Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SA324491F35HLR by Cts is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 3 PPM/year aging. Ideal for applications requiring precise timing at 49.152 MHz, it features a parallel fundamental type with surface mounting feature and operates b/w -40°C to 125°C.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Corohmni
$0.457
Aztec Data Supply Inc.
$1.810
AZTECH Wire
$5.612
Continental Prestige Electronics
Argo Parts USA
Advanced Electronics
Aranea Global
This product offers a tight frequency tolerance, ensuring accurate and reliable operation.
Provides a stable frequency output, essential for maintaining consistency in various applications.
Low series resistance helps in efficient power transfer and minimizes signal loss.
Capable of functioning in extreme low-temperature environments, making it suitable for a wide range of applications.
The gold over nickel terminal finish enhances conductivity and provides excellent corrosion resistance.
This type of crystal resonator offers high precision and stability in frequency generation.
Operating at a specific frequency of 49.152 MHz makes it ideal for applications requiring this frequency.
Low aging rate ensures long-term stability and accuracy in frequency output.
Optimal load capacitance for efficient performance and frequency accuracy.
Easy to mount on circuit boards, saving space and facilitating automated assembly.
Requires low drive power for operation, contributing to energy efficiency and reduced power consumption.
Compact size makes it suitable for compact electronic devices and applications with space constraints.
Capable of withstanding high temperatures, ensuring reliable operation in various environments.
Crystal Oscillators SA324491F35HLR attributes and parameters. Explore more Crystal Oscillators devices from Cts
Additional Features:
Aging:
Crystal or Resonator Type:
Drive Level:
Frequency Stability:
Frequency Tolerance:
JESD-609 Code:
Load Capacitance:
Mounting Feature:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Physical Dimension:
Series Resistance:
Terminal Finish:
SA324491F35HLR Crystals & Resonators trade compliance attributes, and parameters.
HTS
8541.60.00.60
SB
Founded in 1896, CTS Corporation (NYSE: CTS) is a leading designer and manufacturer of products that Sense, Connect, and Move. The company manufactures sensors, actuators, and electronic components in North America, Europe, and Asia. CTS provides solutions to OEMs in the aerospace, communications, defense, industrial, information technology, medical, and transportation markets. CTS focuses on providing advanced technology, exceptional customer service and superior value to industry partners throughout the globe. CTS aims to be at the forefront of technology, delivering innovative sensing, connectivity and motion solutions for the creation and advancement of products and services around the world.
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
World Products
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
Taitron Components
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
International Semiconductor
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
FC-12M32.7680KA-A3
Seiko Epson
Seiko Epson's FC-12M32.7680KA-A3 crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 90000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in a compact 2.05mm X 1.2mm X 0.6mm surface mount package with GOLD terminal finish.
ABM8G-12.000MHZ-B-4-Y-T3
Abracon
ABM8G-12.000MHZ-B-4-Y-T3 by Abracon is a 12 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Features gold over nickel terminal finish and operates b/w -20°C to 70°C temperature range.
ABMM2-11.0592MHZ-E2-T
ABMM2-11.0592MHZ-E2-T by Abracon is a 11.0592 MHz crystal oscillator with 20 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, such as communication systems and industrial equipment.
MC-40632.7680K-A0:PURESN
MC-40632.7680K-A0:PURESN by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as precision timekeeping in temperature-sensitive environments.
CM250C32000AZFT
Citizen Finedevice
Citizen Finedevice's CM250C32000AZFT crystal oscillator offers 30 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at a nominal frequency of 0.032 MHz, with surface mounting feature and tin/silver terminal finish.
ATS120SM-1E
Cts
Cts ATS120SM-1E crystal oscillator offers 30 ppm frequency tolerance, 50% stability, and 40 ohm series resistance. Ideal for applications requiring precise timing at 12 MHz frequency, with a wide operating temperature range from -40 to 85 °C. Suitable for surface mount installations due to compact size of 11.1mm X 4.83mm X 4.3 mm.
405I35B12M00000
Cts 405I35B12M00000 crystal oscillator offers 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring a 12 MHz nominal operating frequency, with -40 to 85 °C temperature range. Features include GOLD OVER NICKEL finish, PARALLEL - FUNDAMENTAL type, and compact 5mm x 3.2mm x 0.85mm dimensions.
ABS25-32.000KHZ-T
Abracon's ABS25-32.000KHZ-T crystal oscillator offers 30 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring a 0.032 MHz nominal operating frequency in a surface mount configuration with -40 to 85 °C temperature range.
HC49USM-FF5F18-10.000MHZ
Ilsi America
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/YEAR; Minimum Operating Temperature: -40 Cel; Additional Features: AT CUT;
RT3215-32.768-12.5-TR-NS19
Raltron Electronics
Raltron Electronics' RT3215-32.768-12.5-TR-NS19 is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency, such as IoT devices due to its compact size of 3.2mm x 1.5mm x 0.8mm and low drive level of 1 uW.
ABM3-16.000MHZ-D2Y-T
ABM3-16.000MHZ-D2Y-T by Abracon is a 16 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C, featuring nickel gold finish and parallel-fundamental type.
TSX-322525.0000MF10Z-W6
TSX-322525.0000MF10Z-W6 by Seiko Epson is a 25 MHz crystal oscillator with 10 ppm frequency tolerance and 10% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Features surface mounting and operates b/w -20°C to 75°C temperature range.
R1210-37.400-8-F-1010-TR
Raltron Electronics' R1210-37.400-8-F-1010-TR crystal oscillator offers 10 ppm frequency tolerance and 10% stability, with a series resistance of 150 ohm. Ideal for applications requiring a parallel-fundamental type crystal resonator at 37.4 MHz, it operates b/w -10°C to 60°C temperatures in surface mount setups.
TSX-322525.0000MF18X-W3
TSX-322525.0000MF18X-W3 by Seiko Epson is a 25 MHz crystal oscillator with 10 ppm frequency tolerance and 18% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Operating temperature range from -40 to 85 °C ensures reliable performance in various environments.
ABM8G-24.000MHZ-18-D-2-Y-T
ABM8G-24.000MHZ-18-D-2-Y-T by Abracon is a 24 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications equipment and industrial automation systems.
ECX-.327-CDX-1293
Ecs International
ECX-0.327-CDX-1293 by Ecs International is a crystal oscillator with 5 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as telecommunications and industrial automation due to its compact surface mount design and gold terminal finish.
ECS-240-12-37B-CKY-TR
ECS-240-12-37B-CKY-TR by Ecs International is a crystal oscillator with 10 ppm frequency tolerance, 10% stability, and 50 ohm series resistance. Ideal for applications requiring precise timing at 24 MHz, it operates b/w -30°C to 85°C. This surface mount device features gold terminal finish and offers low aging of 1 PPM/first year.
ECS-.327-12.5-1210-TR
ECS-0.327-12.5-1210-TR by Ecs International is a crystal oscillator with a frequency tolerance of 20 ppm and frequency stability of 144%. It has a series resistance of 90000 ohm and is suitable for applications requiring precise timing in electronic devices.
ABS05-32.768KHZ-7-T
Abracon's ABS05-32.768KHZ-7-T crystal oscillator offers 20 ppm frequency tolerance, 72% stability, and 90000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices due to its compact size and low power consumption of 0.5 uW.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SA324400F35HLR
SA324400F35HLR by Cts is a crystal oscillator with a frequency tolerance of 30 ppm and frequency stability of 50%. It is commonly used in applications requiring a nominal operating frequency of 40 MHz, such as telecommunications and wireless devices.
SA324410F35HLR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; Drive Level: 10 uW; Load Capacitance: 12 pF;
SA324440F35HLR
SA324440F35HLR by Cts is a 44 MHz crystal oscillator with a frequency tolerance of 30 ppm and frequency stability of 50%. It is commonly used in applications requiring precise timing, such as telecommunications and industrial automation.
SA324450F35HLR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; Physical Dimension: 3.2mm X 2.5mm X 0.8mm; Additional Features: AEC-Q200; AT-CUT;
SA324480F35HLR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; JESD-609 Code: e4; Nominal Operating Frequency: 48 MHz;
SA324080F35HLR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; Series Resistance: 500 ohm; JESD-609 Code: e4;
SA324491F36MGR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; Drive Level: 10 uW; Physical Dimension: 3.2mm X 2.5mm X 0.8mm;
SA324491F37IGR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; Minimum Operating Temperature: -40 Cel; Series Resistance: 50 ohm;
SA324491F35GER
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; Minimum Operating Temperature: -40 Cel; Frequency Stability: 50 %;
SA324491F36MLR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; Minimum Operating Temperature: -50 Cel; Maximum Operating Temperature: 125 Cel;
SA324491F36GJR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; Physical Dimension: 3.2mm X 2.5mm X 0.8mm; Maximum Operating Temperature: 105 Cel;
SA324491F37PLR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; Terminal Finish: GOLD OVER NICKEL; Additional Features: AEC-Q200; AT-CUT;
SA324491F32ILR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; Frequency Stability: 20 %; Physical Dimension: 3.2mm X 2.5mm X 0.8mm;
SA324491F35HSR
SERIES - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel;
SA324491F35HVR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; Physical Dimension: 3.2mm X 2.5mm X 0.8mm; Maximum Operating Temperature: 125 Cel;
SA324491F35ISR
SERIES - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; Maximum Operating Temperature: 85 Cel; Physical Dimension: 3.2mm X 2.5mm X 0.8mm;
SA324491F36NBR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; JESD-609 Code: e4; Physical Dimension: 3.2mm X 2.5mm X 0.8mm;
SA324491F36PAR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; Nominal Operating Frequency: 49.152 MHz; JESD-609 Code: e4;
SA324491F37GCR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; JESD-609 Code: e4; Load Capacitance: 16 pF;
SA324491F37GFR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; Additional Features: AEC-Q200; AT-CUT; Nominal Operating Frequency: 49.152 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved