Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
M85528/2-22-A-01-A by Defense Logistics Agency features Shell Sizes 21, 22, MIL Conformity, and Material: ALUMINUM, STAINLESS STEEL. It is used with MIL-C-5015, MIL-C-83723 connectors for military applications requiring durable backshells and connector accessories.
Median Price
$84.875
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$10.812
100+ parts
-
1k+ parts
10k+ parts
Heilind Electronics
$11.893
Powell Electronics
$78.790
TTI
$90.960
$40.220
Mouser Electronics
$149.540
Air Electro
$324.080
$71.510
$51.370
DigiKey
$555.180
$522.530
$512.080
Verical
$33.436
Electro Enterprises
$9.343
$7.786
$7.007
$6.781
FDH Electronics
$13.432
$10.794
$10.074
$9.749
DigiKey Marketplace
$207.600
Vyrian
Nova Conductors
American Connector Supply Corp
Resion
Benchmark Connector Corporation
Bisco
Ampacity Inc.
$8.740
Netroflash
Offers versatility in terms of compatibility with different connectors and applications.
Meets strict military standards for reliability and durability, ensuring high quality performance in demanding environments.
Compliance with multiple military specifications allows for compatibility with a wide range of military equipment and systems.
Specifically designed to work with MIL-spec connectors, ensuring proper fit and function.
The PLATE accessory adds additional functionality and customization options to the connector setup.
The use of high-quality materials like aluminum and stainless steel ensures durability and resistance to harsh environmental conditions.
Mil-Spec Backshells and Connector Accessories M85528/2-22-A-01-A attributes and parameters. Explore more Mil-Spec Backshells and Connector Accessories devices from Defense Logistics Agency
Associated Military - Specifications:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
MIL-Connector Accessory:
MIL-Connector Accessory Name:
Shell Sizes:
As the nation’s combat logistics support agency, the Defense Logistics Agency manages the end-to-end global defense supply chain – from raw materials to end user disposition – for the five military services, 11 combatant commands, other federal, state and local agencies and partner and allied nations. DLA’s mission is to “deliver readiness and lethality to the Warfighter Always and support our nation through quality, proactive global logistics.” To accomplish this mission, DLA has a staff of about 25,000 employees divided into multiple supply chains that contract for material and services across the military classes of supply, to include: subsistence (food/water), clothing and textiles, bulk petroleum and other energy products, construction material and equipment, personal demand items, medical material and equipment, and repair parts for land, sea and air systems.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
M39029/57-357
TE Connectivity's M39029/57-357 is a CRIMP contact type backshell accessory for MIL-DTL-38999 connectors. It features FEMALE contact gender, MIL conformity, and uses M81969/14-02 & M81969/8-05 insertion tools. Ideal for military applications requiring reliable crimp terminal connections.
M85049/88-17W03
Defense Logistics Agency
CONNECTOR ACCESSORY; Backshell Clamping: METAL BAND/STRAP; Associated Military - Specifications: MIL-C-38999; Material: ALUMINUM; DIN Conformity: NO; Manufacturer Series: M85049/88-17W03;
M39029/58364
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Associated Military - Specifications: MIL-DTL-38999; DIN Conformity: NO; Contact Type: CRIMP; MIL-Connector Accessory Name: CONTACT;
D38999/33W17R
Souriau
CONNECTOR ACCESSORY; Contact Gender: FEMALE; MIL Conformity: YES; IEC Conformity: NO; Shell Sizes: 17; Additional Features: STANDARD: MIL-DTL-38999;
M85049/69-13N
Amphenol
CIRCULAR CONN ACCESSORY; IEC Conformity: NO; Material: ALUMINUM ALLOY; MIL Conformity: YES; DIN Conformity: NO; Associated Military - Specifications: MIL-DTL-38999;
MS3181-12CAL
Aero-electric Connector
CONNECTOR ACCESSORY; Material: ALUMINUM ALLOY; IEC Conformity: NO; MIL Conformity: YES; MIL-Connector Accessory Name: PROTECTIVE COVER; Associated Military - Specifications: MIL-DTL-26482;
D38999/28-1F
D38999/28-1F by Defense Logistics Agency is a Mil-Spec backshell with shell size 9, made of aluminum. It conforms to MIL-C-38999 standards and is used as a JAM NUT accessory for MIL connectors like S864.
D38999/33W9N
CONNECTOR ACCESSORY; DIN Conformity: NO; Additional Features: STANDARD: MIL-DTL-38999; MIL Conformity: YES; IEC Conformity: NO; Associated Military - Specifications: MIL-DTL-38999;
M39029/103559
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Removal Tool Sources: MILITARY; IEC Conformity: NO; Insertion Tools: M81969/8-09, M81969/14-04; DIN Conformity: NO;
D38999/33Z19R
Spacecraft Components
CONNECTOR ACCESSORY; Shell Sizes: 19; DIN Conformity: NO; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CAP ITEM;
M39029/76424
Souriau-sunbank Connection Technologies
M39029/76424 by Souriau-sunbank Connection Technologies is a Mil-Spec Backshell with CRIMP REAR RELEASE contact type. It uses M81969/8-07, M81969/14-03 insertion tools and MILITARY removal tool sources. The mating contacts are M39029/78-432, M39029/77-428 with COPPER ALLOY material, ideal for military applications.
D38999/33W13N
CONNECTOR ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Shell Sizes: 13; Associated Military - Specifications: MIL-DTL-38999; Material: ALUMINUM ALLOY;
D38999/33W13R
CONNECTOR ACCESSORY; DIN Conformity: NO; Shell Sizes: 13; National Stock Number (NSN): 5935013068834; MIL-Connector Accessory Name: COVER ITEM; MIL-Connector Accessory: S944;
M39029/75416
M39029/75416 by Souriau-sunbank is a Mil-Spec backshell with CRIMP REAR RELEASE contact type. It uses MIL-C-38999 specs, POWER 12-14 AWG contacts, and COPPER ALLOY material. Ideal for military applications requiring FEMALE connectors with SHIELDED functionality and 1500 cycles durability.
D38999/33W21R
Glenair
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: COVER ITEM; Associated Military - Specifications: MIL-DTL-38999 SERIES III; Shell Sizes: 21; IEC Conformity: NO; DIN Conformity: NO;
D38999/33F23N
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CAP ITEM; MIL Conformity: YES; Material: ALUMINUM ALLOY; Associated Military - Specifications: MIL-DTL-38999; DIN Conformity: NO;
M85049/18-11W03
M85049/18-11W03 by Defense Logistics Agency is a MIL-Spec backshell with shell sizes 11 and B, conforming to MIL-C-38999. It features backshell clamping using bars/straps and is made of aluminum. This accessory is designed for use with MIL-C-38999 connectors in military applications.
CONNECTOR ACCESSORY; DIN Conformity: NO; Additional Features: STANDARD: MIL-DTL-38999; IEC Conformity: NO; Contact Gender: FEMALE; Shell Sizes: 13;
D38999/33W9R
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: COVER ITEM; MIL Conformity: YES; DIN Conformity: NO; Shell Sizes: 9; IEC Conformity: NO;
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: COVER ITEM; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Material: ALUMINUM ALLOY; Shell Sizes: 17;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M85528/2-18A
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: PLATE; Shell Sizes: 17, 18; Associated Military - Specifications: MIL-C-5015, MIL-C-83723, MIL-C-26482, MIL-C-27599, MIL-C-38999; MIL-Connector Accessory: S938B; IEC Conformity: NO;
M85528/2-18-A
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: YES; Shell Sizes: 18; Associated Military - Specifications: MIL-C-85528; MIL-Connector Accessory Name: FLANGE ITEM;
M85528/2-16-A-01
M85528/2-16-A-01 by Defense Logistics Agency is a Mil-Spec backshell with shell sizes 15, 16, 16S, and 27. It conforms to MIL standards and is compatible with MIL-C-5015, MIL-C-83723 connectors. Made of aluminum and stainless steel, it includes the S938B accessory plate for military applications.
M85528/2-18-A-01
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: YES; Shell Sizes: 17, 18; Associated Military - Specifications: MIL-C-5015, MIL-C-83723, MIL-C-26482, MIL-C-27599, MIL-C-38999; MIL-Connector Accessory: S938B;
M85528/2-16A
CONNECTOR ACCESSORY; Shell Sizes: 15, 16, 16S, 27; Material: ALUMINUM, CARBON STEEL; Associated Military - Specifications: MIL-C-5015, MIL-C-83723, MIL-C-26482, MIL-C-27599, MIL-C-38999, MIL-C-81703; MIL-Connector Accessory Name: PLATE; MIL Conformity: YES;
M85528/2-14A
CONNECTOR ACCESSORY; Material: ALUMINUM, CARBON STEEL; MIL-Connector Accessory Name: PLATE; National Stock Number (NSN): 5935012515099; MIL-Connector Accessory: S938B; Associated Military - Specifications: MIL-C-5015, MIL-C-83723, MIL-C-26482, MIL-C-27599, MIL-C-38999, MIL-C-81703;
M85528/2-14-A-01
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: PLATE; MIL-Connector Accessory: S938B; Associated Military - Specifications: MIL-C-5015, MIL-C-83723, MIL-C-26482, MIL-C-27599, MIL-C-38999, MIL-C-81703; Shell Sizes: 13, 14, 14S, 19; Material: ALUMINUM, STAINLESS STEEL;
M85528/2-12-A-01
CONNECTOR ACCESSORY; MIL-Connector Accessory: S938B; MIL-Connector Accessory Name: FLANGE ITEM; Shell Sizes: 12; Material: ALUMINUM ALLOY; IEC Conformity: NO;
M85528/2-12A
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-C-5015, MIL-C-83723, MIL-C-26482, MIL-C-27599, MIL-C-38999, MIL-C-81703; IEC Conformity: NO; MIL-Connector Accessory: S938B; Material: ALUMINUM, CARBON STEEL; National Stock Number (NSN): 5935013342024;
M85528/2-10-A-01
M85528/2-10-A-01 by Defense Logistics Agency is a Mil-Spec backshell with shell sizes 7, 9, 10, and 10S. It conforms to MIL standards like MIL-C-5015 and uses aluminum & stainless steel materials. This connector accessory plate is associated with military specifications MIL-C-83723, MIL-C-26482, MIL-C-27599, MIL-C-38999, and more.
M85528/2-18A01A
CONNECTOR ACCESSORY; DIN Conformity: NO; Associated Military - Specifications: MIL-C-5015, MIL-C-83723, MIL-C-26482, MIL-C-27599, MIL-C-38999; MIL-Connector Accessory: S938B; Material: ALUMINUM, STAINLESS STEEL; IEC Conformity: NO;
M85528/2-18-A-01-A
M85528/2-18-A-01-A by Defense Logistics Agency is a Mil-Spec backshell with shell sizes 17 and 18. It conforms to MIL standards, compatible with MIL-C-5015, MIL-C-83723 connectors. Made of aluminum and stainless steel, it includes the S938B plate accessory for military applications.
M85528/2-22-A-01
CONNECTOR ACCESSORY; Shell Sizes: 21, 22; MIL-Connector Accessory Name: PLATE; Associated Military - Specifications: MIL-C-5015, MIL-C-83723, MIL-C-26482, MIL-C-27599, MIL-C-38999; DIN Conformity: NO; MIL Conformity: YES;
M85528/2-22A
M85528/2-22A by Defense Logistics Agency is a Mil-Spec backshell with shell sizes 21 and 22. It conforms to MIL standards and is compatible with MIL-C-5015, MIL-C-83723, MIL-C-26482 connectors. Made of aluminum and carbon steel, it includes the S938B plate accessory for military applications.
M85528/2-14-A-01-A
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-C-5015, MIL-C-83723, MIL-C-26482, MIL-C-27599, MIL-C-38999, MIL-C-81703; IEC Conformity: NO; MIL-Connector Accessory: S938B; MIL Conformity: YES; Shell Sizes: 13, 14, 14S, 19;
M85528/2-14A01A
CONNECTOR ACCESSORY; DIN Conformity: NO; Shell Sizes: 14A; MIL-Connector Accessory Name: FLANGE ITEM; IEC Conformity: NO; MIL Conformity: YES;
M85528/2-10-A-01-A
CONNECTOR ACCESSORY; MIL-Connector Accessory: S938B; DIN Conformity: NO; MIL-Connector Accessory Name: PLATE; Shell Sizes: 7, 9, 10, 10S; MIL Conformity: YES;
M85528/2-10A01A
CONNECTOR ACCESSORY; MIL Conformity: YES; IEC Conformity: NO; Shell Sizes: 10; MIL-Connector Accessory Name: MOUNTING FLANGE; DIN Conformity: NO;
M85528/2-20-A
CONNECTOR ACCESSORY; Material: ALUMINUM ALLOY; DIN Conformity: NO; Shell Sizes: 20; IEC Conformity: NO; MIL Conformity: YES;
M85528/2-20-A-01
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-C-85528; MIL Conformity: YES; Material: ALUMINUM ALLOY; IEC Conformity: NO; Shell Sizes: 20;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved