Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Fixed Capacitors NPA101M100ST attributes and parameters. Explore more Fixed Capacitors devices from Cornell Dubilier Electronics
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Leakage Current (mA):
Manufacturer Series:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Tan Delta:
Terminal Shape:
NPA101M100ST Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Whether you need help with a standard product or a custom design, our engineers are always on call to provide you with CDE application guides, life calculators and technical support you need to arrive at the most optimal solution. Rest assured, we will draw on our years of experience gained from building capacitors for a wide range of applications to provide you with expert technical assistance.
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Solid State Devices
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
Allegro MicroSystems
STM8S003F3P6TR
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
12061C103KAT2A
KYOCERA AVX
12061C103KAT2A by KYOCERA AVX is a ceramic capacitor with 0.01uF capacitance and 100V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
12065C223KAT2A
12065C223KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.022 uF capacitance and 50V URdc. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for applications requiring compact, high-performance capacitors in surface mount technology.
GCM31CR71H225KA55L
Murata Manufacturing
Murata Manufacturing's GCM31CR71H225KA55L is a ceramic capacitor with 2.2uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and compact size of 3.2x1.6x1.6mm.
C3216X5R1V226M160AC
TDK
TDK C3216X5R1V226M160AC is a SMT ceramic capacitor with 22uF capacitance, 35V URdc, and X5R temp. coef. Ideal for surface mount applications in electronics due to its compact size and high temp. rating of -55 to 85 °C.
12103D226MAT2A
12103D226MAT2A by KYOCERA AVX is a ceramic capacitor with a capacitance of 22 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 85 °C. This capacitor is commonly used in surface mount applications.
GRM033R60J105MEA2D
GRM033R60J105MEA2D by Murata is a ceramic capacitor with 1uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it's ideal for surface mount applications in electronics due to its compact size of 0.6mm x 0.3mm x 0.3mm.
EEEFK1H101P
Panasonic
Panasonic EEEFK1H101P is a 100uF Aluminum Electrolytic Capacitor with 50V URdc. It has a Tan Delta of 0.10 and Ripple Current of 262.5mA, suitable for automotive applications meeting AEC-Q200 standard. With -55 to 105 °C operating range, it's ideal for surface mount designs requiring compact cylindrical package.
GCM155R71E103KA37D
Murata Manufacturing's GCM155R71E103KA37D is a ceramic capacitor with 0.01uF capacitance, X7R temperature characteristics, and 25V rated DC voltage. It is used in surface mount applications for automotive electronics due to its AEC-Q200 compliance and compact 0402 size.
C1825C105KARACTU
KEMET Corporation
C1825C105KARACTU by KEMET Corp is a rectangular package ceramic capacitor with 1uF capacitance and 250V rated DC voltage. It has a temperature coefficient of 15% and can operate b/w -55°C to 125°C. This capacitor is commonly used in surface mount applications requiring high capacitance and voltage stability.
UMK212B7104KGHT
Taiyo Yuden
UMK212B7104KGHT by Taiyo Yuden is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It features X7R temperature characteristics and has a compact SMT package style suitable for surface mount applications. With a negative tolerance of 10%, it is ideal for use in automotive electronics meeting AEC-Q200 standards.
ECA2CM4R7
ECA2CM4R7 by Panasonic is a 4.7uF ALUMINUM ELECTROLYTIC CAPACITOR with 160V URdc. It features a Tan Delta of 0.16 and Ripple Current of 78mA, suitable for THROUGH HOLE MOUNT applications in electronics due to its POLARIZED nature and compact size (6.3mm diameter, 11.2mm length).
BFC237022104
Vishay Intertechnology
Vishay Intertechnology BFC237022104 is a film capacitor with 0.1uF capacitance, rated for 100V DC and 63V AC. With -55 to 105°C operating temperature range, it's ideal for automotive (AEC-Q200) and general electronic applications (IEC60384-2), featuring a rectangular package shape for through-hole mounting.
C0603C104K5RACAUTO7411
KEMET Corporation's C0603C104K5RACAUTO7411 is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for automotive applications due to AEC-Q200 standard compliance and compact SMT package design.
EEEFK1H470P
Panasonic EEEFK1H470P is a 47uF aluminum electrolytic capacitor with 50V URdc. It has a tan delta of 0.10 and leakage current of 0.0235mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -55°C to 105°C.
M39006/21-0159
Vishay Intertechnology's M39006/21-0159 is a TANTALUM CAPACITOR with 220uF capacitance, 75V URdc, and 0.37 Tan Delta. It is MIL-PRF-39006/21 compliant and suitable for applications requiring high reliability in harsh environments due to its wet tantalum construction. With a temperature range of -55°C to 125°C, it is ideal for military, aerospace, and industrial electronics.
CC1206KKX7RDBB102
Yageo
CC1206KKX7RDBB102 by Yageo is a ceramic capacitor with a capacitance of 0.001 uF and a rated DC voltage of 2000 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 125 °C. This fixed capacitor is commonly used in surface mount applications.
EEEFT1H470AP
Panasonic EEEFT1H470AP is a 47uF aluminum electrolytic capacitor with 50V URdc. It has low Tan Delta of 0.1 and high Ripple Current of 126.75mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and wide operating temperature range from -55°C to 105°C.
CC0402JRX7R8BB103
Yageo CC0402JRX7R8BB103 is a SMT ceramic capacitor with 0.01uF capacitance and 25V URdc. It has X7R temperature characteristics, -55 to 125°C operating range, and ±5% tolerance. Ideal for compact electronic devices requiring stable performance in harsh environments.
GRM21BR60J107ME15L
Murata Manufacturing's GRM21BR60J107ME15L is a ceramic capacitor with 100uF capacitance and 6.3V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
GRM188R60J106KE47D
Murata Manufacturing's GRM188R60J106KE47D is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55°C to 85°C, making it ideal for surface mount applications in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Cornell Dubilier Electronics
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved