Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DIGITAL POTENTIOMETER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
Median Price
$6.250
Lifecycle Status
Suppliers In-Stock
33
In-Stock Inventory
1k+
American Microsemiconductor Inc.
1+ parts
$5.910
100+ parts
-
1k+ parts
10k+ parts
Component Electronics Inc.
$16.920
$12.690
$11.000
Anansix
Vyrian
Nova Conductors
Q Components
Quantum Digital Technology
Sensible Micro Corp
Bristol Electronics
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Electronic Expediters
Digiode
Cyclops Electronics Ltd
Pride Electronics
Global Solutions Electronics Company
EMSNET
Mentor Electronics Marketing, LLC
R&J Components
Pegasus Components GmbH
ComSIT Distribution GmbH
Connector Distribution Corp
Right Parts Inc.
J & M Industries LLC
LIBRA Elektronik GmbH
Resion
Electronics Depot
Corel Iberica Componentes, S.L.
Inland Empire Components Inc.
Component Sense
Prism Electronics
ACDS - Activité Composants Distribution Service
Digital Electronic Gebert Verwaltungs UG
Holdelec - ElecDif-Pro
One Stop Electronics
$4.000
MARBEL Systems
$6.480
Texas Native Microelectronics
$7.448
$7.150
$6.927
$6.554
Kenton Components
$8.938
$7.865
AZTECH Wire
$12.809
Aztec Data Supply Inc.
$13.394
Qasali Group International
$20.110
$18.702
$17.696
Semicontronic
$23.000
$22.425
$22.310
Corohmni
$26.076
Modulus Dynamics
$30.916
Advanced Electronics
$31.329
$28.509
$25.690
Authorized Procurement Solutions
A-Z Elektronik GmbH
Alle Elektronik GmbH
Glotronic Ltd.
Argo Parts USA
Continental Prestige Electronics
Corphita
Component Stockers USA
$5.610
$5.220
Assy Fe
Microchip USA
Kepictronics
Perfect Parts
ChipTracer
Bastille Electronics
Digital Potentiometers (DigiPOT) DS1267S-010 attributes and parameters. Explore more Digital Potentiometers (DigiPOT) devices from Dallas Semiconductor
Resistance Law:
Nominal Total Resistance:
Control Interface:
No. of Functions:
Nominal Supply Voltage:
Minimum Operating Temperature:
Maximum Operating Temperature:
Temperature Grade:
Terminal Form:
Terminal Position:
No. of Terminals:
No. of Positions:
Package Shape:
Package Body Material:
Package Style:
Qualified:
JESD-30 Code:
DS1267S-010 Converters trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Dallas Semiconductor, acquired by Maxim Integrated in 2002 for $2.5 billion,was a company that designed and manufactured analog, digital, and mixed-signal semiconductors (integrated circuits, or ICs).Its specialties included communications products (including T/E and Ethernet products), microcontrollers, battery management, thermal sensing and thermal management, non-volatile random-access memory, microprocessor supervisors, delay lines, silicon oscillators, digital potentiometers, real-time clocks, temperature-compensated crystal oscillators (TCXOs), iButton, and 1-Wire products. Analog Devices, Inc. (NasdaqGS:ADI) completed the acquisition of Maxim Integrated Products, Inc. (NasdaqGS:MXIM) from a group of shareholders on August 26, 2021. Analog Devices, Inc. (ADI) empowers the Intelligent Edge with the world’s most innovative analog, digital, and software solutions, to accelerate breakthroughs that benefit society and the planet.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Toshiba
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MCP4021-103E/MS
Microchip Technology
MCP4021-103E/MS by Microchip: 10000 ohm linear DigiPOT with 150 ppm/°C temp coefficient. Ideal for automotive applications, featuring 64 positions and 1 kHz bandwidth. Operates b/w -40 to 125 °C with a max supply current of 0.45 mA.
AD5247BKSZ10-RL7
AD5247BKSZ10-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 10000 ohm total resistance, suitable for automotive applications. It offers a linear resistance law, 128 positions, and operates b/w -40 to 125 °C. Ideal for compact designs with its small outline package style and thin profile.
DS1267S-050
Maxim Integrated
DS1267S-050 by Maxim Integrated is a 3-WIRE SERIAL digital potentiometer with 50000 ohm total resistance and 256 positions. It operates at -40 to 85 °C, suitable for industrial applications requiring precise resistance adjustments in compact designs. The device features a linear resistance law and 20% tolerance, making it ideal for fine-tuning circuits with its small outline package.
DS3904U-020
DS3904U-020 by Maxim Integrated is a 2-WIRE SERIAL digital potentiometer with 3 functions, 20000 ohm total resistance, and 123 ppm/°C temperature coefficient. It is used in industrial applications for precise resistance adjustments in circuits with a voltage range of -0.3V to 5.5V.
X9271UV14Z-2.7
Renesas Electronics
X9271UV14Z-2.7 by Renesas Electronics is a 3-WIRE SERIAL digital potentiometer with 50000 ohm total resistance, 256 positions, and 20% resistance tolerance. It is ideal for applications requiring precise resistance adjustments in compact spaces, such as audio equipment and instrumentation due to its small outline package style. Operating temperature ranges from 0 to 70 °C.
MCP4151-502E/MS
MCP4151-502E/MS by Microchip is a 5000 ohm digital potentiometer with linear resistance law. It operates at 1.8/5 V, has 257 positions, and a bandwidth of 2 kHz. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact square package style.
DS1866Z+T&R
DS1866Z+T&R by Maxim Integrated is a linear digital potentiometer with 8 terminals and 3/5V power supplies. It operates in industrial temperature range (-40 to 85°C) and has a small outline package style for surface mount applications. With matte tin terminal finish, it is suitable for various electronic circuits requiring precise resistance adjustments.
MCP4151-103E/MF
MCP4151-103E/MF by Microchip is a 10000 ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C and has 257 positions for increment/decrement control interface. Suitable for automotive applications, it features a small outline package with very thin profile and matte tin terminal finish.
DS3502U+
DS3502U+ by Analog Devices is a 10kΩ digital potentiometer with 2-wire serial control interface. It operates b/w -40 to 100°C, has 128 positions, and a resistance tolerance of 20%. Ideal for industrial applications requiring precise resistance adjustments in compact spaces.
AD5232BRUZ50
AD5232BRUZ50 by Analog Devices is a 3-wire serial digital potentiometer with 2 functions and 50000 ohm total resistance. It operates in industrial temperature range, has 256 positions, and uses CMOS technology. Ideal for applications requiring precise resistance adjustments in compact spaces.
MCP4021-503E/MS
MCP4021-503E/MS by Microchip is a 50kΩ digital potentiometer with linear resistance law, controlled via increment/decrement interface. Ideal for automotive applications, it operates b/w -40 to 125°C, has 64 positions, and low supply current of 0.45mA.
AD5272BRMZ-50
AD5272BRMZ-50 by Analog Devices is a 10-terminal digital potentiometer with 1024 positions, offering a total resistance of 50k ohm and a linear resistance law. It operates in automotive-grade temperatures from -40 to 125 °C, making it suitable for precision applications requiring low temperature coefficient and high resolution control. The device features a 2-wire serial interface, small outline package style, and matte tin terminal finish for surface mount applications.
MCP4241-103E/P
MCP4241-103E/P by Microchip is a 10k ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C and has a bandwidth of 1 kHz. Ideal for automotive applications, it offers INCREMENT/DECREMENT control interface and operates on 1.8/5 V supplies.
MCP4021-502E/MS
MCP4021-502E/MS by Microchip Technology is a digital potentiometer with a nominal total resistance of 5000 ohm and a max resistor terminal voltage of 5 V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
X9C103SZT1
Renesas Electronics X9C103SZT1 is a digital potentiometer with 10000 ohm resistance, 300 ppm/°C temp coefficient, and 20% resistance tolerance. It is used in applications requiring precise incremental/decremental control of resistance values in commercial-grade temperature environments.
MCP4021-202E/MS
MCP4021-202E/MS by Microchip is a digital potentiometer with 2100 ohm total resistance, 64 positions, and 150 ppm/°C temperature coefficient. It is used in automotive applications for increment/decrement control interface, with a max operating temperature of 125 °C and CMOS technology.
CAT5113LI-10-G
Catalyst Semiconductor
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MCP4562T-103E/MS
MCP4562T-103E/MS by Microchip is a 10000 ohm digital potentiometer with linear resistance law. It operates at 3/5V, has 257 positions, and offers INCREMENT/DECREMENT control interface. Ideal for automotive applications due to its TS16949 screening level and wide temperature range (-40 to 125°C).
AD8403ARUZ100-REEL
AD8403ARUZ100-REEL by Analog Devices is a 4-function digital potentiometer with 100k ohm total resistance, controlled via 3-wire serial interface. Ideal for automotive applications, it operates b/w -40 to 125 °C with a max voltage of 5.5 V, offering precise resistance adjustments in compact form factor.
MAX5479EUD+
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Dallas Semiconductor
DIGITAL POTENTIOMETER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Shape: RECTANGULAR; Surface Mount: YES;
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
DS1267S-050+
DS1267BS-050+
DS1267S-010
DS1267S-010+
DS1267BS-100+
DS1267BS-100+ by Analog Devices is a 3-WIRE SERIAL Digital Potentiometer with 100k ohm resistance, 256 positions, and 750 ppm/°C temperature coefficient. It is used in industrial applications for precise resistance adjustments in compact designs.
DS1267S-010+T&R
DS1267S-010/T&R
DS1267S-100
DS1267S-100+
DIGITAL POTENTIOMETER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
DS1267S-050+T&R
DS1267S-050/T&R
DS1267-050+
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
DS1267-050
DIGITAL POTENTIOMETER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
DS1267SN-10
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved