Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Dialight's 558-0803-023F is a single blue LED with 0.03A max forward current, peak wavelength of 468nm, and 57.0mcd luminous intensity. Ideal for panel mount applications due to diffused lens type and 100° viewing angle. Operating temp range from -40°C to 100°C makes it versatile for various lighting needs.
Median Price
$1.470
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Newark
1+ parts
$0.319
100+ parts
1k+ parts
10k+ parts
-
PEI Genesis
$1.210
$0.950
Powell Electronics
$1.240
DigiKey
$2.810
$1.578
$1.310
$1.194
Mouser Electronics
$1.460
$1.250
$1.190
Element14
$2.847
$1.379
$1.133
$1.051
Verical
$1.546
Master Electronics
$1.251
$1.095
$0.939
Farnell
$1.441
Nova Conductors
$1.040
Vyrian
VNN
Electro Sonic
$1.261
$1.092
$0.994
IBS Electronics
$2.202
$1.755
$1.617
Lakeview Electronics
Ampacity Inc.
$0.271
Netroflash
$1.019
Perfect Parts
Continental Prestige Electronics
$1.100
Single configuration ensures easy integration and simplified circuit design.
Low forward current consumption for energy efficiency.
Peak wavelength of 468nm provides a bright blue color output.
Diffused lens type helps in uniform light distribution and reduces glare.
Two terminals for easy connection and installation.
High maximum operating temperature tolerance ensures reliability in various environments.
Compact height allows for versatile placement in different applications.
Round shape provides a wide viewing angle and aesthetic appeal.
Wide operating temperature range ensures functionality in extreme conditions.
Bright blue color for vibrant visual appeal.
Bulk packaging offers cost-effective solution for bulk orders.
Wide viewing angle of 100° for improved visibility.
High luminous intensity of 57.0 mcd for bright output.
Panel mounting feature for easy installation in various panels and enclosures.
Visible LEDs 558-0803-023F attributes and parameters. Explore more Visible LEDs devices from Dialight
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Viewing Angle:
558-0803-023F Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Dialight is the world leader in LED industrial lighting technology with millions of LED fixtures installed worldwide. Our story began in 1938 in Brooklyn, NY, where we produced instrument panel lights for aircraft. In 1971, just one year after the introduction of the LED, we launched our first LED product. Since then, we have revolutionized the use of LEDs and ONLY LEDs, to provide superior lighting for traffic control, indicators, structural towers and industrial work sites around the world. We see a world where heavy industry is transformed to be safer, more productive, and environmentally friendly through illumination. We enable industrial customers operating in demanding environments to reduce their energy costs, maintenance costs, and carbon footprint while maximizing the safety and productivity of their facilities. From our signature High Bay line to our versatile Linear fixtures, Dialight offers the largest selection of rugged, cutting edge products to suit virtually any industrial application. With over 50 years of industrial LED lighting experience and the largest installed base in the world, we are here to help you identify a lighting solution that meets your specific needs.
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
1N4148W-T
Rectron
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
Siemens
Laube Technology
Fairchild Semiconductor
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
SLR-56YY3F
ROHM
ROHM's SLR-56YY3F is a 5mm SINGLE COLOR LED with peak wavelength of 585nm. With max forward current of 0.02A, it offers yellow light at 10.0mcd luminous intensity. Ideal for applications requiring diffused yellow light emission in a compact form factor.
LTST-C170TBKT-5A
Lite-on Technology
LTST-C170TBKT-5A by Lite-on Technology is a 1.4mm BLUE LED with a peak wavelength of 468nm and viewing angle of 130°. Ideal for surface mount applications, it has a max forward current of 0.02A and nominal luminous intensity of 28.1mcd, making it suitable for various lighting projects.
HLMP-1790-101F
Dialight
The Dialight HLMP-1790-101F is a 3mm GREEN LED with peak wavelength of 565nm. It has a max forward current of 0.007A and viewing angle of 50deg. Ideal for applications requiring single color LEDs in radial mount configuration.
LTST-C190KRKT
LTST-C190KRKT by Lite-on Technology is a single color LED with peak wavelength of 639nm. It has a max forward current of 0.025A and viewing angle of 260°, making it ideal for surface mount applications in various electronic devices. With a water clear lens type and red color, this LED operates b/w -30°C to 85°C temperature range.
KPT-1608EC
Kingbright Electronic
KPT-1608EC by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with peak wavelength of 627nm and 15.0mcd luminous intensity. Ideal for high efficiency red lighting applications, it operates b/w -40 to 85°C temperatures and has a water clear lens for a viewing angle of 120°.
551-0207F
Dialight's 551-0207F is a 3mm SINGLE COLOR LED with peak wavelength of 563nm, forward current of 0.06A, and forward voltage of 3V. Ideal for applications requiring GREEN light emission with TINTED DIFFUSED lens, such as indicator lights in electronics.
150141GS73100
Wuerth Elektronik & Kg
150141GS73100 by Wurth Elektronik is a single color LED with a peak wavelength of 515nm and max forward current of 0.03A. With water clear lens, it has a viewing angle of 120° and nominal luminous intensity of 1000mcd. Ideal for surface mount applications in electronics for its compact size (2.4mm) and green light emission.
SML-LX0603USBW-TR
Lumex
The Lumex SML-LX0603USBW-TR is a 1mm single color LED with peak wavelength of 470nm. It has a max forward current of 0.025A and viewing angle of 140°. Ideal for surface mount applications, this ultra super blue LED operates b/w -25 to 85 °C, making it suitable for various lighting projects.
598-8281-107F
Dialight's 598-8281-107F is a 2mm single color LED with max forward current of 0.025A. With water clear lens and green color, it has viewing angle of 140°. Ideal for surface mount applications, operating temp range from -30 to 85 °C.
HLMP1790
Vch
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Viewing Angle: 50 deg; Minimum Operating Temperature: -55 Cel;
ASMB-KTF0-0A306
Broadcom
Broadcom's ASMB-KTF0-0A306 is a COMMON ANODE, 3 ELEMENTS TRIPLE COLOR LED with peak wavelengths of 628/518/467nm. It has a max forward current of 0.02A and nominal luminous intensities of 490.0/1100.0/215.0mcd, suitable for applications requiring RGB illumination in compact spaces like electronic displays or indicator lights.
HLMP-4740
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3; Lens Type: GREEN DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SML-P11MTT86
ROHM SML-P11MTT86 is a 0.6mm SINGLE COLOR LED with max. forward current of 0.02A, emitting YELLOW GREEN light at 2.1mcd intensity. Ideal for surface mount applications in electronics due to its small size and color clarity.
LTST-C150KRKT
LTST-C150KRKT by Lite-on Technology is a single color LED with peak wavelength of 639nm and max forward current of 0.03A. Ideal for applications requiring a red/orange light source, this surface mount LED has a viewing angle of 130° and min luminous intensity of 130cd.
OVSA1SBC2R8
Tt Electronics Plc
OVSA1SBC2R8 by Tt Electronics Plc is a WATER CLEAR SINGLE COLOR LED with 0.07A max forward current, 120° viewing angle, and 1600.0 mcd luminous intensity. Ideal for surface mount applications in environments ranging from -40 to 100 °C, this ROUND LED in RED color is commonly used in electronic displays and indicators.
MLCAWT-H1-0000-000XE1
Cree Led
SINGLE COLOR LED; Maximum Forward Voltage: 3.4 V; Height: 1.2 mm; Maximum Reverse Voltage: 5 V; Minimum Luminous Intensity: 120 cd; Maximum Forward Current: .35 A;
598-8510-207F
Dialight's 598-8510-207F is a 2mm dual-color LED with water-clear lens. It has max forward current of 0.02A, operating temp range -40 to 100°C, and viewing angle of 160°. Ideal for surface mount applications requiring red/green light indication in compact spaces.
551-1307F
Dialight's 551-1307F is a 3mm single color LED with peak wavelength of 565nm, forward current of 0.007A, and forward voltage of 3V. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
598-8621-207F
Dialight's 598-8621-207F is a dual-color LED with water-clear lens, featuring separate configuration and 2.7mm size. With max forward current of 0.02A, it emits red-orange/green light at 3.5V for applications like indicator lights in electronics due to its compact size and surface mounting feature.
MLCAWT-H1-0000-000XE3
SINGLE COLOR LED; Maximum Forward Voltage: 3.4 V; Maximum Reverse Voltage: 5 V; Maximum Operating Temperature: 150 Cel; Maximum Forward Current: .35 A; Color At Wavelength: White;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
558-0101-007F
SINGLE COLOR LED; Mounting Feature: PANEL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
558-0302-007F
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.6; Lens Type: DIFFUSED; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag);
558-0202-001F
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.0; Lens Type: DIFFUSED; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag);
558-0201-007F
SINGLE COLOR LED; Mounting Feature: PANEL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 16.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
558-0701-007
Dialight's 558-0701-007 is a 3mm red LED with a peak wavelength of 660nm and a max forward current of 0.04A. It is commonly used for panel mount applications due to its round shape and bulk packing method.
558-0803-001F
Dialight's 558-0803-001F is a single blue LED with peak wavelength of 465nm. It has max forward current of 0.02A and viewing angle of 70°. Ideal for panel mount applications, this LED operates b/w -25 to 85 °C temperatures.
558-0803-003F
The Dialight 558-0803-003F is a single color LED with a peak wavelength of 465nm and a max forward current of 0.02A. It is commonly used for panel mount applications due to its diffused lens type and round shape.
558-0803-007F
SINGLE COLOR LED; Mounting Feature: PANEL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 13.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Silver/Nickel (Sn/Ag/Ni);
558-0803-027F
SINGLE COLOR LED; Mounting Feature: PANEL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 57.0; Lens Type: DIFFUSED; Viewing Angle: 100 deg;
558-0101-023F
SINGLE COLOR LED; Mounting Feature: PANEL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.7; Lens Type: DIFFUSED; No. of Functions: 1;
558-0101-027F
SINGLE COLOR LED; Mounting Feature: PANEL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.7; Lens Type: DIFFUSED; Configuration: SINGLE;
558-0201-023F
SINGLE COLOR LED; Mounting Feature: PANEL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.6; Lens Type: DIFFUSED; Minimum Operating Temperature: -25 Cel;
558-0201-027F
SINGLE COLOR LED; Mounting Feature: PANEL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.6; Lens Type: DIFFUSED; Viewing Angle: 60 deg;
558-0501-021F
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 70.0; Lens Type: NONTINTED/NONDIFFUSED; Configuration: SINGLE;
558-0501-023F
SINGLE COLOR LED; Mounting Feature: PANEL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 70.0; Lens Type: NONTINTED/NONDIFFUSED; Shape: ROUND;
558-0501-027F
SINGLE COLOR LED; Mounting Feature: PANEL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 70.0; Lens Type: NONTINTED/NONDIFFUSED; Configuration: SINGLE;
558-0601-023F
SINGLE COLOR LED; Mounting Feature: PANEL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 200.0; Lens Type: NONTINTED/NONDIFFUSED; Minimum Operating Temperature: -40 Cel;
558-0601-027F
SINGLE COLOR LED; Mounting Feature: PANEL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 200.0; Lens Type: NONTINTED/NONDIFFUSED; Peak Wavelength (nm): 592;
558-0803-021F
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 57.0; Lens Type: DIFFUSED; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved