Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Crydom D2450-B is a SINGLE solid state relay with a control current of 0.0034 A and max isolation voltage of 4000 V. It features trigger output SSR optoelectronic type, back to back SCR output circuit, and can handle up to 50 A on-state current. Ideal for DC input applications in various industries due to its compact size (22.9 mm height, 58.4 mm length) and wide operating temperature range (-40°C to 80°C).
Median Price
$76.660
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Master Electronics
1+ parts
$71.410
100+ parts
$58.920
1k+ parts
-
10k+ parts
TTI
$72.420
$70.160
Sager
$73.710
$67.730
RS Americas
$75.080
$67.570
Mouser Electronics
$71.600
DigiKey
$83.530
$73.701
RS (Exports)
$85.200
$76.680
Verical
$89.599
$72.122
Newark
$137.730
$112.050
$105.630
TodayComponents
$63.280
$57.200
Nova Conductors
$67.070
Electro Sonic
$85.760
$64.790
$63.150
IBS Electronics
$100.489
$82.215
Vyrian
Resion
A2Z Electronics, Inc.
Aztec Data Supply Inc.
$0.234
Continental Prestige Electronics
$65.729
Netroflash
$63.716
$62.375
Allen Electronics Distributors
Neutron USA
$144.990
Argo Parts USA
Assy Fe
Perfect Parts
Single configuration makes the product simple and easy to use, ideal for straightforward applications.
Low control current minimizes power consumption and reduces heat generation, making the product energy-efficient.
Optical triggering provides fast response times and high reliability for precise control.
Back to back SCR configuration ensures robust and reliable operation for switching high currents.
High maximum operating temperature allows the product to perform reliably in a wide range of environmental conditions.
Compact height enables easy integration of the product into various systems with limited space.
Low minimum operating temperature ensures the product can function in extreme cold conditions.
Tin terminal finish provides good conductivity and corrosion resistance for long-lasting performance.
Low control voltage requirement simplifies the interface with control systems and reduces the need for external components.
High isolation voltage ensures safe operation and protects sensitive electronics from power surges.
DC input compatibility makes the product suitable for a wide range of DC control applications.
Optimal length provides a balance between compact size and easy handling during installation.
High maximum on-state current rating allows the product to switch heavy loads with ease, making it versatile for various applications.
Solid State Relays D2450-B attributes and parameters. Explore more Solid State Relays devices from Crydom
Additional Features:
Configuration:
Control Current:
Control Voltage:
Input Type:
Maximum Isolation Voltage:
JESD-609 Code:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Output Circuit Type:
Height:
Length:
Sub-Category:
Terminal Finish:
D2450-B Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.95.00
SB
Sensata, through the Crydom brand, continues to be the global leader in Solid State Switching technology for over 45 years, by offering the most extensive range of standard and custom solid state relays and contactors suitable for any load control application. Sensata | Crydom has a broad offer of Solid State Relays and Contactors in several different mounting styles, covering a wide range of voltage and current ratings. Our Solid State Relays can be used to control almost any type of load in demanding heating, lighting, motion and power control applications that can benefit from the many advantages that SSRs have over traditional electromechanical relays, such as extended life expectancy, faster switching speed, lack of acoustical noise, higher resistance to shock and vibration, among others.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
1552200168
Molex
WIRE AND CABLE;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
Fairchild Semiconductor
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
D2440D-10
Crydom
The Crydom D2440D-10 is a solid state relay with 2 separate elements, each with a built-in snubber. It has a max on-state current of 40A and isolation voltage of 4000V. Ideal for applications requiring trigger output SSRs in temperatures ranging from -40°C to 80°C.
CPC2030NTR
IXYS Corporation
TRANSISTOR OUTPUT SSR; Packing Method: TR; Configuration: SEPARATE, 2 ELEMENTS; Maximum Forward Current: .05 A; Maximum On State Resistance: 30 ohm; Maximum On State Current: .12 A;
SPF240D25R
Sensata Technologies
TRIGGER OUTPUT SSR; Additional Features: UL APPROVED; Maximum Isolation Voltage: 4000 V; Maximum On State Current: 10 A; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 80 Cel;
DS13-1002
TE Connectivity
TE Connectivity's DS13-1002 is a TRANSISTOR OUTPUT SSR with max supply voltage of 32V and max forward current of 0.015A. With a max on state current of 1A, it is ideal for applications requiring solid state relays in industrial automation systems.
MCX480D5R
TRIGGER OUTPUT SSR; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Maximum Isolation Voltage: 4000 V; Additional Features: UL RECOGNIZED; Length: 43.1 mm; Height: 25.4 mm;
PFE240D25
Hbcontrols
TRIGGER OUTPUT SSR; Additional Features: ZEROVOLTAGECROSSING,ULRECOGNIZED,VDEAPPROVED; Minimum Operating Temperature: -30 Cel; No. of Elements: 1; Maximum Isolation Voltage: 4000 V; Maximum On State Current: 25 A;
D53TP50D
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Control Current: .019 A; Output Circuit Type: SCR; Additional Features: UL RECOGNIZED; Height: 30 mm;
CPC1777J
Ixys Integrated Circuits Division
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Additional Features: UL RECOGNIZED; JESD-609 Code: e3; Maximum Forward Current: .05 A;
PVT322PBF
International Rectifier
TRANSISTOR OUTPUT SSR; Terminal Finish: MATTE TIN; Maximum Isolation Voltage: 4000 V; JESD-609 Code: e3; Height: 3.4 mm; Configuration: SEPARATE, 2 ELEMENTS;
A2410
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Maximum On State Current: 10 A; Control Current: .005 A; Configuration: SINGLE; Height: 22.6 mm;
CPC1018N
Littelfuse
CPC1018N by Littelfuse is a single solid state relay with a control current of 0.0002 A and max forward current of 0.05 A. Featuring a MOSFET output circuit type, it operates b/w -40 to 85°C and offers an isolation voltage of 1500 V. Ideal for DC input applications, this SSR has a compact height of 2.03 mm and length of 4.089 mm, suitable for surface mount installations in various electronic systems.
G3VM-61VR(TR05)
Omron
Omron's G3VM-61VR(TR05) is a solid state relay with max. forward current of 0.025A, MOSFET output circuit type, and max. on-state current of 1.4A. Ideal for applications requiring high isolation voltage (3750V), surface mounting feature, and temp range from -20°C to 100°C.
CPC1025N
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Additional Features: CMOS COMPATIBLE, HIGH RELIABILITY, UL RECOGNIZED; Maximum Isolation Voltage: 1500 V; No. of Elements: 1; JESD-609 Code: e3;
AQY210EHAZ
Panasonic
Panasonic AQY210EHAZ is a SINGLE Solid State Relay with 0.13 A Max On State Current and 25 ohm Max On State Resistance. Ideal for DC input applications, it features TRANSISTOR OUTPUT SSR Optoelectronic Type and MOSFET Output Circuit Type. Operating temperature ranges from -40 to 85 °C.
AQW210SX
AQW210SX by Panasonic is a solid state relay with separate configuration and 2 elements. It has a max forward current of 0.05 A and can operate in temperatures ranging from -40 to 85 °C. This relay is commonly used for optoelectronic applications due to its transistor output SSR design.
CPC2030NTR by Littelfuse is a Solid State Relay with 2 separate elements, max. forward current of 0.05A, and transistor output SSR type. Operating temp: -40 to 85°C. Ideal for applications requiring high isolation voltage (1500V), low on-state resistance (30Ω), and max on-state current of 0.12A in compact TR packaging.
MP240D4
TRANSISTOR OUTPUT SSR; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Maximum Operating Temperature: 80 Cel; Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum On State Current: 4 A; Input Type: DC;
AQY212GHA
AQY212GHA by Panasonic is a SINGLE Solid State Relay with Control Current of 1.1A and Max Forward Current of 0.01A. It features MOSFET Output Circuit Type, operates b/w -40 to 85°C, and offers max Isolation Voltage of 5000V. Ideal for applications requiring AC/DC Input Type in compact spaces due to its small Height (2.9mm) and Length (6.4mm).
VO1400AEFTR
Vishay Intertechnology
VO1400AEFTR by Vishay Intertechnology is a SINGLE MOSFET SSR with 0.0003 A control current, 0.05 A max forward current, and 5 ohm max on-state resistance. Ideal for DC input applications requiring high isolation voltage of 3750 V, operating b/w -40 to 85 °C in compact spaces due to its 2.3 mm height and 4.7 mm length.
AQY212GS
AQY212GS by Panasonic is a single solid state relay with a control current of 0.03 A and max forward current of 1 A. It features a MOSFET output circuit type, operates b/w -40 to 85°C, and has an isolation voltage of 1500 V. Ideal for applications requiring AC/DC input types in compact spaces due to its surface mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
D2450
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Maximum Operating Temperature: 80 Cel; Maximum Isolation Voltage: 4000 V; Minimum Operating Temperature: -40 Cel; Additional Features: IEC-61000-4-2, 4-4, 4-5; IEC-62314, IEC-60068-2-6, 2-27, UL RECOGNIZED;
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; No. of Elements: 1; Maximum Isolation Voltage: 4000 V; Maximum Forward Current: .012 A; Length: 57.3 mm;
The Crydom D2450 is a solid state relay with a complex configuration and trigger output. It has a max on-state current of 50A, control voltage of 3V, and isolation voltage of 4000V. Ideal for DC input applications requiring high current switching in industrial settings.
D2450-10
TRIGGER OUTPUT SSR; Output Circuit Type: Back to Back SCR; Maximum Operating Temperature: 80 Cel; Control Voltage: 3 V; Maximum Isolation Voltage: 4000 V; Control Current: .0034 A;
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Maximum On State Current: 50 A; Maximum Operating Temperature: 80 Cel; Height: 22.6 mm; Minimum Operating Temperature: -40 Cel;
TRIGGER OUTPUT SSR; No. of Elements: 1; Configuration: COMPLEX; Maximum Forward Current: .012 A; Control Voltage: 3 V; Minimum Operating Temperature: -40 Cel;
D2450-B
TRIGGER OUTPUT SSR; Terminal Finish: Tin (Sn); Input Type: DC; No. of Elements: 1; Additional Features: UL RECOGNIZED, VDE APPROVED; Output Circuit Type: Back to Back SCR;
TRIGGER OUTPUT SSR; Terminal Finish: Tin (Sn); Maximum Operating Temperature: 80 Cel; Additional Features: UL RECOGNIZED, VDE APPROVED; JESD-609 Code: e3; Input Type: DC;
D2450K
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Maximum On State Current: 50 A; Maximum Operating Temperature: 80 Cel; Control Voltage: 3 V; Control Current: .007 A;
TRIGGER OUTPUT SSR; Configuration: COMPLEX; Maximum Forward Current: .012 A; No. of Elements: 1; Maximum On State Current: 50 A; Additional Features: UL APPROVED, VDE APPROVED;
D2450PG
TRIGGER OUTPUT SSR; Length: 58.4 mm; No. of Elements: 1; Configuration: COMPLEX; Control Current: .0034 A; Control Voltage: 3 V;
TRIGGER OUTPUT SSR; Input Type: DC; Length: 58.4 mm; Minimum Operating Temperature: -40 Cel; Maximum On State Current: 50 A; No. of Elements: 1;
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Maximum Isolation Voltage: 4000 V; Maximum Operating Temperature: 80 Cel; Maximum Forward Current: .012 A; Input Type: DC;
D2450FH-B
TRIGGER OUTPUT SSR; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Maximum On State Current: 50 A; Additional Features: UL RECOGNIZED; Input Type: DC;
D2450FPGH-B
TRIGGER OUTPUT SSR; Output Circuit Type: Back to Back SCR; Minimum Operating Temperature: -40 Cel; Control Current: .0034 A; Configuration: SINGLE WITH BUILT-IN SNUBBER AND LED DISPLAY; No. of Elements: 1;
D2450FPGH
TRIGGER OUTPUT SSR; Input Type: DC; Configuration: COMPLEX; Maximum Forward Current: .012 A; No. of Elements: 1; Control Voltage: 3 V;
D2450FGH
TRIGGER OUTPUT SSR; Configuration: COMPLEX; Control Voltage: 3 V; Control Current: .0034 A; Output Circuit Type: Back to Back SCR; Additional Features: UL APPROVED, VDE APPROVED;
D2450GH-10
TRIGGER OUTPUT SSR; Minimum Operating Temperature: -40 Cel; Additional Features: UL APPROVED, VDE APPROVED; Maximum Operating Temperature: 80 Cel; Length: 58.4 mm; No. of Elements: 1;
D2450P-10
TRIGGER OUTPUT SSR; Configuration: COMPLEX; Height: 22.9 mm; Maximum Isolation Voltage: 4000 V; Maximum Operating Temperature: 80 Cel; Length: 58.4 mm;
D2450FPH-B
TRIGGER OUTPUT SSR; Minimum Operating Temperature: -40 Cel; Maximum On State Current: 50 A; Length: 58.4 mm; Output Circuit Type: Back to Back SCR; Configuration: SINGLE WITH BUILT-IN SNUBBER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved