Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Switching Regulator or Controllers; Temperature Grade: COMMERCIAL; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$6.200
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
$6.076
Switching Regulators & Controllers AP2002SL attributes and parameters. Explore more Switching Regulators & Controllers devices from Diodes Incorporated
Control Mode:
JESD-30 Code:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Sub-Category:
Surface Mount:
Maximum Switching Frequency:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
AP2002SL Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
General Instrument
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
BAV99-7-F
Multicomp Pro
LTC3646IDE#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2678SX-ADJ/NOPB
Texas Instruments
LM2678SX-ADJ/NOPB by Texas Instruments is a switching regulator with 7 terminals, operating temperature range of -40 to 125°C, and output voltage ranging from 1.23V to 37V. It is used in automotive applications for regulating voltage efficiently up to 5A with a max input voltage of 40V and PWM control technique at a frequency of up to 260kHz.
LM22680MRX-ADJ/NOPB
National Semiconductor
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Switching Frequency: 600 kHz;
LM2674MX-5.0/NOPB
LM2674MX-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output current of 0.5A, nominal output voltage of 5V, and supports buck configuration. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and DMOS technology with PWM control technique at a max frequency of 260kHz.
TPS54260DGQR
TPS54260DGQR by Texas Instruments is a switching regulator with a max output current of 2.5A and a max output voltage of 58V, suitable for automotive applications. It operates in pulse width modulation control mode, with a min operating temperature of -40°C and a max operating temperature of 125°C. The package style is small outline, heat sink/slug, thin profile, shrink pitch, making it ideal for space-constrained designs.
TPS63030DSKR
TPS63030DSKR by Texas Instruments is a switching regulator with a max output voltage of 5.5V and max output current of 0.4A, suitable for automotive applications. It operates b/w -40 to 125°C, with a control mode of current-mode PWM and a compact square package style measuring 2.5mm x 2.5mm x 0.8mm.
TPS54160ADRCT
TPS54160ADRCT by Texas Instruments is a switching regulator with a max output current of 1.5A, operating temperature range of -40 to 125°C, and PWM control mode. Ideal for automotive applications due to its compact size, high efficiency, and wide input voltage range from 3.5V to 60V.
TPS54560BQDDARQ1
TPS54560BQDDARQ1 by Texas Instruments is a switching regulator with 5A output current, 2500 kHz max switching frequency, and -40 to 125°C operating temp. Ideal for automotive applications due to its low profile design, it operates in buck configuration with a control mode of current-mode PWM.
LMZ14202TZ-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Peak Reflow Temperature (C): 245; Moisture Sensitivity Level (MSL): 3; Terminal Position: SINGLE;
LMZ14203HTZE/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Terminal Position: SINGLE; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
LMZM23600SILT
LMZM23600SILT by Texas Instruments is a switching regulator with 10 terminals, operating temperature range of -40 to 125°C, and output voltage up to 15V. Ideal for automotive applications, it features pulse width modulation control mode and buck-boost switcher configuration. With a compact rectangular package style, it is surface mountable and suitable for various microelectronic assemblies.
TPS5410D
TPS5410D by Texas Instruments is a switching regulator with a max output current of 1A and a max input voltage of 36V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
L5972D013TR
STMicroelectronics L5972D013TR is a MOS switching regulator with 3A output current, 280kHz max switching frequency, and voltage-mode control. Ideal for automotive applications, it operates b/w -40 to 125°C with input voltage range of 4.4-36V in a small outline package.
LMZ10500SILT
LMZ10500SILT by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 125°C, and output current up to 0.65A. Ideal for automotive applications, it features a buck switcher configuration and pulse width modulation control mode for efficient power management in compact designs.
LM2576T-ADJ
Motorola
SWITCHING REGULATOR; No. of Terminals: 5; Package Code: TO-220; Package Shape: RECTANGULAR; Surface Mount: NO; Switcher Config: BUCK;
TPS62170DSGT
TPS62170DSGT by Texas Instruments is a switching regulator with a nominal input voltage of 12V and max output current of 0.5A. Operating in hysteric current mode, it has a max switching frequency of 2250 kHz and is ideal for industrial applications requiring efficient power management in compact spaces.
LM3478MM/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
TPS61222DCKT
TPS61222DCKT by Texas Instruments is a switching regulator with max output current of 0.4A and max operating temp of 85°C. Ideal for battery charge control applications, it operates in hysteric current mode with boost switcher config and has a small outline package style.
LM5145QRGYRQ1
Texas Instruments LM5145QRGYRQ1 is a 20-terminal switching controller with voltage-mode control, operating b/w -40 to 150°C. It features a buck switcher configuration, supporting input voltages from 5.5V to 75V and output voltages ranging from 0.8V to 60V. Ideal for automotive applications due to AEC-Q100 screening level and compact chip carrier package style.
LM22672MRE-ADJ/NOPB
LM22672MRE-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a max output voltage of 37V. It operates in an automotive temperature grade range from -40°C to 125°C, making it suitable for various automotive applications requiring efficient power management. With a compact package style and low profile design, this IC offers precise control through pulse width modulation technique at a high switching frequency of up to 1000 kHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AP2004NA
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
AP2001TSA
DUAL SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AP2001SA
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AP2002SLA
AP2001TSLA
AP2001SL-U
DUAL SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AP2004NL
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
AP2001NL
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
AP2001TSL
AP2001SL
AP2002S
AP2001SLA
AP2004N
AP2001S
AP2001TS
AP2001N
AP2001NL-U
DUAL SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
AP2001SL-13
AP2002SA
Anachip
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved