Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.25 A; Terminal Shape: END CAP;
Median Price
$131.855
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$106.000
100+ parts
-
1k+ parts
10k+ parts
Master Electronics
$131.630
$115.670
RS (Exports)
$132.080
$118.870
Verical
$162.306
$137.463
Carlton-Bates
$32.520
Nova Conductors
$45.670
Quotebeam
$89.530
Electro Sonic
$109.250
$63.190
$62.880
IBS Electronics
$157.497
$138.067
$137.715
Vyrian
Electronic Supply
Q Components
PC Components Company LLC
Bristol Electronics
Corohmni
$11.511
AZTECH Wire
$12.160
$11.680
$11.440
$11.220
Aztec Data Supply Inc.
$20.201
Continental Prestige Electronics
$44.757
Component Stockers USA
$57.700
Semicontronic
$131.090
$127.813
$127.157
Neutron USA
$159.990
Argo Parts USA
Glotronic Ltd.
Netroflash
$43.387
$42.473
Authorized Procurement Solutions
Fuses LP-CC-1-1/4 attributes and parameters. Explore more Fuses devices from Cooper Electronic Technologies
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Additional Features:
Reference Standard:
Manufacturer Series:
Terminal Shape:
Mounting Feature:
Packing Method:
LP-CC-1-1/4 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Packaging - Shipping Box and Labels 05/Jan/2018
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
PTS120630V016
Eaton Corporation
Eaton Corporation's PTS120630V016 fuse has a trip time of 0.3s, rated voltage of 30V, and resistance of 4.5 ohm. Ideal for circuit protection in electronics with fast blow characteristic, surface mount feature, and TUV/UL reference standard compliance.
0473003.MRT1L
Littelfuse
Littelfuse 0473003.MRT1L PICO fuse with 3A current, 125V AC/DC voltage rating, and 21J joule integral. Ideal for circuit protection in applications requiring time delay blow characteristic and rated breaking capacity of 50A. Dimensions of 3.43mm x 7.11mm make it suitable for through-hole mounting in various electronic devices.
ERBRE2R00V
Panasonic
The Panasonic ERBRE2R00V is a 0603 size fuse with a rated current of 2A and a max operating temperature of 125°C. It is designed for circuit protection in applications requiring fast blow characteristics, such as surface mount electronics.
FWX-40A
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 40 A; Terminal Shape: TAB/BLADE;
BK/ATM-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; Reference Standard: UL;
7012540.5
Siba
Siba 7012540.5 is a 5A electric fuse with a rated AC voltage of 600V and a blow characteristic of VERY FAST. It has dimensions of 6.35mm x 31.8mm and is commonly used for circuit protection in inline/holder mounting applications.
JJS-50
Eaton Corporation's JJS-50 fuse, rated at 50A and 600V AC, features a very fast blow characteristic with a breaking capacity of 200kA. With dimensions of 20.6mm x 39.7mm and end cap terminals, it is commonly used for electric circuit protection in various applications compliant with CE, CSA, and UL standards.
FNQ-R-1/2
Eaton Corporation's FNQ-R-1/2 fuse, rated at 600V and 0.5A, features time delay blow characteristic. With a rated breaking capacity of 200kA, it is used for electric circuit protection in various applications. Measuring 10.3mm x 38.1mm, it has nickel terminal finish and can be mounted inline or in a holder.
0437001.WR
Littelfuse 0437001.WR is a fast blow fuse with 1A rated current, 63V DC voltage, and 0.1J nominal joule integral. Ideal for circuit protection in electronics, it has a compact size of 1206 and WRAPAROUND terminals. Operating temperature ranges from -55°C to 150°C.
0217005.HXP
Littelfuse 0217005.HXP fuse, rated at 5A and 250V, offers very fast blow characteristic with a trip time of 0.01s. Ideal for circuit protection in applications requiring a compact 5x20mm size fuse with nickel terminal finish. Operating temperature range from -55 to 125°C ensures reliable performance in various environments.
FWP-50A22F
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: 50 A; Terminal Shape: END CAP;
LPJ-50SP
Eaton Corporation's LPJ-50SP fuse, rated at 50A and 600V AC/DC, features a J class with time delay blow characteristic. With a compact size of 27mm x 60.3mm, it is ideal for circuit protection in various applications requiring a high breaking capacity of 300kA. Compliant with CE, CSA, and UL standards, it is commonly used in inline or holder mounting configurations.
BK/AGC-10-R
BK/AGC-10-R by Cooper Industries is a 10A fast blow electric fuse with rated voltage of 250V AC. It has a nominal joule integral of 0.492J and dimensions of 6.35mm x 31.75mm, suitable for inline mounting applications in circuit protection systems.
0218002.HXP
Littelfuse 0218002.HXP fuse, rated 2A at 250V, features time lag blow characteristic with 0.02s trip delay. Ideal for circuit protection in applications requiring supplemental fuses with 5x20mm size and nickel terminal finish. Compliant with CCC, CE, CSA, IEC, KC, PSE, SEMKO, UL, VDE standards.
ATDR1-4/10
Mersen S A
ATDR1-4/10 by Mersen S A is a 1.4A time delay electric fuse with 600V AC and 300V DC ratings. It features an end cap terminal shape, inline mounting, and a compact size of 10.4mm x 38.1mm. Ideal for circuit protection in various applications meeting CSA and UL standards.
0217.400MXP
Littelfuse 0217.400MXP fuse, rated at 0.4A and 250V, offers very fast blow characteristic with trip time of 0.01s. Measuring 5x20mm, it is used for electric circuit protection in applications requiring a compact 5.2mm x 20mm body size and terminal shape end cap.
0AKK-K100-BB
Bel Fuse
The Bel Fuse 0AKK-K100-BB is a fast blow electric fuse with a rated current of 100 A and a max operating temperature of 125°C. It has a nominal joule integral of 1560 J and is commonly used for circuit protection in applications requiring high breaking capacity and DC voltage up to 1000 V.
0453003.MR
Littelfuse 0453003.MR fuse, rated at 125V and 3A, offers very fast blow characteristic with a trip time of 5s. Nano-sized with dimensions of 6.1mm x 2.69mm x 2.69mm, it is ideal for circuit protection in applications requiring surface mounting method and wraparound terminal shape.
3413.0002.11
Schurter Ag
Schurter Ag's 3413.0002.11 fuse is a 3.2x1.6mm electric fuse with 0.05A rated current and 125V AC voltage, suitable for circuit protection in various applications. With a very fast blow characteristic and high breaking capacity of 10A, it operates b/w -55°C to 90°C temperatures efficiently, meeting CUL and UL standards for reliable performance.
FWP-63A22F
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: 63 A; Terminal Shape: END CAP;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LP-CC-30
Eaton Corporation's LP-CC-30 fuse, rated at 30A and 600V AC/300V DC, features time delay blow characteristic. With a compact body size of 10x38.1mm, it is ideal for inline mounting applications requiring electric circuit protection with a high breaking capacity of 200kA.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 30 A; Terminal Shape: END CAP;
LP-CC-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 10 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 10 A; Terminal Shape: END CAP;
LP-CC-10 by Eaton Corp is a 10A time delay electric fuse with 600V AC & 150V DC ratings. Measuring 10x38.1mm, it has a breaking capacity of 200kA. Commonly used in inline/holder setups for circuit protection in various applications.
LP-CC-25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 25 A; Terminal Shape: END CAP;
LP-CC-25 fuse by Eaton Corporation is a time delay electric fuse with a rated current of 25 A and a rated AC voltage of 600 V. It is commonly used for circuit protection in applications such as inline or holder mounting.
LP-CC-20
Eaton Corporation LP-CC-20 fuse, rated 20A and 600V AC/DC, with time delay blow characteristic. Used for circuit protection in applications requiring a 10mm x 38.1mm body size and end cap terminal shape. Complies with CE, CSA, UL standards and has a high breaking capacity of 200kA.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 20 A; Terminal Shape: END CAP;
LP-CC-6
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 6 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 6 A; Terminal Shape: END CAP;
LP-CC-6 by Eaton Corp is a 6A time delay electric fuse with 600V AC and 150V DC ratings. Measuring 10x38.1mm, it has a breaking capacity of 200kA. Ideal for inline mounting, it meets CE, CSA, and UL standards for circuit protection applications.
LP-CC-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 15 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 15 A; Terminal Shape: END CAP;
Eaton Corporation LP-CC-15 fuse, rated 15A and 600V, features time delay blow characteristic. With dimensions of 10.3mm x 38.1mm, it is used for electric circuit protection in applications requiring a rated breaking capacity of 200000A. It conforms to CE, CSA, and UL standards for safe use.
LP-CC-3
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 3 A; Terminal Shape: END CAP;
The Eaton LP-CC-3 fuse, with 3A rated current and 600V AC voltage, features time delay blow characteristic. Measuring 10.3mm x 38.1mm, it is ideal for electric circuit protection in various applications. With a rated breaking capacity of 200kA and CE/CSA/UL certifications, it is commonly used in inline or holder mounting setups.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved