Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DUAL COLOR LED ARRAY; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag); JESD-609 Code: e4;
Median Price
$2.350
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
VNN
Vyrian
Semicontronic
$0.100
$0.098
$0.097
Corohmni
$0.509
Aztec Data Supply Inc.
$0.600
Argo Parts USA
Netroflash
$2.232
$2.185
Continental Prestige Electronics
$2.303
Ampacity Inc.
$5.100
AZTECH Wire
$15.010
$14.420
$14.130
$13.840
Visible LEDs 5640710111F attributes and parameters. Explore more Visible LEDs devices from Dialight
JESD-609 Code:
Optoelectronic Type:
Terminal Finish:
5640710111F Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Dialight is the world leader in LED industrial lighting technology with millions of LED fixtures installed worldwide. Our story began in 1938 in Brooklyn, NY, where we produced instrument panel lights for aircraft. In 1971, just one year after the introduction of the LED, we launched our first LED product. Since then, we have revolutionized the use of LEDs and ONLY LEDs, to provide superior lighting for traffic control, indicators, structural towers and industrial work sites around the world. We see a world where heavy industry is transformed to be safer, more productive, and environmentally friendly through illumination. We enable industrial customers operating in demanding environments to reduce their energy costs, maintenance costs, and carbon footprint while maximizing the safety and productivity of their facilities. From our signature High Bay line to our versatile Linear fixtures, Dialight offers the largest selection of rugged, cutting edge products to suit virtually any industrial application. With over 50 years of industrial LED lighting experience and the largest installed base in the world, we are here to help you identify a lighting solution that meets your specific needs.
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
Swampscott Electronics
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Telcom Semiconductor
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
HLMP-3301-F00B2
Broadcom
HLMP-3301-F00B2 by Broadcom is a 5mm single color LED with peak wavelength of 635nm. With a max forward current of 0.03A, it's ideal for applications requiring high efficiency red light emission and has a viewing angle of 60°. Perfect for radial mounting in various electronic devices.
150044M155260
Wuerth Elektronik & Kg
Visible LEDs;
APT1608SURCK
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Maximum Forward Current: .03 A;
597-3111-407F
Dialight
Dialight's 597-3111-407F is a 2mm red LED with max forward current of 0.03A, peak wavelength of 660nm, and viewing angle of 70°. Ideal for surface mount applications in electronics due to its compact size and water-clear lens providing bright illumination.
APT2012SRCPRV
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 660;
HLMP-1700
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.1; Lens Type: TINTED DIFFUSED; Terminal Finish: MATTE TIN;
APT1608SRCPRV
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Terminal Pitch: 1.65 mm;
XHP35B-H0-0000-0D0UB440G
Wolfspeed
SINGLE COLOR LED;
LTST-C191KGKT-5A
Lite-on Technology
LTST-C191KGKT-5A by Lite-on Technology is a 1.1mm GREEN SINGLE COLOR LED with a peak wavelength of 574nm and a viewing angle of 130°. It is ideal for surface mount applications requiring a max forward current of 0.03A and an operating temperature range from -55 to 85 °C.
HLMP-3507-EF000
HLMP-3507-EF000 by Broadcom is a 5mm SINGLE COLOR LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high performance green light emission in bulk packaging.
HSMH-C170
Hewlett Packard
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17; Lens Type: DIFFUSED; Maximum Forward Current: .025 A;
XHP50B-00-0000-0D0UH20E3
Cree Led
553-0221F
Dialight 553-0221F is a dual color LED array with separate configuration, 3mm size, and 2 elements. It has peak wavelengths of 650nm (red) and 563nm (green), ideal for status indicators in electronics due to its high luminous intensity of 10/16mcd. With a max forward current of 0.007A and voltage of 3V, it operates b/w -55°C to 100°C temperature range.
HSMQ-C190
HSMQ-C190 by Broadcom is a 1mm single color LED with peak wavelength of 520nm. With a viewing angle of 140° and luminous intensity of 145.0mcd, it's ideal for surface mount applications requiring green light emission at temperatures ranging from -40 to 85°C.
HSMY-C170
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.0; Lens Type: DIFFUSED; Terminal Finish: Gold (Au);
HLMP-3962
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Shape: ROUND; Size: 5 mm; T-code: T-1 3/4;
SML-LXR851SISGC-TR
Lumex
SML-LXR851SISGC-TR by Lumex is a 2mm dual color LED with a common anode configuration. It has a peak wavelength of 632/570nm and a max forward current of 0.025A. This LED is suitable for surface mount applications and has a viewing angle of 120°.
597-3111-502F
Dialight's 597-3111-502F is a single color LED with peak wavelength of 660nm. It has a max forward current of 0.03A and forward voltage of 2.5V, making it ideal for applications requiring bright red light emission in compact spaces like surface mount PCBs.
TLHG4400
Vishay Intertechnology
TLHG4400 by Vishay Intertechnology is a 3mm single color LED with a peak wavelength of 605nm. It has a max forward current of 0.03A and a viewing angle of 60°. This LED is commonly used in applications such as indicator lights and displays.
LSQ976-Z
Osram Opto Semiconductors
LSQ976-Z by Osram Opto Semiconductors is a 1mm single color LED with peak wavelength of 645nm. It has a max forward current of 0.025A and viewing angle of 160°. Ideal for applications requiring super red light emission in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
564-0200-222F
Dialight's 564-0200-222F is a 3mm single color LED array with separate, 3-element configuration. It has a peak wavelength of 565nm and max forward current of 0.007A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
564-0100-111F
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 6; Nominal Luminous Intensity (mcd): 10.0; Lens Type: DIFFUSED; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag);
564-0100-132F
TRIPLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 6; Nominal Luminous Intensity (mcd): 10.0/10.0/12.6; Lens Type: DIFFUSED; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag);
564-0100-222F
Dialight's 564-0100-222F is a 3mm green LED array with separate, 3-element configuration. It has a peak wavelength of 565nm and max forward current of 0.03A. Ideal for applications requiring a single color LED array with diffused lens, such as indicator lights in electronic devices.
564-0100-132
TRIPLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 6; Nominal Luminous Intensity (mcd): 10.0/10.0/12.6; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0;
564-0700-444F
DUAL COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 6; Nominal Luminous Intensity (mcd): 4.3/6.3; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag); Height: 15.24 mm;
564-0200-221
DUAL COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 6; Nominal Luminous Intensity (mcd): 1.8/1.6; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
564-0700-100F
564-0700-440F
5640710444F
564-0700-101F
DUAL COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag); No. of Functions: 2;
564-0700-110F
564-0700-441F
5640700820F
5640740114F
TRIPLE COLOR LED ARRAY; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag); JESD-609 Code: e4;
56407404444F
56407401114F
564-0700-111F
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 6; Nominal Luminous Intensity (mcd): 4.7/10.0; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag); Peak Wavelength (nm): 635/565;
564-0740-111F
DUAL COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 6; Nominal Luminous Intensity (mcd): 4.7/10.0; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag); Viewing Angle: 60 deg;
564-0740-444F
DUAL COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 6; Nominal Luminous Intensity (mcd): 4.3/6.3; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag); Size: 3 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved