Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Cyclops Electronics Ltd
Bristol Electronics
Atlantic Semiconductor
AZTECH Wire
$15.630
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Northwest PG Solutions
Assy Fe
Native Components
Perfect Parts
Robosynatics
$5.501
$5.094
Lucentia Tech
Kepictronics
Switching Regulators & Controllers AP1506-50K5L-13 attributes and parameters. Explore more Switching Regulators & Controllers devices from Diodes Incorporated
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
AP1506-50K5L-13 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 17/Apr/2012
PCN Design/Specification - Mold Compound/Die Update 30/Apr/2009
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
Weitronic Enterprise
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
BAV99WT1G
Fairchild Semiconductor
Weitron Technology
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
LMZ10500SILT
LMZ10500SILT by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 125°C, and output current up to 0.65A. Ideal for automotive applications, it features a buck switcher configuration and pulse width modulation control mode for efficient power management in compact designs.
LM3488MMX/NOPB
LM3488MMX/NOPB by Texas Instruments is a switching controller with current-mode control, operating at -40 to 125°C. It offers a max output voltage of 500V and max output current of 1A. Ideal for automotive applications, this IC features pulse width modulation and buck-boost switcher configuration.
LM2575T-3.3G
LM2575T-3.3G by Onsemi is a BIPOLAR SWITCHING REGULATOR with 3.2A output current, 63kHz switching frequency, and VOLTAGE-MODE control mode. Ideal for automotive applications due to its AUTOMOTIVE temperature grade, it operates b/w -40°C to 125°C efficiently regulating voltage from 4.75V to 40V down to a stable 3.3V output.
LMZ31710RVQR
LMZ31710RVQR by Texas Instruments is a current-mode switching regulator with max output voltage of 5.5V and max output current of 10A. Ideal for industrial applications, it operates b/w -40 to 85°C, making it suitable for various electronic devices requiring efficient power management in compact spaces.
LT1933ES6#TRMPBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMR51420XDDCR
LMR51420XDDCR by Texas Instruments is a switching regulator with 2A output current, 1100kHz max switching frequency, and 34.2V max output voltage. Ideal for applications requiring efficient power conversion in compact spaces due to its small outline and thin profile package style.
TPS63000DRCR
TPS63000DRCR by Texas Instruments is a switching regulator with max output voltage of 5.5V, max output current of 2A, and max operating temp of 85°C. Ideal for industrial applications requiring efficient power conversion in a compact form factor.
LM2672M-5.0/NOPB
LM2672M-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 5V nominal output voltage, and 400kHz max switching frequency. It is ideal for automotive applications due to its small outline package style and wide operating temperature range (-40°C to 125°C).
MC34063ADRJR
MC34063ADRJR by Texas Instruments is a switching regulator with 5V nominal input voltage, 1.25V min output voltage, and 1.5A max output current. It operates in voltage-mode control technique for various applications requiring efficient power conversion in a compact form factor. The IC features a small outline package with surface mount capability and is suitable for commercial temperature grade environments.
LM2674MX-5.0/NOPB
LM2674MX-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output current of 0.5A, nominal output voltage of 5V, and supports buck configuration. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and DMOS technology with PWM control technique at a max frequency of 260kHz.
LM2596S-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2676S-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Seated Height: 4.89 mm;
LM3150MH/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMZ10501SEX/NOPB
LMZ10501SEX/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a max switching frequency of 2250 kHz. This small outline package with 8 terminals is ideal for applications requiring high efficiency power conversion in compact spaces.
LM2678S-3.3/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
MC33063AD
Shenzhen Changyuntong Ic Design
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM25011AQ1MY/NOPB
LM25011AQ1MY/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage, 2A max output current, and 2000 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and small outline package style.
LM2672M-ADJ
LM2672M-ADJ by Texas Instruments is a voltage-mode switching regulator with 1A output current, 1.23V min and 37V max output voltage. Ideal for automotive applications, it operates b/w -40°C to 125°C temperature range and supports pulse width modulation control technique.
LM76003RNPT
LM76003RNPT by Texas Instruments is a switching regulator with 30 terminals, operating temperature range of -40 to 125°C, and output voltage up to 57V. Ideal for automotive applications, it features a current-mode control technique, pulse frequency modulation, and a max output current of 3.5A.
LM2596SX-ADJ/NOPB
LM2596SX-ADJ/NOPB by Texas Instruments is a 5-terminal switching regulator with VOLTAGE-MODE control. It operates b/w -40 to 125°C, offering an output range of 3.3V to 37V at a max current of 3A. Ideal for automotive applications due to its compact size and high efficiency at a max switching frequency of 173 kHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AP1509-50SG-13
Diodes Incorporated
Diodes Inc. AP1509-50SG-13 is a small outline switching regulator with 8 terminals, operating b/w -20°C to 85°C. It has a max output current of 2A, nominal input voltage of 12V, and supports pulse width modulation control technique. Ideal for applications requiring efficient voltage-mode buck switching regulators with a wide input voltage range up to 22V.
AP1501-T5G-U
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-XSFM-T5;
AP1501A-50K5G-13
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AP1513SG-13
AP1513SG-13 by Diodes Inc. is a voltage-mode switching regulator with 2A output current, 400kHz max switching frequency, and 85°C max operating temp. Ideal for applications requiring efficient power conversion in compact spaces like consumer electronics and industrial controls.
AP1507-12D5L-13
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-252; Package Shape: RECTANGULAR; Surface Mount: YES;
AP1501-50K5G-13
AP1501-50K5G-13 by Diodes Incorporated is a switching regulator with a max output current of 6.5A and a max input voltage of 40V. It is commonly used in applications requiring voltage regulation, such as power supplies and battery chargers.
AP1509-SG-13
AP1509-SG-13 by Diodes Inc. is a switching regulator with 2A output current, 173kHz max switching frequency, and voltage-mode control. Ideal for applications requiring efficient power conversion in a compact design, this IC operates b/w -20°C to 85°C and supports input voltages from 4.5V to 22V.
AP1507-33D5L-13
AP1507-D5L-13
AP1501A-50K5G-U
AP1501A-50K5G-U by Diodes Inc. is a switching regulator with a max output current of 7.5 A and a max input voltage of 40 V. It operates using pulse width modulation control technique and is commonly used in applications requiring voltage regulation, such as power supplies and battery chargers.
AP1501A-K5G-13
AP1501-K5G-13
AP1501-12T5R
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
AP1501-12K5L-U
AP1501-12T5RA
AP1501-12T5RG-13
Switching Regulator or Controllers;
AP1501-12K5G-U
AP1501-12T5
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Finish: TIN LEAD;
AP1501-12T5RG-U
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
AP1501-12T5RL
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved