Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Output Voltage-1: 1.3 V; Minimum Output Voltage-1: 1.2 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Adjustable Regulators - Negative Single Output Standard 7703406MX attributes and parameters. Explore more Adjustable Regulators - Negative Single Output Standard devices from Defense Logistics Agency
JESD-30 Code:
No. of Functions:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Surface Mount:
Terminal Form:
Terminal Position:
7703406MX Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
As the nation’s combat logistics support agency, the Defense Logistics Agency manages the end-to-end global defense supply chain – from raw materials to end user disposition – for the five military services, 11 combatant commands, other federal, state and local agencies and partner and allied nations. DLA’s mission is to “deliver readiness and lethality to the Warfighter Always and support our nation through quality, proactive global logistics.” To accomplish this mission, DLA has a staff of about 25,000 employees divided into multiple supply chains that contract for material and services across the military classes of supply, to include: subsistence (food/water), clothing and textiles, bulk petroleum and other energy products, construction material and equipment, personal demand items, medical material and equipment, and repair parts for land, sea and air systems.
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
LT337AM#PBF
Analog Devices
Analog Devices' LT337AM#PBF is a bipolar adjustable negative single output standard regulator with max input-output voltage differential of 40V. Operating temperature range from 0 to 125 °C makes it suitable for various applications requiring a min output voltage of 1.2V, max output current of 1.5A, and package style in-line with through-hole terminals.
LM137H
Texas Instruments
LM137H by Texas Instruments is an adjustable negative single output standard regulator with a max output current of 1.5 A and a max input-output voltage differential of 40 V. It is commonly used in applications requiring precise voltage regulation, such as power supplies and battery charging circuits.
LM337LBLX
LM337LBLX by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of -37V and max output current of 0.1A. It operates in temperatures ranging from -25°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
TIXH604
TIXH604 by Texas Instruments is an adjustable negative single output standard regulator with a max input-output voltage differential of 35V. It has a min output voltage of 5V and a max output voltage of 30V, making it suitable for applications requiring precise voltage regulation in various electronic devices. With its through-hole terminal form and flange mount package style, TIXH604 offers reliable performance in a compact rectangular design.
LM337AD2T
LM337AD2T by Onsemi is an adjustable negative single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It has a technology of bipolar, package style in small outline, and terminal pitch of 2.54mm. Ideal for applications requiring precise voltage regulation in compact spaces.
LM137HVH/883
LM137HVH/883 by Texas Instruments is an adjustable negative single output standard regulator with a max input-output voltage differential of 50V, operating temperature range from -55°C to 125°C, and max output current of 0.5A. It is designed for applications requiring precise voltage regulation in harsh environments as per MIL-STD-883 screening standards.
ICL7664CTV
Maxim Integrated
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: TO-99; Terminal Form: WIRE; Package Shape: ROUND; Adjustability: ADJUSTABLE;
LM337IMP/NOPB
National Semiconductor
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Technology: BIPOLAR; Terminal Position: DUAL;
OMR1033SR
Infineon Technologies
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: GULL WING; No. of Functions: 1; No. of Outputs: 1; Minimum Output Voltage-1: -1.2 V;
M38510/11804SYA
M38510/11804SYA by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max output current of 1.5A. Operating temperature ranges from -55°C to 150°C, making it suitable for various industrial applications requiring precise voltage regulation in harsh environments. Built with bipolar technology, this regulator comes in a round package style with flange mount and pin/peg terminal form for easy installation and reliable performance.
5962P8774101UX
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; Terminal Finish: TIN LEAD; Qualification Status: Not Qualified; JESD-609 Code: e0;
LM337LM
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; No. of Outputs: 1; Peak Reflow Temperature (C): 235;
LM337LZ
LM337LZ by Texas Instruments is an adjustable negative single output standard regulator with a max input-output voltage differential of 40V. Operating temperature ranges from -25 to 125°C, making it suitable for various applications requiring precise voltage regulation. With a max output current of 0.1A and load regulation of 1.5%, it is ideal for electronic devices needing stable power supply.
LM337TG
LM337TG by Onsemi is an adjustable negative single output standard regulator with a max output voltage of 37V and current of 1.5A. It operates at temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a min input-output voltage differential of 3V, this bipolar technology-based regulator offers reliable performance in diverse projects.
LM337T/NOPB
LM337T/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation such as power supplies and battery chargers. With a package style of flange mount and terminal finish of matte tin (Sn), this bipolar technology regulator offers reliable performance in a compact form factor.
LM237K
LM237K by STMicroelectronics is an adjustable negative single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. Operating temperature ranges from -25 °C to 150°C, making it suitable for various applications requiring precise voltage regulation in challenging environments. Its bipolar technology and metal package body ensure reliable performance and durability in diverse electronic systems.
LT337AM#TR
Analog Devices' LT337AM#TR is a BIPOLAR adjustable negative single output standard regulator with 1.5A max output current and 37V max output voltage. It operates in temperatures ranging from 0 to 125 °C, making it suitable for various applications requiring precise voltage regulation in electronic circuits.
LM337LMX
LM337LMX by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and a max load regulation of 1.5%. It operates in temperatures ranging from -25°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LM337H/NOPB
LM337H/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max output current of 1.5A and a min input-output voltage differential of 3V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in challenging environments. Its bipolar technology and gold terminal finish ensure reliable performance in industrial settings.
5962F0253201QXA
5962F0253201QXA by STMicroelectronics is an adjustable negative regulator with a max output current of 3A and operates from -55 °C to 150 °C. It features a total dose tolerance of 300k Rad(Si) and supports a voltage differential up to 35V. Ideal for high-reliability applications in harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Defense Logistics Agency
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved