Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
Median Price
$0.210
Lifecycle Status
Suppliers In-Stock
58
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.090
100+ parts
-
1k+ parts
10k+ parts
Adafruit Industries
$0.247
$0.235
Newark
$0.474
$0.199
$0.158
RS (Exports)
$0.500
$0.391
Bürklin Elektronik
$0.540
$0.244
$0.174
Distrelec
$0.542
$0.195
$0.163
TTI
$0.172
Verical
$0.116
Arrow
TTI Europe
Elektronika Sales Private Limited
Farnell
$0.142
$0.112
Element14
$0.332
$0.250
Chip1Stop
Mobius Materials
$0.167
$0.133
Ozdisan Elektronik
$0.205
Maritex
$0.220
Nova Conductors
$0.245
TME
$0.380
$0.126
$0.119
Component Electronics Inc.
$0.290
Bristol Electronics
$0.450
$0.225
$0.056
Velocity Electronics
NAC Semi
$0.400
Vyrian
R&J Components
Chip Stock
LWI Electronics Inc
Mil-Aero Solutions, Inc.
LIBRA Elektronik GmbH
Rutronik
$0.118
Semi Source
Contempo Components LLC
QIE Inc.
Martec Srl
Dan-Mar Components
Cyclops Electronics Ltd
Schukat
$0.173
$0.137
$0.114
Pegasus Components GmbH
Sinequanon
HZD GmbH
ComSIT Distribution GmbH
Sea View Technologies
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Component Sense
Sensible Micro Corp
NPI Materials, Inc.
Prism Electronics
Global Solutions Electronics Company
ACDS - Activité Composants Distribution Service
PC Components Company LLC
Flex Direct, LLC
Atlantic Semiconductor
Rapid Electronics
$0.328
AGACORP
Resion
Diverse Electronics
Connector Distribution Corp
Right Parts Inc.
Ampacity Inc.
$0.071
Semicontronic
$0.069
Modulus Dynamics
$0.218
Argo Parts USA
$0.236
$0.229
Netroflash
Advanced Electronics
Corohmni
$0.425
Aztec Data Supply Inc.
$0.428
Perfect Parts
Allen Electronics Distributors
$1.481
GreenTree Electronics
Glotronic Ltd.
Authorized Procurement Solutions
Robosynatics
$0.221
$0.216
Lucentia Tech
Futuretech Components
Continental Prestige Electronics
$0.160
$0.113
Cyclops Electronics Ltd (Excess)
Kepictronics
Assy Fe
Akira Global LLC
Fixed Capacitors T491B105K035AT attributes and parameters. Explore more Fixed Capacitors devices from Cornell Dubilier Electronics
Capacitance:
Capacitor Type:
Custom Capabilities:
Dielectric Material:
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Manufacturer Series:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Series:
Size Code:
Tan Delta:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
T491B105K035AT Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
Whether you need help with a standard product or a custom design, our engineers are always on call to provide you with CDE application guides, life calculators and technical support you need to arrive at the most optimal solution. Rest assured, we will draw on our years of experience gained from building capacitors for a wide range of applications to provide you with expert technical assistance.
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
ATMEGA328P-AU
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
General Semiconductor
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
562R10TSD10
Vishay Intertechnology
Vishay Intertechnology's 562R10TSD10 is a ceramic capacitor with 0.001 uF capacitance and 1000 V rated DC voltage. With a temperature coefficient of 7.5% and -55 to 105 °C operating range, it suits applications requiring stable performance in varying conditions. The radial package style and matte tin over nickel finish make it ideal for through hole mounting in electronic circuits.
C0805C104K5RACAUTO
KEMET Corporation
KEMET C0805C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and -55 to 125°C operating range. Ideal for automotive applications meeting AEC-Q200 standard, it features SMT package style and wraparound terminals.
GRM188R60J226MEA0D
Murata Manufacturing
Murata Manufacturing's GRM188R60J226MEA0D is a ceramic capacitor with 22uF capacitance and 6.3V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
C0603C220J5GACTU
KEMET Corporation's C0603C220J5GACTU is a ceramic capacitor with 0.000022 uF capacitance and 50V URdc. Featuring C0G temperature characteristics, it operates b/w -55 to 125 °C with ±5% tolerance. Ideal for surface mount applications requiring compact size and high reliability in various electronic circuits.
UCD1H221MNL1GS
Nichicon
Nichicon UCD1H221MNL1GS is a 220uF aluminum electrolytic capacitor with 50V URdc. It has low tan delta of 0.10 and leakage current of 0.11mA, suitable for AEC-Q200 applications in automotive electronics due to its high ripple current rating of 350mA.
LMK107BBJ106MALT
Taiyo Yuden
Taiyo Yuden's LMK107BBJ106MALT is a ceramic capacitor with 10uF capacitance and 10V URdc. It has X5R temperature characteristics, -55 to 85 °C operating range, and 15% temp coef. Ideal for SMT applications due to its compact 0.8x.8x1.6mm size and wraparound terminals for efficient surface mounting.
C0603C102K5RACAUTO
C0603C102K5RACAUTO by KEMET is a ceramic capacitor with 10% negative tolerance, X7R temperature characteristics, and 0.001 uF capacitance. It is ideal for automotive applications due to its AEC-Q200 standard compliance and 50V rated DC voltage. With SMT package style and compact dimensions of 1.6mm x 0.8mm x 0.8mm, it is suitable for surface mounting in tight spaces.
EEEHB1H4R7R
Panasonic
Panasonic EEEHB1H4R7R is a 4.7uF aluminum electrolytic capacitor with 50V URdc, suitable for surface mount applications. It offers low tan delta of 0.12 and leakage current of 0.003mA, making it ideal for high ripple current (23mA) environments in automotive electronics adhering to AEC-Q200 standards.
GRM155R71A104KA01D
Murata Manufacturing's GRM155R71A104KA01D is a ceramic capacitor with 0.1uF capacitance and 10V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact components with stable performance.
M39006/22-0565
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
M39006/22-0350
Vishay Intertechnology's M39006/22-0350 is a TANTALUM CAPACITOR with 47uF capacitance, 50V URdc, and 0.11 Tan Delta. Ideal for MIL-PRF-39006/22 applications, it operates b/w -55 to 125 °C with a leakage current of 0.001 mA.
M39006/22-0377
Exxelia Group
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
M39006/250143
Cornell Dubilier Electronics
M39006/250143 by Cornell Dubilier Electronics is a TANTALUM CAPACITOR with 330uF capacitance, 50V URdc, and 741mA ripple current. Ideal for MIL-C-39006/25 applications requiring -55 to 125 °C operating temperature range and polarized mounting via THROUGH HOLE MOUNT.
GCJ21BR71A106KE01L
Murata Manufacturing's GCJ21BR71A106KE01L is a ceramic capacitor with 10uF capacitance, X7R temperature characteristics, and 10% tolerance. It operates b/w -55 to 125 °C and has a rated DC voltage of 10V. Ideal for automotive applications meeting AEC-Q200 standard.
EEEHD1V4R7AR
Panasonic EEEHD1V4R7AR is a 4.7uF aluminum electrolytic capacitor with 35V URdc. It features tan delta of 0.13, leakage current of 0.003mA, and ripple current of 17mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -40°C to 105°C.
C1210C107M8PACTU
KEMET C1210C107M8PACTU is a ceramic capacitor with 100uF capacitance, 10V rated DC voltage, and X5R temperature characteristics. Ideal for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 85°C. Features rectangular package shape, multi-layer design, and matte tin over nickel terminal finish.
564R60GAD22
Vishay Intertechnology's 564R60GAD22 is a ceramic capacitor with capacitance of 0.0022 uF and rated DC voltage of 6000 V. With negative tolerance of 20%, it operates b/w -25 to 105 °C, making it suitable for various fixed capacitor applications. Featuring radial package style, matte tin terminal finish, and through hole mount, this component offers reliable performance in electronic circuits.
BFC237036473
Vishay Intertechnology BFC237036473 is a 0.047uF film capacitor with 250V DC and 160V AC ratings. Featuring polyester dielectric, it has a rectangular package for through-hole mounting applications. With AEC-Q200 and IEC60384-2 compliance, it operates b/w -55°C to 105°C making it suitable for various electronic circuits.
M39006/30-0040
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 850 uF; Rated DC Voltage (URdc): 8 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
T491A105K016AT
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
KEMET Corporation's T491A105K016AT is a 1uF Tantalum Capacitor with 16V URdc. It features Tan Delta of 0.04, Leakage Current of 0.0005mA, and Ripple Current of 35mA. Ideal for applications requiring compact SMT capacitors with high ESR and low leakage current in a wide temperature range from -55 to 125°C.
T491A106K016AT
KEMET T491A106K016AT is a 10uF, 16V Tantalum Capacitor with low Tan Delta of 0.06 and high Ripple Current of 63mA. Ideal for applications requiring compact SMT capacitors with high reliability and low leakage current.
T491A106K010AT
T491A106K010AT by KEMET is a 10uF TANTALUM CAPACITOR with a rated DC voltage of 10V. It has a low Tan Delta of 0.06 and leakage current of 0.001mA, making it suitable for applications requiring high reliability and stability in a compact size.
T491C106K025AT
KEMET T491C106K025AT is a 10uF, 25V Tantalum Capacitor with low Tan Delta of 0.06 and high Ripple Current of 108mA. Ideal for surface mount applications in electronics requiring stable capacitance at temperatures ranging from -55 to 125°C.
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T491B106K016AT
KEMET T491B106K016AT is a 10uF, 16V tantalum capacitor with low Tan Delta of 0.06 and high ripple current of 82mA. Ideal for applications requiring compact SMT components with high reliability in temperatures ranging from -55 to 125°C.
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T491D106K035AT
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
KEMET T491D106K035AT is a 10uF, 35V Tantalum Capacitor with low Tan Delta of 0.06 and high Ripple Current of 155mA. Ideal for applications requiring compact SMT capacitors with high reliability and performance in a wide temperature range from -55°C to 125°C.
T491B226K016AT
KEMET Corporation's T491B226K016AT is a 22uF, 16V Tantalum Capacitor with low ESR of 2200mohm. Ideal for applications requiring high ripple current (79mA) and low leakage current (0.0035mA). SMT package style makes it suitable for surface mounting in various electronic devices.
T491X107K025AT
T491X107K025AT by KEMET: Tantalum capacitor with 100uF capacitance, 25V rated DC voltage, and 0.08 Tan Delta. Ideal for applications requiring high ripple current handling in compact SMT designs.
T491B476K010AT
KEMET Corporation's T491B476K010AT is a 47uF TANTALUM CAPACITOR with 10V URdc. It features Tan Delta of 0.08, Leakage Current of 0.0047mA, and Ripple Current of 117mA. Ideal for applications requiring compact SMT capacitors with high capacitance and low ESR like power supplies and consumer electronics.
T491D107K016AT
KEMET Corporation's T491D107K016AT is a TANTALUM CAPACITOR with 100uF capacitance, 16V URdc, and 0.08 Tan Delta. Ideal for applications requiring high ripple current handling up to 185mA, such as power supplies and voltage regulators in electronic devices.
T491D106K025AT
KEMET T491D106K025AT is a 10uF, 25V tantalum capacitor with low Tan Delta of 0.06 and ESR of 1000mohm. Ideal for applications requiring high ripple current (155mA) and operating temperatures from -55 to 125°C in SMT packages.
T491D106K050AT
KEMET T491D106K050AT is a 10uF, 50V tantalum capacitor with low Tan Delta of 0.06 and ESR of 800mohm. Ideal for applications requiring high ripple current (173mA) and operating temperatures from -55 to 125°C in surface mount designs.
T491B106K020AT
KEMET T491B106K020AT is a 10uF, 20V Tantalum Capacitor with low Tan Delta of 0.06 and high Ripple Current of 80mA. Ideal for applications requiring compact SMT capacitors with high reliability in temperatures ranging from -55 to 125°C.
T491A475K016AT
KEMET T491A475K016AT is a 4.7uF, 16V tantalum capacitor with low ESR of 4000mohm and tan delta of 0.06. Ideal for applications requiring high ripple current (55mA) in compact SMT designs with operating temperatures from -55 to 125°C.
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved