Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIGGER OUTPUT SSR; Minimum Operating Temperature: -40 Cel; Maximum On State Current: 25 A; Control Voltage: 18 V; Maximum Isolation Voltage: 4000 V; Output Circuit Type: Back to Back SCR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Solid State Relays CWA4825EH-10 attributes and parameters. Explore more Solid State Relays devices from Crydom
Additional Features:
Control Current:
Control Voltage:
Input Type:
Maximum Isolation Voltage:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Output Circuit Type:
Height:
Length:
Sub-Category:
CWA4825EH-10 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.95.00
SB
Sensata, through the Crydom brand, continues to be the global leader in Solid State Switching technology for over 45 years, by offering the most extensive range of standard and custom solid state relays and contactors suitable for any load control application. Sensata | Crydom has a broad offer of Solid State Relays and Contactors in several different mounting styles, covering a wide range of voltage and current ratings. Our Solid State Relays can be used to control almost any type of load in demanding heating, lighting, motion and power control applications that can benefit from the many advantages that SSRs have over traditional electromechanical relays, such as extended life expectancy, faster switching speed, lack of acoustical noise, higher resistance to shock and vibration, among others.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
STM32F407VGT6
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
STM32H743XIH6
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
DRA1-CX240D5
Sensata Technologies
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Maximum Isolation Voltage: 4000 V; Additional Features: IEC-62314, UL RECOGNIZED; Control Voltage: 3 V; Length: 89.6 mm;
AQY214SX
Aromat
Solid State Relays; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Height: 2.1 mm; Length: 4.4 mm; Maximum Operating Temperature: 85 Cel;
G3VM-61E1
Omron
Omron's G3VM-61E1 is a single solid state relay with built-in diode, featuring 5A control current and 0.05A max forward current. Ideal for DC input applications, it offers MOSFET output circuit type, 2 ohm max on-state resistance, and 2500V isolation voltage.
LCC120S
IXYS Corporation
TRANSISTOR OUTPUT SSR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE WITH OPTOCOUPLER TRANSISTOR OUTPUT; Maximum Isolation Voltage: 3750 V; Maximum Forward Current: .17 A;
TLP3555A(TP1,F(O
Toshiba
Toshiba's TLP3555A(TP1,F(O is a single solid state relay with a control current of 0.0195 A and max forward current of 0.03 A. Featuring a MOSFET output circuit type, it operates b/w -40 to 85°C, making it suitable for DC input applications requiring up to 3A on-state current.
CPC1018NTR
TRANSISTOR OUTPUT SSR; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .05 A; Maximum Isolation Voltage: 1500 V; Configuration: SINGLE;
CPC1779J
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum On State Current: 1.65 A; Maximum Forward Current: .1 A; Maximum Operating Temperature: 85 Cel;
AQW212AX
Panasonic
The Panasonic AQW212AX is a solid state relay with 2 separate elements, max. forward current of 0.05A, and transistor output SSR type. It operates b/w -40°C to 85°C, has max. on-state resistance of 2.5 ohm, isolation voltage of 1500V, and max. on-state current of 0.6A. Ideal for applications requiring reliable switching in industrial automation systems.
MCXE240D5
Crydom
Crydom's MCXE240D5 is a solid state relay with 0.015 A control current and 5 A max on-state current. Featuring trigger output SSR optoelectronics, it operates at temperatures from -40 to 80 °C. Ideal for DC input applications requiring high isolation voltage up to 4000 V, with compact dimensions of 25.4 mm height and 43.1 mm length.
OACM-5H
TE Connectivity
TE Connectivity's OACM-5H is a solid state relay with 0.02 A control current, 8 V max supply voltage, and 280 V max output voltage. Ideal for panel mounting applications, this TRIGGER OUTPUT SSR operates b/w -30 to 80 °C and offers 4000 V isolation voltage.
AQV216S
AQV216S by Panasonic is a solid state relay with a control current of 0.0007 A and max forward current of 0.05 A, ideal for applications requiring low power switching. With an optoelectronic type of transistor output SSR and MOSFET output circuit type, it offers high isolation voltage of 1500 V making it suitable for AC/DC input types in various electronic devices. Measuring at just 2.1 mm in height and 6.3 mm in length, this surface mount relay operates efficiently within a wide temperature range from -40 to 85 °C.
CPC1114N
TRANSISTOR OUTPUT SSR; Length: 4.1 mm; Control Current: .00058 A; Height: 2.18 mm; Control Voltage: .9 V; Input Type: DC;
PVT422SPBF
Infineon Technologies
PVT422SPBF by Infineon Technologies is a solid state relay with separate configuration, 2 elements, and MOSFET output circuit type. It has a max forward current of 0.025 A and max on-state resistance of 35 ohm. Ideal for DC input applications in industrial automation due to its high isolation voltage of 4000 V and compact size (9.4mm x 3.42mm).
A1225
TRIGGER OUTPUT SSR; Terminal Finish: Tin (Sn); Height: 22.9 mm; Configuration: SINGLE WITH BUILT-IN RESISTOR; Maximum Forward Current: .004 A; Control Current: .002 A;
CPC2014NTR
TRANSISTOR OUTPUT SSR; Maximum On State Current: .4 A; Packing Method: TR; Configuration: SEPARATE, 2 ELEMENTS; Maximum Forward Current: .05 A; Additional Features: CMOS COMPATIBLE, UL RECOGNIZED;
SPFE240D25
TRIGGER OUTPUT SSR; Maximum Isolation Voltage: 4000 V; Minimum Operating Temperature: -30 Cel; No. of Elements: 1; Maximum Operating Temperature: 80 Cel; Additional Features: UL APPROVED;
CX240D5
The Crydom CX240D5 is a single solid state relay with trigger output SSR. It has a control current of 0.015 A and max isolation voltage of 4000 V, making it ideal for DC input applications requiring up to 5 A on-state current. With a compact height of 25 mm and length of 43 mm, it operates b/w -30°C to 80°C temperature range.
LH1546AEFTR
Vishay Semiconductors
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .05 A; Additional Features: UL RECOGNIZED, HIGH RELIABILITY; Maximum On State Current: .12 A; No. of Elements: 1;
CPC1983Y
Littelfuse
CPC1983Y by Littelfuse is a single solid state relay with a max forward current of 0.05A and on-state resistance of 6 ohm. It features a transistor output SSR optoelectronic type, operates b/w -40 to 85 °C, and offers an isolation voltage of 2500V. Ideal for applications requiring reliable switching in industrial automation systems.
SSR240A50
Potter & Brumfield
Potter & Brumfield SSR240A50 is a Solid State Relay with Back to Back SCR output circuit. It operates b/w -30°C to 80°C, with a control voltage of 90V AC. Ideal for applications requiring reliable switching in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved