Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
Median Price
$75.170
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Walker Industrial
1+ parts
$23.300
100+ parts
-
1k+ parts
10k+ parts
Farnell
$37.110
$28.540
RS Americas
$45.130
$36.100
Master Electronics
$74.490
$42.510
$38.580
DigiKey
$74.740
$43.575
$39.638
Newark
$61.680
$58.310
Mouser Electronics
$81.380
$56.070
RS (Exports)
$83.960
$67.180
Verical
$93.463
IEC Supply
$575.600
Element14
$4,684.260
$3,475.920
$3,270.640
Airline Hydraulics
TEDSS.com
$21.860
Galco
Carlton-Bates
$24.970
Kempston Controls
$34.190
Nova Conductors
$35.940
Hutch & Son
$39.940
Electro Sonic
$47.570
$37.440
$36.870
Quotebeam
$59.340
IBS Electronics
$102.200
$59.620
$54.235
Electronic Supply
Elcom Components
Masline Electronics Inc.
Vyrian
Q Components
MISTER SPROCKETS
Pride Electronics
Powertech Controls
AZTECH Wire
$18.110
$17.390
$17.040
$16.700
Semicontronic
$19.800
$19.305
$19.206
Corohmni
$20.811
Aztec Data Supply Inc.
$21.258
Allen Electronics Distributors
$24.130
Continental Prestige Electronics
$31.590
$24.010
Advanced Electronics
$32.318
Netroflash
Component Stockers USA
$46.050
$36.000
Neutron USA
$134.990
Authorized Procurement Solutions
Argo Parts USA
Perfect Parts
Fuses KTK-R-2 attributes and parameters. Explore more Fuses devices from Cooper Electronic Technologies
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Reference Standard:
Manufacturer Series:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
KTK-R-2 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Packaging - Shipping Box and Labels 05/Jan/2018
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
BSS138-7-F
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
USB3320C-EZK-TR
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
4554
Jw Miller Magnetics
Other Semiconductors;
LD1117S33TR
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ATM-5
Eaton Corporation
Eaton Corporation's ATM-5 fuse, with 5A rated current and 32V rated voltage, features fast blow characteristic. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in various applications like inline or holder mounting due to its UL reference standard compliance.
SP/LPJ-125SP
Eaton Corporation's SP/LPJ-125SP fuse, rated 125A and 600V AC, features time delay blow characteristic. With a body size of 41.4mm x 76.2mm and silver terminal finish, it is ideal for electric circuit protection in various applications like CE, CSA, UL standards compliant installations.
BK/ATM-15
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 10.92 mm;
0001.2534
Schurter Ag
Schurter Ag 0001.2534 fuse, rated 10A with 250V AC & 63V DC, offers time lag blow characteristic and 1500A breaking capacity. Ideal for electric circuit protection in applications requiring a compact 6.3x32mm size fuse with nickel terminal finish and CUL/UL standards compliance.
FNQ-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 15 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
LP-CC-1-8/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.8 A; Terminal Shape: END CAP;
0452005MRL
Littelfuse
0452005MRL by Littelfuse is a NANO fuse with 125V voltage rating and 5A current. With time lag blow characteristic, it offers circuit protection in various applications. Featuring trip delay of 14400s, it is ideal for use in electronics requiring reliable overcurrent protection.
LP-CC-20
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 20 A; Terminal Shape: END CAP;
0ATO010.V
0ATO010.V fuse by Littelfuse offers a rated current of 10A and trip time of 0.1s, suitable for electric circuit protection with a rated breaking capacity of 1000A. With a compact body size of 19.1mm x 12.3mm x 5.1", it is ideal for inline mounting applications in various electronic devices.
3410.0035.01
Schurter Ag's 3410.0035.01 fuse is a 1206 size with 2A current rating, suitable for electric circuit protection at 125V AC/DC. It has super-fast blow characteristic, rated breaking capacity of 50A, and operates b/w -55°C to 150°C. Ideal for surface mount applications requiring high joule integral (0.089 J) fuses.
KTK-R-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
TR/3216FF2-R
Eaton Corporation's TR/3216FF2-R fuse, rated at 2A and 63V, features fast blow characteristic with trip time of 5s. With dimensions of 3.2mm x 1.6mm x 0.89mm, it is ideal for circuit protection in automotive applications meeting AEC-Q200, CSA, and UL standards.
FNQ-R-1-1/8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.125 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
02170.05HXP
Littelfuse 02170.05HXP fuse, rated at 0.05A and 250V, offers fast blow characteristic with trip time of 0.003s. Ideal for circuit protection in applications requiring 250V AC voltage protection. Measuring 5x20mm, it has a rated breaking capacity of 35A and operates b/w -55°C to 125°C.
PTS120616V035
Eaton Corporation's PTS120616V035 fuse, with 0.35A current and 16V voltage rating, offers fast blow characteristic in a 1206 size. Ideal for circuit protection, it has a trip time of 0.1s and rated breaking capacity of 100A. Suitable for surface mount applications with TUV and UL standards compliance.
ATC-30
Eaton Corporation's ATC-30 fuse, rated at 30A and 32V, offers fast blow characteristic with a trip time of 0.1s. With dimensions of 19.3mm x 5.25mm x 12.5mm, it is ideal for electric circuit protection in applications requiring a max operating temperature of 100°C and UL reference standard compliance.
FWX-40A
The Eaton Corporation FWX-40A fuse, with 40 A rated current and 200000 A breaking capacity, is ideal for electric circuit protection at 250 V AC/DC. Featuring a compact body of 20.57mm x 40.39mm, it has TAB/BLADE terminals and meets CE, CSA, and UL standards for various applications in inline or holder mounting configurations.
0297015.WXNV
Littelfuse 0297015.WXNV is a MINI fuse with 15A rated current, 308J nominal joule integral, and 0.03s trip time. Ideal for circuit protection in automotive applications due to its compact size (10.9mm x 3.8mm x 8.8mm) and high breaking capacity of 1000A at rated voltage of 32V.
0218005.MXP
Littelfuse 0218005.MXP fuse, rated 5A and 250V, with 0.02s trip time. Ideal for circuit protection in applications requiring a time lag blow characteristic. Features 111J nominal joule integral and compact 5x20mm size for inline mounting.
BK-MDL-2-R
BK-MDL-2-R by Eaton Corp is a 250V, 2A time delay electric fuse with 62.3J nominal joule integral. Measuring 6.4x31.7mm, it has a rated breaking capacity of 100A and terminal finish in Ni. Ideal for inline mounting applications, it conforms to CE, CSA, and UL standards for reliable circuit protection.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KTK-R-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 15 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 15 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 15 A; Terminal Shape: END CAP; Reference Standard: CE; CSA; UL;
KTK-R-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 10 A; Terminal Shape: END CAP; Reference Standard: CE; CSA; UL;
Eaton Corporation's KTK-R-10 fuse, rated at 10A and 600V AC, features fast blow characteristic with a breaking capacity of 200kA. It is a CC class fuse with nickel terminal finish, suitable for electric circuit protection in various applications requiring inline mounting or holder installation. Compliant with CE, CSA, and UL standards, it comes in a box packing method.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 10 A; Terminal Shape: END CAP; Packing Method: BOX;
KTK-R-1/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .1 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
The Eaton Corporation's KTK-R-1/10 fuse, rated at 0.1A and 600V AC, features a fast blow characteristic with a body size of 10.3mm x 38.1mm. Designed for electric circuit protection, it has a high breaking capacity of 200kA and is suitable for inline mounting applications per CE, CSA, and UL standards.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .1 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
KTK-R-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .5 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .5 A; Terminal Shape: END CAP; Rated Breaking Capacity: 200000 A;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .5 A; Terminal Shape: END CAP; Packing Method: BOX;
KTK-R-12
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 12 A; Terminal Shape: END CAP; Packing Method: BOX;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 12 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
KTK-R-1 fuse by Eaton Corporation is a 1A, 600V fast blow electric fuse with a rated breaking capacity of 200kA. It has a compact body size of 10.3mm x 38.1mm and is commonly used for circuit protection in inline or holder mounting applications.
KTK-R-20
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 20 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 20 A; Terminal Shape: END CAP; Terminal Finish: Nickel (Ni);
Eaton Corporation's KTK-R-20 fuse, rated at 20A and 600V, features fast blow characteristic with a breaking capacity of 200kA. This CC-class fuse, with nickel terminal finish, is ideal for electric circuit protection in applications requiring inline mounting. Compliant with CE, CSA, and UL standards, it comes in a box packing method.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved