Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Delay Lines; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$10.560
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$9.450
10k+ parts
$8.900
Digiode
$11.182
American Microsemiconductor Inc.
$12.180
Nova Conductors
$13.651
Chip Stock
Anansix
DigiKey Marketplace
Vyrian
Electronics Depot
Zilex Electronics Inc.
Semicontronic
$10.000
$9.750
$9.700
Corphita
$10.593
Component Stockers USA
$11.870
$11.160
$10.100
MARBEL Systems
$12.164
Netroflash
$12.969
$12.696
Texas Native Microelectronics
$13.982
$13.423
$13.003
$12.304
Kenton Components
$16.778
$14.765
Ampacity Inc.
$21.770
Modulus Dynamics
$23.410
Qasali Group International
$37.751
$35.109
$33.221
QUARKTWIN TECHNOLOGY LTD
Glotronic Ltd.
Microchip USA
RC Electronics
$13.940
$13.150
$12.880
Delay Lines DS1023S-25 attributes and parameters. Explore more Delay Lines devices from Dallas Semiconductor
JESD-30 Code:
JESD-609 Code:
No. of Functions:
No. of Taps/Steps:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Maximum Power Supply Current (ICC):
Programmable Delay Line:
Propagation Delay At Nominal Supply:
Qualification:
Sub-Category:
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
DS1023S-25 Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EOL 15/Jan/2016
Dallas Semiconductor, acquired by Maxim Integrated in 2002 for $2.5 billion,was a company that designed and manufactured analog, digital, and mixed-signal semiconductors (integrated circuits, or ICs).Its specialties included communications products (including T/E and Ethernet products), microcontrollers, battery management, thermal sensing and thermal management, non-volatile random-access memory, microprocessor supervisors, delay lines, silicon oscillators, digital potentiometers, real-time clocks, temperature-compensated crystal oscillators (TCXOs), iButton, and 1-Wire products. Analog Devices, Inc. (NasdaqGS:ADI) completed the acquisition of Maxim Integrated Products, Inc. (NasdaqGS:MXIM) from a group of shareholders on August 26, 2021. Analog Devices, Inc. (ADI) empowers the Intelligent Edge with the world’s most innovative analog, digital, and software solutions, to accelerate breakthroughs that benefit society and the planet.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
Promax-johnton
Meritek Electronics
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS1100U-125+
Analog Devices
Analog Devices' DS1100U-125+ is a delay line with 125ns propagation delay at 5V, suitable for industrial applications. It features 5 taps/steps, CMOS technology, and a 50 ohm output impedance. With a small outline package and dual terminals, it operates b/w -40 to 85°C.
LTC6994IS6-2#TRM
Linear Technology
Delay Lines; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR;
DS1013S-50+T&R
Maxim Integrated
SILICON DELAY LINE; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MXD1000-150CPD
SILICON DELAY LINE; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
MXD1013-40ESA
Analog Devices' MXD1013-40ESA is a TTL delay line with 40ns total delay, operating from -40 to 85 °C. With 8 terminals in a small outline package, it's ideal for industrial applications requiring precise signal delays and true output polarity. The surface-mount device features a peak reflow temperature of 240°C and dual terminal position for easy integration.
DS1013S-80+
DS1100LU-30
DS1100LU-30 by Maxim Integrated is a delay line with 30ns propagation delay at 3.3V, featuring 5 taps/steps and CMOS technology. It is used in industrial applications for true output polarity control, with a small outline package style suitable for surface mount installation.
DS1100LZ-30+
DS1100LZ-30+ by Analog Devices is a CMOS delay line with 30ns propagation delay at 3.3V, ideal for industrial applications. It features 5 taps/steps, true output polarity, and 50 ohm nominal impedance. With a small outline package and dual terminals, it operates b/w -40 to 85°C for precise timing control in electronic circuits.
MXD1013-65CPA
Analog Devices' MXD1013-65CPA is a TTL delay line with 3 functions, 65ns total delay, and operates at 5V. It comes in an in-line package style with 8 terminals for commercial applications requiring precise signal delays.
TDA4662T-T
NXP Semiconductors
ACTIVE DELAY LINE; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MXD1013-40CPA
Analog Devices' MXD1013-40CPA is a TTL delay line with 3 functions, 40ns total delay, and true output polarity. It operates in commercial temperature range of 0-70 °C, ideal for applications requiring precise signal delays in electronic circuits. With through-hole terminals and compact dimensions (9.375mm x 7.62mm x 4.572mm), it offers reliable performance in various electronic systems.
DS1100LZ-35+
DS1100LZ-35+ by Analog Devices is a delay line with 35ns propagation delay at 3.3V, suitable for industrial applications. It features CMOS technology, 5 taps/steps, and a small outline package style. With a max operating temperature of 85°C and surface mount capability, it offers precise signal delays in compact designs.
MXD1005PA75
Analog Devices' MXD1005PA75 is a CMOS delay line with 75ns propagation delay at 5V. With 8 terminals in an in-line package, it operates b/w -40 to 85 °C, making it ideal for industrial applications requiring precise signal delays. The rectangular plastic/epoxy body measures 9.375mm x 7.62mm x 4.572mm and has true output polarity.
SY100EP195VTG-TR
Microchip Technology
SY100EP195VTG-TR by Microchip Technology is a delay line with 32 terminals, ECL technology, and 1023 taps. It operates at a supply voltage range of 3V to 5.5V and offers a total delay of 12.2ns. Ideal for industrial applications requiring precise signal delays in compact spaces due to its thin profile flatpack design and complementary output polarity.
LTC6994HDCB-1#TRPBF
SILICON DELAY LINE; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: RECTANGULAR;
DS1003M-16
Delay Lines; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS1100U-60+T&R
DS1100U-60+T&R by Analog Devices is a delay line with 60ns propagation delay, suitable for industrial applications. It features CMOS technology, 5 taps/steps, and 50 ohm output impedance. With a small outline package style and dual terminal position, it operates b/w -40 to 85 °C at a supply voltage of 4.75-5.25V.
DS1135U-010
Analog Devices' DS1135U-010 is a delay line with 3 functions, 10ns total delay, and 50 ohm output impedance. It operates in industrial temperature range (-40 to 85 °C) and has a supply voltage of 4.75V to 5.25V. Ideal for applications requiring precise signal delays in small outline packages.
DS1135U-025
DS1135U-025 by Analog Devices is a delay line with 3 functions, 25ns total delay, and 50 ohm output impedance. It operates in industrial temperature range (-40 to 85 °C) and has a supply voltage of 4.75V to 5.25V. Suitable for applications requiring precise signal delays in small outline packages.
MXD1013-70ESA
Analog Devices' MXD1013-70ESA is a TTL delay line with 70ns total delay, suitable for industrial applications. It features 3 functions in a small outline package, operating b/w -40 to 85 °C. With surface mount capability and true output polarity, it offers precise time delays in a compact form factor.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Dallas Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved