Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
381LX681M160J022 by Cornell Dubilier Electronics is a 680uF, 160V aluminum electrolytic capacitor with a leakage current of 0.98955mA and ripple current of 1700mA. It is polarized, has a diameter of 25mm, and operates b/w -40 to 105°C. Ideal for applications requiring high capacitance and voltage stability in through-hole mounting configurations.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Nova Conductors
AZTECH Wire
$17.570
Authorized Procurement Solutions
Continental Prestige Electronics
Argo Parts USA
Aranea Global
The use of aluminum as the dielectric material ensures high capacitance levels and reliable performance, making this capacitor a good choice for applications requiring stable and long-lasting capacitance.
The low leakage current of 0.98955 mA indicates minimal loss of charge over time, resulting in efficient and reliable operation of the capacitor in various electronic circuits.
The cylindrical package shape allows for easy installation and space-efficient design, making it suitable for applications where compact size is important.
The high ripple current of 1700 mA indicates that the capacitor can handle fluctuations in current effectively, making it a reliable choice for applications with varying load conditions.
With 2 terminals, this capacitor is easy to connect in circuits and provides a simple and straightforward design for installation.
The snap-in terminal shape allows for quick and secure connection, ensuring easy and efficient installation of the capacitor in electronic devices.
The high maximum operating temperature of 105 °C enables this capacitor to withstand elevated temperatures, making it suitable for applications where heat dissipation is a concern.
With a capacitance of 680 uF, this capacitor offers high charge storage capacity, making it suitable for applications requiring large amounts of stored energy.
The high rated DC voltage of 160 V ensures that this capacitor can handle high voltage levels, making it a reliable choice for various electronic circuits and systems.
Fixed Capacitors 381LX681M160J022 attributes and parameters. Explore more Fixed Capacitors devices from Cornell Dubilier Electronics
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
JESD-609 Code:
Leakage Current (mA):
Length:
Manufacturer Series:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Series:
Terminal Finish:
Terminal Pitch:
Terminal Shape:
381LX681M160J022 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.22.00.40
SB
Whether you need help with a standard product or a custom design, our engineers are always on call to provide you with CDE application guides, life calculators and technical support you need to arrive at the most optimal solution. Rest assured, we will draw on our years of experience gained from building capacitors for a wide range of applications to provide you with expert technical assistance.
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
C1210C104K5RACTU
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Goodwork Semiconductor
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CL21A106KPFNNNE
Samsung Electro-mechanics
Samsung Electro-mechanics' CL21A106KPFNNNE is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for surface mount applications requiring compact size and high reliability.
12063D106KAT2A
KYOCERA AVX
12063D106KAT2A by KYOCERA AVX is a ceramic capacitor with 10uF capacitance, 25V URdc, and X5R temp characteristics. Ideal for SMT applications due to its compact size and surface mounting feature. Suitable for use in electronic devices requiring stable performance in a wide temperature range.
CC0603KRX7R8BB104
Yageo
Yageo CC0603KRX7R8BB104 is a SMT ceramic capacitor with 0.1uF capacitance, 25V URdc, X7R temp code. Ideal for applications requiring compact design and high reliability in temperatures ranging from -55 to 125°C. Features include negative tolerance of 10%, multi-layer construction, and matte tin terminal finish.
CL05B102KB5NNNC
CL05B102KB5NNNC by Samsung Electro-mechanics is a ceramic capacitor with 0.001uF capacitance and 50V URdc. With X7R temp characteristics, it operates from -55 to 125 °C, making it ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
C2012X7R1V475K125AC
TDK
TDK C2012X7R1V475K125AC is a SMT ceramic capacitor with 4.7uF capacitance, rated at 35V URdc. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact design and stable performance in various electronic devices.
M39006/22-0351
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
M39006/250052
Cornell Dubilier Electronics
M39006/250052 by Cornell Dubilier Electronics is a TANTALUM (WET) capacitor with a capacitance of 120 uF and rated DC voltage of 50 V. It has a tan delta of 0.225 and leakage current of 0.004 mA, making it suitable for applications requiring high ripple current and low leakage.
C0805C104K5RACAUTO7210
KEMET C0805C104K5RACAUTO7210 is a ceramic capacitor with 10% negative tolerance, X7R temperature characteristics, and 0.1 uF capacitance. Ideal for automotive applications due to AEC-Q200 standard compliance, rated 50V DC voltage, and compact SMT package style.
0805B104K500CT
Knowles Precision Devices
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
TAJA106K010RNJV
TAJA106K010RNJV by KYOCERA AVX is a 10uF Tantalum Capacitor with 10% positive/negative tolerance, suitable for applications requiring a rated DC voltage of 10V. With a compact SMT package style and dimensions of 3.2mm x 1.6mm x 1.6mm, it operates b/w -55°C to 125°C and has an ESR of 3000 mΩ, making it ideal for various electronic circuits.
ECWF4104HL
Panasonic
The Panasonic ECWF4104HL is a film capacitor with capacitance of 0.1uF and rated DC voltage of 400V. It has a negative tolerance of 3% and operates b/w -40°C to 105°C. Ideal for applications requiring fixed capacitors in bulk packaging, with through-hole mounting feature.
0402YC103KAT2A
0402YC103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance, 16V URdc, and X7R temperature characteristics. Ideal for surface mount applications in electronics due to its compact size, high operating temperature of 125°C, and low min operating temperature of -55°C.
UWT1V221MNL1GS
Nichicon
The Nichicon UWT1V221MNL1GS is a 220uF aluminum electrolytic capacitor with a rated DC voltage of 35V. It features a tan delta of 0.14, leakage current of 0.077mA, and ripple current of 190mA, making it ideal for automotive applications meeting AEC-Q200 standards.
GCM188R72A103KA37D
Murata Manufacturing
Murata Manufacturing's GCM188R72A103KA37D is a ceramic capacitor with 0.01uF capacitance, 100V URdc, and X7R temperature characteristics. It is used in SMT applications for automotive electronics due to AEC-Q200 compliance and compact size of 1.6mm x 0.8mm x 0.8mm.
VJ0402Y103KXXAC
Vishay Intertechnology
Vishay Intertechnology's VJ0402Y103KXXAC is a ceramic capacitor with 0.01uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 150°C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 1x0.5x0.6mm, making it suitable for various electronic devices requiring stable capacitance in a small form factor.
GRM155R71C224KA12D
The Murata Manufacturing GRM155R71C224KA12D is a ceramic capacitor with capacitance of 0.22uF and rated DC voltage of 16V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact, high-performance capacitors.
12105C475K4T2A
12105C475K4T2A by KYOCERA AVX is a ceramic capacitor with 4.7uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
EEE1HA4R7WR
Panasonic EEE1HA4R7WR is a 4.7uF aluminum electrolytic capacitor with 50V rated DC voltage, suitable for AEC-Q200 standards. It features tan delta of 0.14, leakage current of 0.003mA, and ripple current of 18mA, making it ideal for automotive applications requiring high reliability in a compact SMT package.
GRM31CR71E106KA12L
GRM31CR71E106KA12L by Murata is a ceramic capacitor with 10uF capacitance and 25V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it suitable for various applications in electronics requiring stable performance in a compact SMT package.
M39006/25-0248
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
381LQ221M450K022
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
381LR221M450K032
381LR221M450K032 by Cornell Dubilier Electronics is a 220uF, 450V Aluminum Electrolytic Capacitor with 0.9439mA Leakage Current and 1420mA Ripple Current. Ideal for applications requiring high capacitance and voltage stability in a cylindrical package.
381LR221M400J042
381LR221M400J042 by Cornell Dubilier Electronics is a 220uF, 400V aluminum electrolytic capacitor with 0.8899mA leakage current and 1420mA ripple current. Ideal for applications requiring high capacitance and voltage stability in a cylindrical package.
381LX153M063A052
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 15000 uF; Rated DC Voltage (URdc): 63 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
381LR222M200A052
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 2200 uF; Rated DC Voltage (URdc): 200 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
381LQ221M400J032
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
381LQ331M450A032
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
381LR271M400K032
381LR271M400K032 by Cornell Dubilier Electronics is a 270uF, 400V aluminum electrolytic capacitor with 0.9859mA leakage current and 1560mA ripple current. Ideal for applications requiring high capacitance and voltage stability in a cylindrical snap-in package.
381LR152M200A042
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 1500 uF; Rated DC Voltage (URdc): 200 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
381LR221M400K022
381LQ271M400K022
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 270 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
381LX102M400A082
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 1000 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
381LX271M400A022
381LQ121M450H032
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 120 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
381LQ681M250K022
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 680 uF; Rated DC Voltage (URdc): 250 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
381LR221M420H452
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 420 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
381LX153M025J452
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 15000 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
381LQ152M200K042
381LR681M250J452
381LR821M200J042
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 820 uF; Rated DC Voltage (URdc): 200 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved