC-25.000MHZ-Z-T
ASFLMPC-25.000MHZ-Z-T by Abracon is a 6-terminal CMOS XO Clock Oscillator with a frequency range of 10 MHz to 100 MHz. It operates at voltages of 2.5V to 3.3V and has a compact size of 5.0mm x 3.2mm x 0.85mm, making it suitable for surface mount applications in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FD5000007
Diodes Incorporated
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: 5 ns; Nominal Operating Frequency: 50 MHz;
FD5000008
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 50 MHz; Minimum Supply Voltage: 2.97 V;
FD5000019
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Adjustment (Mechanical): NO; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR; Maximum Fall Time: 5 ns;
FD5000023
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Adjustment (Mechanical): NO; Output Load: 15 pF; Maximum Fall Time: 5 ns;
FD5000031
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V; Maximum Fall Time: 5 ns;
FD5000032
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Adjustment (Mechanical): NO; Package Equivalence Code: DILCC4,.12; Output Load: 15 pF;
FD5000033
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: 5 ms; Maximum Symmetry (%): 55/45;
FD5000034
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: 5 ms; Package Body Material: CERAMIC;
FD5000037
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V; Minimum Operating Temperature: -20 Cel;
FD5000040
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: 5 ns; Qualification: Not Qualified;
FD5000041Q
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Adjustment (Mechanical): NO; Physical Dimension: 5.0mm x 3.2mm x 1.3mm; Maximum Supply Voltage: 3.63 V;
FD5000042
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR;
FD5000045
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: 5 ns; Nominal Supply Voltage: 3.3 V;
FD5000051
FD5000051 by Diodes Inc. is a CMOS XO Clock Oscillator with 3.3V nominal voltage, 50MHz operating frequency, and 15pF output load. It has a compact size of 5.0mm x 3.2mm x 1.3mm and is ideal for applications requiring precise timing such as telecommunications equipment and networking devices.
FD5000057
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V; Maximum Rise Time: 5 ms;
FD5000060
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; TR;
FD5000067
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V; Nominal Supply Voltage: 3.3 V;
FD5000068
Pericom Semiconductor
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: 5 ms;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved