Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Vyrian
MARBEL Systems
$15.831
Texas Native Microelectronics
$18.197
$16.923
$16.013
Kenton Components
$21.836
$19.216
Semicontronic
$29.000
$28.275
$28.130
One Stop Electronics
$34.000
Qasali Group International
$49.132
Native Components
Corphita
Northwest PG Solutions
Digital Potentiometers (DigiPOT) DS1804N-010 attributes and parameters. Explore more Digital Potentiometers (DigiPOT) devices from Dallas Semiconductor
Technology:
Sub-Category:
Resistance Law:
Nominal Total Resistance:
Control Interface:
Nominal Supply Voltage:
Minimum Operating Temperature:
Maximum Operating Temperature:
Temperature Grade:
Terminal Form:
Terminal Position:
No. of Terminals:
Terminal Finish:
Terminal Pitch:
No. of Positions:
Package Shape:
Package Body Material:
Package Style:
Package Code:
Package Equivalence Code:
Qualified:
JESD-30 Code:
JESD-609 Code:
DS1804N-010 Converters trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Dallas Semiconductor, acquired by Maxim Integrated in 2002 for $2.5 billion,was a company that designed and manufactured analog, digital, and mixed-signal semiconductors (integrated circuits, or ICs).Its specialties included communications products (including T/E and Ethernet products), microcontrollers, battery management, thermal sensing and thermal management, non-volatile random-access memory, microprocessor supervisors, delay lines, silicon oscillators, digital potentiometers, real-time clocks, temperature-compensated crystal oscillators (TCXOs), iButton, and 1-Wire products. Analog Devices, Inc. (NasdaqGS:ADI) completed the acquisition of Maxim Integrated Products, Inc. (NasdaqGS:MXIM) from a group of shareholders on August 26, 2021. Analog Devices, Inc. (ADI) empowers the Intelligent Edge with the world’s most innovative analog, digital, and software solutions, to accelerate breakthroughs that benefit society and the planet.
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
North American Philips Discrete Products Div
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
EU2B-YS3103F
Idec
ROTARY SWITCH;
Zetex Plc
AD8402AR10
Analog Devices
AD8402AR10 by Analog Devices is a 3-WIRE SERIAL digital potentiometer with 2 functions, 10000 ohm total resistance, and 256 positions. It has a temperature coefficient of 500 ppm/°C and operates b/w -40 to 125 °C. Ideal for automotive applications due to its CMOS technology and small outline package style.
AD5293BRUZ-20-RL7
AD5293BRUZ-20-RL7 by Analog Devices is a 3-WIRE SERIAL digital potentiometer with 20000 ohm resistance, 35 ppm/°C temp coefficient, and 1% resistance tolerance. It operates in industrial temperature range (-40 to 105 °C) and is ideal for applications requiring precise resistance adjustments in compact electronic devices.
AD5141BCPZ10-RL7
AD5141BCPZ10-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 100k ohm total resistance, 35 ppm/°C temp coefficient, and 256 positions. Ideal for automotive applications due to its -40 to 125 °C operating range and compact chip carrier package style. It offers precise resistance control in various circuits with a linear/logarithmic resistance law.
MCP4142-103E/MS
Microchip Technology
MCP4142-103E/MS by Microchip Technology is a 10000 ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C and has a control interface for increment/decrement. Suitable for automotive applications, it features a small outline package with 8 terminals and operates on 1.8/5 V supplies.
AD5206BRZ10
AD5206BRZ10 by Analog Devices is a 3-wire serial digital potentiometer with 6 functions and 10000 ohm total resistance. It operates in industrial temperature range (-40 to 85 °C) with a bandwidth of 0.721 kHz. Ideal for applications requiring precise resistance adjustments in compact designs.
MAX5417LETA+T
Analog Devices' MAX5417LETA+T is a 2-WIRE SERIAL digital potentiometer with 50k ohm total resistance, suitable for industrial applications. It offers linear resistance law, operates at -40 to 85 °C, and has a bandwidth of 0.1 kHz. Ideal for compact designs with its small outline package style and dual terminal position.
MCP4019T-502E/LT
MCP4019T-502E/LT by Microchip is a 5000 ohm digital potentiometer with 2-wire serial control interface. It operates in the temperature range of -40 to 125 °C and has a max resistance tolerance of 20%. Ideal for automotive applications, it offers a bandwidth of 2 kHz and requires a nominal voltage of 5 V.
MCP45HV51-104E/ST
MCP45HV51-104E/ST by Microchip Technology is a digital potentiometer with a 100000 ohm total resistance and 256 positions. It has a 2-wire serial control interface and operates at temperatures ranging from -40 to 125 °C. This automotive-grade device is suitable for applications requiring precise resistance adjustment.
X9C503PZ
Renesas Electronics
Renesas Electronics X9C503PZ is a 50kΩ linear digital potentiometer with INCREMENT/DECREMENT control interface. It operates b/w 0-70°C, has 8 terminals, and offers 100 positions. Ideal for applications requiring precise resistance adjustments in commercial-grade electronics.
MCP4251-503E/ML
MCP4251-503E/ML by Microchip Technology is a digital potentiometer with a total resistance of 50k ohm and a max resistor terminal voltage of 5V. It has a linear resistance law and can be controlled using an increment/decrement interface. This device is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
MAX5479ETE
Maxim Integrated
MAX5479ETE by Maxim Integrated is a 2-WIRE SERIAL digital potentiometer with 100k ohm total resistance, linear resistance law, and 70 ppm/°C temp coefficient. Ideal for industrial applications requiring precise voltage control in compact spaces due to its small form factor and wide operating temperature range from -40 to 85 °C.
MCP4132-503E/SN
MCP4132-503E/SN by Microchip is a digital potentiometer with 50000 ohm resistance, 150 ppm/°C temp coefficient, and 1 mA max supply current. It is used in automotive applications for increment/decrement control interface in small outline package style.
AD5206BRUZ100-RL7
AD5206BRUZ100-RL7 by Analog Devices is a 3-WIRE SERIAL digital potentiometer with 6 functions, 100k ohm resistance, and 30% tolerance. It operates b/w -40 to 85 °C for industrial applications, offering a bandwidth of 0.069 kHz and a supply voltage range of ±2.5 V.
DS18030-050+
DS18030-050+ by Analog Devices is a 2-function DigiPOT with 50000 ohm total resistance, controlled via 2-wire serial interface. It operates in industrial temperature range (-40 to 85 °C) and has a linear resistance law. Ideal for applications requiring precise digital potentiometer control at up to 3.5 V terminal voltage.
AD5259BCPZ5-R7
AD5259BCPZ5-R7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 5000 ohm resistance, suitable for industrial applications. It has 256 positions, operates at -40 to 85 °C, and offers a bandwidth of 2 kHz. The small outline package with a very thin profile makes it ideal for space-constrained designs.
AD5206BRZ100
AD5206BRZ100 by Analog Devices is a 3-wire serial digital potentiometer with 6 functions, 100k ohm total resistance, and 256 positions. It operates in industrial temperature range (-40 to 85°C) and has a max reflow temperature of 260°C. Ideal for applications requiring precise resistance adjustments in compact designs.
MCP41050-I/P
MCP41050-I/P by Microchip Tech is a 3-WIRE SERIAL digital potentiometer with 50000 ohm resistance, 256 positions, and 20% tolerance. It operates at -40 to 85 °C for industrial applications, offering a bandwidth of 0.28 kHz. Ideal for precise voltage control in various electronic systems.
AD5293BRUZ-100
AD5293BRUZ-100 by Analog Devices is a 3-WIRE SERIAL digital potentiometer with 100k ohm resistance, 1% tolerance, and 1024 positions. It operates in industrial temperature range (-40 to 105 °C) and has a CMOS technology with a bandwidth of 0.105 kHz. Ideal for applications requiring precise resistance adjustments in compact spaces.
MCP4013T-103E/CH
MCP4013T-103E/CH by Microchip is a 10000 ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C and has a max supply voltage of 5 V. Ideal for automotive applications, it features an increment/decrement control interface in a small outline package.
X9241AWSIZT1
Intersil
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Dallas Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved