Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Cts 219-8LPSTJRF is a DIP switch with 8 sections, SPST function, and gold-plated contacts. It has a polyethylene housing, operates b/w -55 to 85 °C, and offers 2000 cycles of electrical life. Ideal for applications requiring OFF-ON contact function in electronic devices.
Median Price
$0.836
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$0.760
VNN
Vyrian
Netroflash
Advanced Electronics
$4.138
$3.766
$3.393
Andel Nordic
$8.401
$8.065
AZTECH Wire
$21.520
POLYETHYLENE - Provides durability and resistance to various environmental factors, making it a reliable choice for long-term use.
WAVE - Ensures easy and secure soldering during assembly, saving time and effort.
2000 Cycle(s) - Offers a high number of cycles for reliable performance over an extended period of time.
1000000000 ohm - Ensures proper electrical isolation between circuits for safe and efficient operation.
6.7 inch - Compact size allows for space-saving installation in various applications.
BOTTOM SEALED; TOP TAPE SEALED - Provides protection against dust and moisture ingress, increasing the product's lifespan.
8 - Allows for versatile configuration options to suit different circuit requirements.
SPST - Offers a simple ON-OFF function for easy operation and control.
DIP & SIP Switches 219-8LPSTJRF attributes and parameters. Explore more DIP & SIP Switches devices from Cts
Insulation Resistance:
Contact Resistance:
Contact Maximum DC Rating (R Load):
Contact Maximum DC Current:
Contact Maximum DC Voltage:
Mounting Type:
Length/Diameter:
Height:
Width:
Packing Method:
Termination Type:
Terminal Finish:
Contact End Plating:
Contact End Material:
Minimum Operating Temperature:
Maximum Operating Temperature:
Sealing Type:
Lifespan:
JESD-609 Code:
Additional Features:
219-8LPSTJRF Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.65
SB
PCN Assembly/Origin - Mult Series 2nd Source 01/Apr/2021
Founded in 1896, CTS Corporation (NYSE: CTS) is a leading designer and manufacturer of products that Sense, Connect, and Move. The company manufactures sensors, actuators, and electronic components in North America, Europe, and Asia. CTS provides solutions to OEMs in the aerospace, communications, defense, industrial, information technology, medical, and transportation markets. CTS focuses on providing advanced technology, exceptional customer service and superior value to industry partners throughout the globe. CTS aims to be at the forefront of technology, delivering innovative sensing, connectivity and motion solutions for the creation and advancement of products and services around the world.
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
First Components International
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
M24308/2-1F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
Nexperia
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
A6S-6101-H
Omron
Omron A6S-6101-H DIP & SIP Switch offers 1000 cycles Electrical Life, 100M ohm Insulation Resistance, and SPST Switch Function. Ideal for applications requiring ON-OFF Contact Function with 24VDC Max DC Contact Voltage.
1-1825002-3
TE Connectivity
TE Connectivity's 1-1825002-3 is a DIP & SIP switch with a white actuator and polyphenylene sulphide housing material. It has a wave solderability and copper alloy terminals. This slide dip switch is commonly used in applications requiring ON-OFF contact function, such as PCBs, with a max DC contact current of 1A.
97C02SRT
Grayhill
Grayhill's 97C02SRT is a DIP & SIP switch with SPST function. Featuring gold over nickel plating, it has 1000 cycles electrical life and operates b/w -40 to 85°C. Ideal for applications requiring slide dip switches with 2 positions and 0.025A@24VDC max contact DC rating.
219-2MSTJ
Cts
219-2MSTJ by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 2000 cycles electrical life, operates b/w -55 to 85 °C, and withstands up to 500VAC. Ideal for ON-OFF applications in electronics requiring a latched SLIDE DIP SWITCH design with SOLDER termination.
A6TR-2104
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: 2; Minimum Operating Temperature: -20 Cel; Maximum DC Contact Voltage: 24 V; null: DPST;
SDA04H0SBR
C & K Components
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: BERYLLIUM COPPER; Electrical Life: 1000 Cycle(s); null: ON-OFF; Maximum Contact DC Rating (R Load): 0.1A@5VDC;
A6SN-9101
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: 300VAC; null: ON-OFF; Sealing: IP40; WATER PROOF; Body Width: 7.5 inch;
A6E-6101
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Minimum Operating Temperature: -20 Cel; Contact Resistance: 200 mohm; null: 2; Manufacturer Series: A6E;
76RSC04T
Grayhill's 76RSC04T is a SPDT slide DIP switch with 4 sections, rated for 2000 cycles. With a max DC contact voltage of 30V and current of 0.15A, it operates b/w -40 to 85°C. Ideal for applications requiring latched switch action and through-hole mounting.
A6HF-0102
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Operating Temperature: 85 Cel; null: LATCHED; JESD-609 Code: e4; Packing Method: TUBE;
204-222ST
204-222ST by Cts is a DPDT slide DIP switch with 2 sections, sealed body, and solder termination. It has a max DC contact rating of 0.1A@50VDC and operates b/w -40 to 85 °C. Ideal for surface mount applications requiring latched switch action.
A6S-3101-H
Omron A6S-3101-H DIP & SIP Switch offers 1000 cycles electrical life, 100M ohm insulation resistance, and SPST switch function. Ideal for applications requiring a flat type actuator, with a max DC contact voltage of 24V and operating temperatures from -20 to 70°C.
1825140-1
Tyco Electronics Alcoswitch
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: LATCHED; Electrical Life: 1000 Cycle(s); Termination Type: SOLDER; null: SPST;
A6H-0102
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Sealing: TAPE SEALED; Maximum DC Contact Voltage: 24 V; Body Width: 4.5 inch; Termination Type: SOLDER;
BD01
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: GOLD OVER NICKEL; Terminal Length: .141 inch; Body Width: 9.65 inch; Body Length/Diameter: 9.65 mm;
219-6MSTR
219-6MSTR by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 6 sections, SPST function, and operates b/w -55 to 85 °C. Ideal for ON-OFF applications in electronics requiring a reliable slide dip switch with 2000 cycles lifespan.
A6FR-8101
DIP Switches; null: PIANO DIP SWITCH;
204-123ST
204-123ST by Cts is a DIP & SIP switch with a body width of 10.41in and a body height of 9.12mm. It has three switch sections and a SPDT switch function, making it suitable for various applications requiring slide dip switches.
GDH06SA04
TE Connectivity's GDH06SA04 is a 6-section SPST slide DIP switch with white actuator and polyphenylene sulphide housing. It features gold over nickel plating, copper alloy contacts, and can handle 0.1A AC/DC current at 50V. Ideal for panel mounting applications in electronics requiring reliable switching capabilities.
5435802-2
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Body Width: 9.65 inch; null: 3; Termination Type: SOLDER; Additional Features: LOW PROFILE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
219-8MSTRF
219-8MSTRF by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 8 sections, SPST function, and operates b/w -55 to 85 °C. Ideal for OFF-ON applications with 2000 cycles durability and 1000000000 ohm insulation resistance.
219-8MSTR
219-8MSTR by Cts is a DIP & SIP switch with 8 sections, SPST function, and gold plating. It has a POLYETHYLENE housing, BERYLLIUM COPPER end contacts, and operates b/w -55 to 85 °C. Ideal for ON-OFF applications with 2000 cycles electrical life and 1000000000 ohm insulation resistance.
219-8LPSTR
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: WAVE; null: 500VAC; Contact Resistance: 25 mohm; null: ON-OFF;
219-8LPSTRF
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: BERYLLIUM COPPER; Packing Method: TR; null: LATCHED; null: WAVE;
219-8MST
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: 8; Additional Features: APPROVAL: UL; JESD-609 Code: e4; null: SLIDE DIP SWITCH;
219-8LPSTJF
219-8LPSTJF by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 8 sections, SPST function, and operates b/w -55 to 85 °C. Ideal for OFF-ON applications with 2000 cycles electrical life and 1000000000 ohm insulation resistance.
219-8MSTJ
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Length/Diameter: 21.79 mm; null: MEDIUM; Maximum Contact DC Rating (R Load): 0.1A@20VDC; Electrical Life: 2000 Cycle(s);
219-8MSTJF
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Length/Diameter: 21.79 mm; null: GOLD; Insulation Resistance: 1000000000 ohm; Sealing: BOTTOM SEALED; TOP TAPE SEALED;
219-8MSTF
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Terminal Finish: Tin (Sn); Minimum Operating Temperature: -55 Cel; null: POLYETHYLENE; Maximum Contact DC Rating (R Load): 0.1A@20VDC;
219-8MSTJR
The Cts 219-8MSTJR is a DIP & SIP switch with a polyethylene housing material and wave solderability. It has 8 switch sections, SPST switch function, and a max DC contact current of 0.1A@20VDC. This switch is commonly used in electronic devices for on-off control and surface mount-straight mounting.
219-8MSTJRF
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: POLYETHYLENE; null: 500VAC; Contact Resistance: 25 mohm; null: POLYETHYLENE;
219-8LPST
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: FLUSH TYPE; Terminal Finish: Tin (Sn); null: 8; Sealing: BOTTOM SEALED; TOP TAPE SEALED;
219-8LPSTF
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: POLYETHYLENE; Sealing: BOTTOM SEALED; TOP TAPE SEALED; Body Width: 6.7 inch; null: WAVE;
219-8LPSTJ
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; JESD-609 Code: e3; Maximum Operating Temperature: 85 Cel; Maximum Contact DC Rating (R Load): 0.1A@20VDC; null: POLYETHYLENE;
219-8LPSTJR
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; End Contact Material: BERYLLIUM COPPER; Body Length/Diameter: 21.79 mm; null: 8; Maximum Operating Temperature: 85 Cel;
219-8LPSJRF
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: POLYETHYLENE; JESD-609 Code: e3; null: WAVE; Contact Resistance: 25 mohm;
219-8LPSJR
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum DC Contact Current: .1 A; End Contact Plating: GOLD; Maximum Operating Temperature: 85 Cel; Electrical Life: 2000 Cycle(s);
219-8LPSJ
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: 500VAC; Contact Resistance: 25 mohm; Electrical Life: 2000 Cycle(s); Maximum DC Contact Voltage: 20 V;
219-8LPSRF
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Operating Temperature: 85 Cel; Body Height: 4.05 mm; Maximum Contact DC Rating (R Load): 0.1A@20VDC; null: GOLD;
219-8LPSR
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Operating Temperature: 85 Cel; Packing Method: TR; Maximum DC Contact Voltage: 20 V; Electrical Life: 2000 Cycle(s);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved