Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 5; Package Code: LSOF; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Northwest PG Solutions
1+ parts
$2.439
100+ parts
1k+ parts
10k+ parts
Native Components
$2.150
Switching Regulators & Controllers AP1602BY attributes and parameters. Explore more Switching Regulators & Controllers devices from Diodes Incorporated
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
AP1602BY Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
LM2576T-ADJ
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-220; Package Shape: RECTANGULAR; Surface Mount: NO;
LM5145RGYR
LM5145RGYR by Texas Instruments is a voltage-mode switching controller with a max output voltage of 60V and max output current of 30A. With a control technique of pulse width modulation, it operates in automotive applications at temperatures ranging from -40 to 125°C. This chip carrier package with matte tin finish is ideal for buck converter configurations in various electronic systems.
LM46001PWPT
LM46001PWPT by Texas Instruments is a switching regulator with 1A output current, 28V max output voltage, and 2200kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design.
TPS560430XFDBVT
TPS560430XFDBVT by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 24V and current of 0.6A, suitable for automotive applications due to its compact size (2.9mm x 1.6mm) and pulse width modulation control technique at a high switching frequency of 2100kHz.
TPS40210DGQR
TPS40210DGQR by Texas Instruments is a switching regulator with 10 terminals, operating temperature range of -40 to 125°C, and output current up to 0.4A. It is ideal for automotive applications due to its compact size (3x3mm), pulse width modulation control technique, and buck-boost switcher configuration.
TPS62177DQCT
TPS62177DQCT by Texas Instruments is a switching regulator with a nominal input voltage of 12V and output voltage of 3.3V, suitable for industrial applications. It operates in buck configuration with a max output current of 0.5A and a max switching frequency of 1000kHz, making it ideal for compact designs requiring efficient power management.
LM5122MHE/NOPB
LM5122MHE/NOPB by Texas Instruments is a switching controller with a current-mode control technique. It operates in a wide temperature range from -40 to 125°C and supports input voltages ranging from 3V to 65V. With a max output voltage of 100V and a compact package style, it is ideal for automotive applications requiring high efficiency and precise voltage regulation.
LMZ34002RKGT
LMZ34002RKGT by Texas Instruments is a voltage-mode switching regulator with a max output current of 2A and a max switching frequency of 900kHz. It operates in industrial temperature grade range (-40 to 85°C) and is suitable for applications requiring a compact rectangular package with surface mount capability.
LM2594HVM-5.0
LM2594HVM-5.0 by Texas Instruments is a switching regulator with VOLTAGE-MODE control, offering a 5V output voltage and 0.5A max current. Ideal for automotive applications, it operates b/w -40 to 125°C, with a wide input range of 4.5V to 60V and compact dimensions of 4.9mm x 3.9mm x 1.75mm in a small outline package.
TPS62111RSAT
TPS62111RSAT by Texas Instruments is a voltage-mode switching regulator with a max output current of 1.5A and a max switching frequency of 1100kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring stable power supply solutions. The chip carrier package style with very thin profile and surface mount capability enhances its versatility in compact electronic designs.
FAN2002MPX
Fairchild Semiconductor
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LM2675M-3.3/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2664M6X/NOPB
LM2664M6X/NOPB by Texas Instruments is a switching regulator with 5V nominal input voltage, -5.5V output voltage, and 80 kHz max switching frequency. It is ideal for industrial applications requiring low profile components in a small outline package.
LM2675N-5.0/NOPB
LM2675N-5.0/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It has a max output voltage of 37V and can handle up to 1A output current. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
TPS552882QWRPMRQ1
TPS552882QWRPMRQ1 by Texas Instruments is a 26-terminal switching regulator with a 12V nominal input/output voltage, operating b/w -40 to 150°C. It utilizes current-mode control and pulse width modulation technique for buck-boost configuration, supporting up to 6.35A output current at a max frequency of 2200 kHz. Ideal for automotive applications due to AEC-Q100 screening level and compact chip carrier package style.
LM2676SX-5.0/NOPB
LM2676SX-5.0/NOPB by Texas Instruments is a switching regulator with a max output current of 5.4A and voltage range from 1.23V to 37V, ideal for automotive applications due to its temp grade and MSL level. It operates in voltage-mode control with PWM technique, offering a compact package style suitable for surface mount designs at up to 260kHz switching frequency.
LMR14006YDDCR
LMR14006YDDCR by Texas Instruments is a switching regulator with a max output voltage of 30V and max output current of 0.6A, suitable for automotive applications. Operating temperature ranges from -40 to 125°C, making it ideal for various environments. Control mode is current-mode with pulse width modulation technique for efficient power management.
LMR23625CDDA
LMR23625CDDA by Texas Instruments is a switching regulator with 2.5A output current, 1V min output voltage, and 30V max output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design with small outline package style.
LM5164DDAR
LM5164DDAR by Texas Instruments is a switching regulator with 1A output current, 90V max output voltage, and 1000kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and compact design. Suitable for various power management tasks in automotive electronics systems.
LM2678S-ADJ/NOPB
LM2678S-ADJ/NOPB by Texas Instruments is a switching regulator with 7 terminals, operating temperature range of -40 to 125°C, and output voltage ranging from 1.23V to 37V. It is ideal for automotive applications due to its small outline package style and pulse width modulation control technique at a max output current of 5A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AP1609SG-13
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AP1604AWL-7
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AP1603WG-7
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AP1602BYL
AP1601M8G-13
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
AP1601M10A
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 10; Package Code: LSSOP; Package Shape: SQUARE; Surface Mount: YES;
AP1602BYLA
AP1601M10L
AP1601M8L
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 8; Package Code: LSSOP; Package Shape: SQUARE; Surface Mount: YES;
AP1601M8LA
AP1602AYLA
AP1601M8A
AP1602BYA
AP1601M10G-U
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
AP1601M10LA
AP1602AY
AP1602AYA
AP1601M8G-U
AP1601M10
Integrated Circuit Technology
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Code: LSOF; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved