Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Cts 206-4 DIP & SIP Switch offers 10000 cycles electrical life, 1000000000 ohm insulation resistance, and SPST switch function. With a body width of 9.78in and height of 7.6mm, it is ideal for applications requiring OFF-ON contact function in electronic devices operating b/w -55 to 85°C temperatures.
Median Price
$0.990
Lifecycle Status
Suppliers In-Stock
44
In-Stock Inventory
1k+
Avnet
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$2.380
$1.560
$1.510
DigiKey
$7.490
Verical
$0.845
$0.513
$0.439
NEP Electronics
$0.750
$0.600
Heilind Electronics
Interstate Connecting
Nova Conductors
$0.401
Voyager Components
$0.405
Freelance Electronics
$0.499
$0.598
$0.494
Component Electronics Inc.
$0.770
$0.580
$0.500
DF Sales Co.
$0.998
Manoshevitz Elec. Sales
NAC Semi
$0.675
$0.623
Vyrian
VNN
Electro Sonic
$0.645
$0.557
$0.416
Classic Components Corporation
Prism Electronics
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Astute Electronics Inc
ComSIT Distribution GmbH
Electronic Expediters
ZD Integrated Circuits Inc.
Bristol Electronics
Lakeland Logistics Inc
Mentor Electronics Marketing, LLC
Resion
Connector Distribution Corp
Right Parts Inc.
Electronics Depot
MISTER SPROCKETS
PAR Electronics
Legend Electronics Inc.
Atlantic Semiconductor
A2Z Electronics, Inc.
EMSNET
First Choice Components Inc.
Quantum Digital Technology
Electronic Treasures
LWI Electronics Inc
Ampacity Inc.
$0.392
Perfect Parts
Argo Parts USA
Authorized Procurement Solutions
Aranea Global
Continental Prestige Electronics
Metaverse IC Inc.
Assy Fe
EMSNET (Excess)
Long electrical life ensures durability and reliability for long-term use.
High insulation resistance helps in preventing leakage of current and ensures safe operation.
Compact body width allows for space-saving installation in electronic devices.
Multiple switch sections provide flexibility in creating different configurations for specific applications.
Single Pole Single Throw switch function is commonly used and versatile for various electronic circuits.
Gold end contact plating ensures good conductivity, low contact resistance, and corrosion resistance.
Low body height allows for easy integration into compact electronic designs.
Wide operating temperature range ensures reliable performance in various environmental conditions.
Low minimum operating temperature allows for use in extreme cold environments.
Gold terminal finish provides excellent conductivity and ensures long-term reliability.
Copper alloy end contact material offers good electrical conductivity and durability.
Multiple positions provide flexibility in switch configurations for different functions.
The PCB hole count allows for secure mounting on a circuit board for reliable connection.
Slide actuator type offers ease of operation and clear indication of switch position.
High maximum DC contact voltage rating allows for use in a wide range of electronic applications.
Slide DIP switch type is commonly used and offers easy manual operation.
Gold center contact plating ensures low contact resistance and reliable signal transmission.
High dielectric withstand voltage protects against electrical breakdown and ensures safety.
Off-On contact function allows for easy switching between two states.
Anti-static tube packing method ensures proper protection and safe transportation of the switches.
Optimal body length/diameter ratio for easy integration and installation in electronic devices.
High maximum contact DC rating allows for reliable switching of current up to 0.05A at 24VDC.
Copper alloy center contact material provides good conductivity and durability for long-term use.
The actuator length ensures precise and easy operation of the switch.
High maximum DC contact current rating allows for reliable switching of current up to 0.05A.
Latched switch action provides a stable switch position until manually changed.
Solder termination type ensures secure and reliable connection to the circuit board.
Low contact resistance ensures minimal power loss and reliable signal transmission.
Through-hole straight mounting feature provides secure and stable installation on the circuit board.
The terminal length allows for easy and secure soldering to the circuit board.
DIP & SIP Switches 206-4 attributes and parameters. Explore more DIP & SIP Switches devices from Cts
Insulation Resistance:
Contact Resistance:
Contact Maximum DC Rating (R Load):
Contact Maximum DC Current:
Contact Maximum DC Voltage:
Mounting Type:
Length/Diameter:
Height:
Width:
PCB Hole Count:
Packing Method:
Terminal Length:
Termination Type:
Terminal Finish:
Contact End Plating:
Contact End Material:
Minimum Operating Temperature:
Maximum Operating Temperature:
Lifespan:
JESD-609 Code:
Additional Features:
206-4 Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.65
SB
Founded in 1896, CTS Corporation (NYSE: CTS) is a leading designer and manufacturer of products that Sense, Connect, and Move. The company manufactures sensors, actuators, and electronic components in North America, Europe, and Asia. CTS provides solutions to OEMs in the aerospace, communications, defense, industrial, information technology, medical, and transportation markets. CTS focuses on providing advanced technology, exceptional customer service and superior value to industry partners throughout the globe. CTS aims to be at the forefront of technology, delivering innovative sensing, connectivity and motion solutions for the creation and advancement of products and services around the world.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
EU2B-YS3203F
Idec
ROTARY SWITCH;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
261
Deltrol Controls
Other Relays;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Onsemi
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138DW-7-F
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
International Semiconductor
5161390-1
TE Connectivity
TE Connectivity 5161390-1 is a SPST slide DIP switch with red actuator. It has glass filled nylon housing, phosphor bronze terminal material, and 2000 cycles electrical life. Ideal for applications requiring latched switch action, it offers 1000000000 ohm insulation resistance and operates b/w -25 to 70 °C.
A6S-5104-H
Omron
Omron A6S-5104-H is a DIP switch with 5 sections, SPST function, and gold terminal finish. It has an electrical life of 1000 cycles and insulation resistance of 100M ohm. Ideal for applications requiring ON-OFF contact function in electronic devices.
76SB03T
Grayhill
Grayhill's 76SB03T is a Slide DIP Switch with 3 switch sections, SPST function, and 2000 cycles electrical life. It operates b/w -40 to 85°C, with max DC contact voltage of 30V and current of 0.15A. Ideal for applications requiring through-hole mounting such as industrial controls and electronic devices.
5-1825059-3
TE Connectivity's 5-1825059-3 DIP & SIP Switch features POLYPHENYLENE SULPHIDE housing, COPPER ALLOY terminals, and NICKEL plating. With 10 switch sections and SPST function, it is ideal for OFF-ON applications. This slide DIP switch has a max DC voltage of 24V and operates b/w -30°C to 85°C.
TDA08H0SB1R
Itt Cannon
TDA08H0SB1R by ITT Cannon is a slide DIP switch with 8 sections, SPST function, and gold-nickel terminal finish. It has an electrical life of 1000 cycles and operates b/w -20°C to 85°C. Ideal for applications requiring surface mount straight mounting in electronic devices.
90HBW06PT
The Grayhill 90HBW06PT is a DIP switch with 6 sections, SPST function, and gold plating. It has a max DC contact voltage of 6V and operates b/w -40 to 85°C. Ideal for applications requiring reliable switching in compact spaces.
219-8MSTJRF
Cts
The Cts 219-8MSTJRF is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 8 sections, SPST function, and operates b/w -55 to 85 °C. Ideal for OFF-ON applications with 2000 cycles durability at 0.1A@20VDC rating.
CHS-04TB1
Nidec Copal Electronics
Nidec Copal Electronics' CHS-04TB1 is a 4-section SPST slide DIP switch with gold-plated contacts, suitable for applications requiring a max DC contact voltage of 6V and current of 0.1A. With a reflow solderable housing made of polyphenylene sulphide, it offers an electrical life of 2000 cycles and insulation resistance of 1G ohm, making it ideal for surface mount straight mounting in various electronic devices.
A6S-8101-PH
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; End Contact Plating: GOLD; Body Height: 3 mm; null: FLAT TYPE; null: 500VAC;
1-1571999-4
TE Connectivity's 1-1571999-4 is a white DIP & SIP switch with a polyphenylene sulphide housing material. It has a max operating temperature of 85°C and can handle a max AC contact current of 1A. This piano dip switch is suitable for panel mounting and has a latched switch action.
DS01-254-L-01BE
Cui
Cui DS01-254-L-01BE is a SPST slide DIP switch with 2000 cycles electrical life. It features white actuator, polybutylene terephthalate housing, and copper alloy terminals. Ideal for applications requiring latched switch action, it has a max DC contact voltage of 24V and operates b/w -40 to 85°C.
SDA03H1SBDR
C & K Components
SDA03H1SBDR by C & K Components is a DIP switch with 3 sections, SPST function, and gold plating. Made of polyphenylene sulphide, it has an electrical life of 1000 cycles and insulation resistance of 100M ohm. Ideal for applications requiring ON-OFF contact function in environments ranging from -40°C to 85°C.
78HJ03GWRT
Grayhill's 78HJ03GWRT is a SPDT slide DIP switch with 3 sections, offering 2000 cycles electrical life. With a max DC contact voltage of 30V and current of 0.15A, it is ideal for applications requiring latched switch action in temperatures ranging from -40 to 85°C.
A6S-5102
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: LATCHED; Maximum DC Contact Current: .025 A; null: 500VAC; Maximum Operating Temperature: 70 Cel;
GDH06S04
TE Connectivity's GDH06S04 DIP switch features 6 sections, SPST function, and gold over nickel plating. With a body width of 6.2mm and height of 2.21mm, it is ideal for applications requiring a latched switch action in temperatures ranging from -30 to 85°C. The switch has a max DC contact current of 0.1A and insulation resistance of 100MΩ, making it suitable for various electronic devices.
218-6LPSTJF
Cts 218-6LPSTJF is a SPST slide DIP switch with 6 sections, gold flash terminal finish, and latched switch action. It has a body width of 5.8", height of 2.7mm, and operates b/w -55 to 85°C. Ideal for applications requiring surface mount straight mounting in anti-static tube packaging.
EDS08SNRNTR04Q
TE Connectivity's EDS08SNRNTR04Q is a Slide DIP Switch with 8 sections, SPST function, and GOLD OVER NICKEL plating. Made of NYLON, it has a body height of 3.45mm and operates b/w -20 to 85 °C. Ideal for PANEL MOUNT applications with 0.025A AC/DC contact current at 24V max voltage.
A6HF-4102-PM
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Minimum Operating Temperature: -30 Cel; Maximum DC Contact Voltage: 24 V; Body Width: 6.2 inch; Packing Method: TAPE AND REEL;
219-2LPSTR
219-2LPSTR by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 2000 cycles electrical life, 1000000000 ohm insulation resistance, and operates b/w -55 to 85 °C. Ideal for ON-OFF applications in electronics requiring a compact SLIDE DIP SWITCH with SOLDER termination.
204-123ST
204-123ST by Cts is a DIP & SIP switch with a body width of 10.41in and a body height of 9.12mm. It has three switch sections and a SPDT switch function, making it suitable for various applications requiring slide dip switches.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved