Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AFK476M63F24T-F by Cornell Dubilier Electronics is a 47uF aluminum electrolytic capacitor with a rated DC voltage of 63V. It features a tan delta of 0.08, leakage current of 0.0296mA, and ripple current of 187.5mA, making it ideal for applications requiring high capacitance and reliability in harsh environments.
Median Price
$1.366
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
DigiKey
1+ parts
$2.010
100+ parts
$0.933
1k+ parts
-
10k+ parts
Mouser Electronics
$0.934
$0.721
$0.660
Verical
$0.610
$0.577
TTI
$0.636
Nova Conductors
$0.673
VNN
PUI
Bristol Electronics
Vyrian
Atlantic Semiconductor
Corohmni
$0.089
Aztec Data Supply Inc.
$0.130
Advanced Electronics
$0.260
$0.237
$0.213
Continental Prestige Electronics
$0.659
Argo Parts USA
$0.652
Authorized Procurement Solutions
Netroflash
$0.639
$0.625
Robosynatics
Lucentia Tech
$0.238
$0.220
Aluminum electrolytic capacitors are known for their high capacitance values, making this product suitable for applications that require high capacitance levels.
The high ripple current rating of 187.5 mA ensures that this capacitor can effectively filter out AC components from the DC power supply, making it ideal for use in power supply applications.
With a capacitance of 47 uF, this capacitor offers a moderate capacitance value suitable for various applications such as buffering, signal coupling, and filtering.
The high maximum operating temperature of 105°C ensures that this capacitor can withstand elevated temperatures, making it suitable for use in industrial and automotive applications.
The low ESR value of 650 mOhms indicates that this capacitor has low internal resistance, enabling it to deliver stable and efficient performance in high-frequency applications.
Fixed Capacitors AFK476M63F24T-F attributes and parameters. Explore more Fixed Capacitors devices from Cornell Dubilier Electronics
Additional Features:
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Reference Standard:
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
AFK476M63F24T-F Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.22.00.20
SB
Whether you need help with a standard product or a custom design, our engineers are always on call to provide you with CDE application guides, life calculators and technical support you need to arrive at the most optimal solution. Rest assured, we will draw on our years of experience gained from building capacitors for a wide range of applications to provide you with expert technical assistance.
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
C1210X475K5RACTU
KEMET Corporation
C1210X475K5RACTU by KEMET is a ceramic capacitor with 4.7uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
EEEHD1V221AP
Panasonic
Panasonic EEEHD1V221AP is a 220uF aluminum electrolytic capacitor with 35V rated DC voltage. It has low tan delta of 0.14 and leakage current of 0.077mA, suitable for automotive applications meeting AEC-Q200 standard. With compact SMT package style and cylindrical shape, it is ideal for surface mounting in tight spaces.
M39006/30-0040
Vishay Intertechnology
Vishay Intertechnology's M39006/30-0040 is a TANTALUM CAPACITOR with 850uF capacitance, 8V URdc, and 0.3 Tan Delta. Ideal for MIL-PRF-39006/30 applications requiring polarized capacitors with -55 to 125 °C operating range and low ESR of 470mohm in tubular package.
B32620A0682J000
TDK
The TDK B32620A0682J000 is a film capacitor with capacitance of 0.0068 uF and rated DC voltage of 1000 V. It has a max operating temperature of 105°C, making it suitable for high-temperature applications in industries like automotive and telecommunications. With a compact rectangular package design, it offers reliable performance in through-hole mounting configurations.
C0805C224K5RACTU
The KEMET C0805C224K5RACTU is a ceramic capacitor with capacitance of 0.22uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in various electronic circuits requiring stable capacitance at different temperatures.
C0805C474K4RACTU
The KEMET C0805C474K4RACTU is a ceramic capacitor with 0.47uF capacitance and 16V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for surface mount applications in various electronic circuits due to its compact rectangular package design.
EEEFK1H471AM
Panasonic EEEFK1H471AM is a 470uF Aluminum Electrolytic Capacitor with 50V URdc. It features Tan Delta of 0.12, Leakage Current of 0.235mA, and Ripple Current of 1207.5mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance.
C0805C106K8RACTU
KEMET C0805C106K8RACTU is a ceramic capacitor with 10uF capacitance and 10% tolerance. It operates b/w -55 to 125°C, suitable for SMT mounting in various electronic applications requiring stable performance at different temperatures. The rectangular package with matte tin finish makes it ideal for compact designs.
M39006/22-0360
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 160 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
T491D106K035AT
KEMET T491D106K035AT is a 10uF, 35V Tantalum Capacitor with low Tan Delta of 0.06 and high Ripple Current of 155mA. Ideal for applications requiring compact SMT capacitors with high reliability and performance in a wide temperature range from -55°C to 125°C.
CC0603KRX7R7BB105
Yageo's CC0603KRX7R7BB105 is a 1uF ceramic capacitor with X7R temperature characteristics, suitable for a wide temperature range from -55 to 125°C. It has a 16V rated DC voltage and ±10% tolerance, making it ideal for various applications requiring stable capacitance values in compact SMT designs. The rectangular package measures 1.6mm x 0.8mm x 0.8mm, featuring wraparound terminals with matte tin finish for easy surface mounting.
T491A106K010AT7280
KEMET T491A106K010AT7280 is a 10uF, 10V tantalum capacitor with low tan delta of 0.06 and high ESR of 3800 mohm. Ideal for applications requiring compact SMT capacitors with polarized terminals in a rectangular package, operating b/w -55 to 125 °C for power supply filtering and decoupling circuits.
EEEFK1C101P
Panasonic EEEFK1C101P is a 100uF aluminum electrolytic capacitor with 16V rated DC voltage. It has tan delta of 0.16 and leakage current of 0.016mA, suitable for AEC-Q200 standard automotive applications due to its compact SMT package style and high ripple current handling capability of 180mA.
M39006/22-0565
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C0402C104J4RACTU
KEMET C0402C104J4RACTU is a ceramic capacitor with 0.1uF capacitance, rated at 16V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±5% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
M39006/25-0236
KYOCERA AVX
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CL31B105KBHNNNE
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B105KBHNNNE is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
UCL1V101MCL6GS
Nichicon
Nichicon UCL1V101MCL6GS is a 100uF, 35V aluminum electrolytic capacitor with 0.12 Tan Delta and 0.035mA Leakage Current. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and -55 to 105°C operating temperature range.
C1206C104K5RACTU
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
GRM1555C1H101JA01D
Murata Manufacturing
GRM1555C1H101JA01D by Murata is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance in a wide temperature range. With SMT package style, it is ideal for compact electronic devices needing high-quality capacitors.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AFK475M50B12T-F
Cornell Dubilier Electronics
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
AFK476M50X16T-F
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
AFK477M25G24T-F
AFK477M25G24T-F by Cornell Dubilier Electronics is a 470uF aluminum electrolytic capacitor with 25V rated DC voltage. It features tan delta of 0.14, leakage current of 0.1175mA, and ripple current of 637.5mA. Ideal for applications requiring high capacitance in compact SMT packages with operating temperatures from -55°C to 105°C.
AFK476M2AH32T-F
AFK476M2AH32T-F by Cornell Dubilier Electronics is a 47uF aluminum electrolytic capacitor with 100V rated DC voltage. It features tan delta of 0.07, leakage current of 0.047mA, and ripple current of 375mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -55°C to 105°C.
AFK476M80G24T-F
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 80 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
AFK477M63P44T-F
AFK477M63P44T-F by Cornell Dubilier: Aluminum electrolytic capacitor with 470uF capacitance, 63V rated DC voltage, and 105°C max operating temp. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and low ESR of 82mohm.
AFK476M63F24B-F
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 63 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
AFK476M80G24B-F
AFK476M63F24T
AFK476M63F24B
AFK476M06B12T-F
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
AFK476M06C12T-F
AFK476M16C12T-F
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
AFK476M16D16T-F
AFK476M25D16T-F
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
AFK476M35D16T-F
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
AFK476M50E16T-F
AFK476M63FB-F
AFK476M63F24VT-F
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved