Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.6 A; Terminal Shape: END CAP;
Median Price
$105.330
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
100+ parts
-
1k+ parts
10k+ parts
RS (Exports)
$84.260
Carlton-Bates
$32.520
Nova Conductors
$39.830
Vyrian
Electronic Supply
Q Components
Corohmni
$3.446
Aztec Data Supply Inc.
$9.680
AZTECH Wire
$12.591
Continental Prestige Electronics
$39.033
Netroflash
Semicontronic
$60.230
$58.724
$58.423
Component Stockers USA
$341.050
Argo Parts USA
Authorized Procurement Solutions
Fuses LP-CC-1-6/10 attributes and parameters. Explore more Fuses devices from Cooper Industries
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Additional Features:
Reference Standard:
Manufacturer Series:
Terminal Shape:
Mounting Feature:
LP-CC-1-6/10 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
EU2B-YS3203F
Idec
ROTARY SWITCH;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
Good-ark Electronics
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LP-CC-2-1/2
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.5 A; Terminal Shape: END CAP;
0218.500HXP
Littelfuse
Littelfuse 0218.500HXP fuse, rated at 0.5A and 250V, features a time lag blow characteristic with a trip delay of 0.02s. With dimensions of 5x20mm, it is commonly used for circuit protection in applications requiring a max operating temperature of 125°C and a rated breaking capacity of 35A.
ANN-500
Eaton Corporation
Eaton Corporation's ANN-500 fuse is a 500A electric fuse with very fast blow characteristic. It has a rated AC voltage of 125V and rated breaking capacity of 2500A. Ideal for surface mount applications, it features built-in indicator and meets CSA and UL standards.
LPJ-50SP
Eaton Corporation's LPJ-50SP fuse, rated at 50A and 600V AC/DC, features a J class with time delay blow characteristic. With a compact size of 27mm x 60.3mm, it is ideal for circuit protection in various applications requiring a high breaking capacity of 300kA. Compliant with CE, CSA, and UL standards, it is commonly used in inline or holder mounting configurations.
0218010.MXP
Littelfuse 0218010.MXP fuse, rated at 10A and 250V, with a trip time of 0.02s. Ideal for circuit protection in applications requiring a time lag blow characteristic. Compact size of 5x20mm makes it suitable for inline mounting in various electronic devices.
325.300
The Littelfuse 325.300 fuse is rated at 250V AC with a slow blow characteristic and 0.3A current. Its dimensions are 6.99mm x 32.39mm, suitable for electric circuit protection in various applications like industrial machinery and electronic equipment. Compliant with CSA and UL standards, it features pin wire terminals with tin/lead finish for through-hole mounting.
0239001.MXP
Littelfuse 0239001.MXP fuse, rated at 1A and 250V, offers a time lag blow characteristic with trip delay of 120s. With dimensions of 5x20mm and nickel terminal finish, it is ideal for circuit protection in applications requiring supplemental fuses with a rated breaking capacity of 35A.
0466005.NRHF
Littelfuse 0466005.NRHF is a 1206 size supplemental fuse with rated current of 5A and nominal joule integral of 2.5J. It has fast blow characteristic, trip time of 0.2s, and is ideal for circuit protection in applications requiring surface mount fuses at rated AC/DC voltage of 32V.
ATQR12
Mersen S A
Mersen S A's ATQR12 fuse, rated 12A and 600V AC, features time delay blow characteristic. With a compact body size of 10.4mm x 38.1mm, it offers high breaking capacity of 200kA. Ideal for electric circuit protection in various applications with CSA, CE, UL certifications.
3403.0155.24
Schurter Ag
Schurter Ag's 3403.0155.24 fuse is a TIME LAG type with 0.08A rated current and 250V AC/DC voltage, suitable for ELECTRIC FUSE circuit protection in various applications. With dimensions of 10.1mm x 3mm x 3mm and a rated breaking capacity of 200A, it offers reliable performance at temperatures ranging from -55°C to 125°C. Ideal for surface mount installations, this fuse has a nominal joule integral of 0.022J for efficient energy dissipation.
31.7601
ELECTRIC FUSE;
LP-CC-6/10
Eaton Corporation LP-CC-6/10 fuse, rated 600V AC/0.6A, with time delay blow characteristic. Inline/holder mounting for circuit protection in CE/CSA/UL compliant applications. Dimensions: 10mm x 38.1mm, body height 38mm, and rated breaking capacity of 200kA.
ATC-3
The Eaton Corporation's ATC-3 fuse is a 32V, 3A electric fuse with fast blow characteristic. It has a rated breaking capacity of 1000A and operates b/w -40°C to 100°C. Ideal for circuit protection in various applications like automotive, industrial machinery, and electronics due to its compact size and UL standard compliance.
FNQ-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 15 A; Terminal Shape: END CAP; Fuse Size: MIDGET;
0326015.MXP
Littelfuse 0326015.MXP fuse, rated at 15A and 250V, offers a trip time of 5s with a pre-arcing rating of 245 A2/s. With dimensions of 6.35mm x 31.75mm, it is ideal for circuit protection in applications requiring a time delay blow characteristic and terminal shape end cap. Compliant with CE, CSA, KC, PSE, TUV, and UL standards.
LP-CC-6
LP-CC-6 by Eaton Corp is a 6A time delay electric fuse with 600V AC and 150V DC ratings. Measuring 10x38.1mm, it has a breaking capacity of 200kA. Ideal for inline mounting, it meets CE, CSA, and UL standards for circuit protection applications.
FNQ-R-25
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 25 A; Terminal Shape: END CAP;
ATDR2-8/10
The Mersen S A ATDR2-8/10 fuse is rated for 600V AC and 300V DC with a current rating of 2.8A. Featuring time delay blow characteristic, it offers circuit protection with a breaking capacity of 200kA. Commonly used in applications requiring inline mounting, this fuse meets CSA and UL standards.
0451010.MRL
0451010.MRL by Littelfuse is a NANO fuse with 10A rated current and 125V rated voltage. It has a very fast blow characteristic, 26.46J nominal joule integral, and trip time of 5s. Ideal for circuit protection in applications requiring surface mount fuses with high breaking capacity.
3413.0008.22
Schurter Ag's 3413.0008.22 fuse is a 3.2x1.6mm surface mount type with 0.16A current rating and 125V AC voltage, suitable for electric circuit protection applications. It has a very fast blow characteristic, gold terminal finish, and meets CUL and UL standards for reliable performance in temperatures ranging from -55 to 90°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LP-CC-30
Eaton Corporation's LP-CC-30 fuse, rated at 30A and 600V AC/300V DC, features time delay blow characteristic. With a compact body size of 10x38.1mm, it is ideal for inline mounting applications requiring electric circuit protection with a high breaking capacity of 200kA.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 30 A; Terminal Shape: END CAP;
LP-CC-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 10 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 10 A; Terminal Shape: END CAP;
LP-CC-10 by Eaton Corp is a 10A time delay electric fuse with 600V AC & 150V DC ratings. Measuring 10x38.1mm, it has a breaking capacity of 200kA. Commonly used in inline/holder setups for circuit protection in various applications.
LP-CC-25
LP-CC-25 fuse by Eaton Corporation is a time delay electric fuse with a rated current of 25 A and a rated AC voltage of 600 V. It is commonly used for circuit protection in applications such as inline or holder mounting.
LP-CC-20
Eaton Corporation LP-CC-20 fuse, rated 20A and 600V AC/DC, with time delay blow characteristic. Used for circuit protection in applications requiring a 10mm x 38.1mm body size and end cap terminal shape. Complies with CE, CSA, UL standards and has a high breaking capacity of 200kA.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 20 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 6 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 6 A; Terminal Shape: END CAP;
LP-CC-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 15 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 15 A; Terminal Shape: END CAP;
Eaton Corporation LP-CC-15 fuse, rated 15A and 600V, features time delay blow characteristic. With dimensions of 10.3mm x 38.1mm, it is used for electric circuit protection in applications requiring a rated breaking capacity of 200000A. It conforms to CE, CSA, and UL standards for safe use.
LP-CC-3
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 3 A; Terminal Shape: END CAP;
The Eaton LP-CC-3 fuse, with 3A rated current and 600V AC voltage, features time delay blow characteristic. Measuring 10.3mm x 38.1mm, it is ideal for electric circuit protection in various applications. With a rated breaking capacity of 200kA and CE/CSA/UL certifications, it is commonly used in inline or holder mounting setups.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved