Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DS1093-01-BN40 by Connfly Electronic is a Circular DIN Connector with 4 contacts, rated at 1A signal current. It has a dielectric voltage of 707VAC and insulation resistance of 1Gohm. Ideal for board mounting applications, it operates b/w -40 to +105°C temperatures.
Median Price
$0.385
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
EVE
1+ parts
$0.440
100+ parts
-
1k+ parts
10k+ parts
Verical
$0.330
TME
$0.846
$0.345
$0.288
Vyrian
Nova Conductors
Aztec Data Supply Inc.
$7.766
Continental Prestige Electronics
Aranea Global
Argo Parts USA
The compact body length of 0.551 inch makes this DIN connector suitable for applications where space is limited.
High insulation resistance of 1000000000 ohm ensures reliable performance and reduces the risk of electrical leakage.
The high dielectric withstanding voltage of 707VAC offers excellent protection against voltage breakdown and ensures safety in power applications.
With a maximum operating temperature of 105 °C, this DIN connector can withstand high temperatures, making it ideal for industrial and automotive environments.
The flash plating thickness enhances the durability and conductivity of the connector, ensuring reliable signal transmission.
Low contact resistance of 30 mohm ensures efficient power transmission and reduces energy loss, making this connector a reliable choice for high-performance applications.
DIN Connectors DS1093-01-BN40 attributes and parameters. Explore more DIN Connectors devices from Connfly Electronic
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Connector Type:
Contact Gender:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
EMI Shielded:
Insulation Resistance:
Insulator Color:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Shell Finish:
Terminal Length:
Termination Type:
Total No. of Contacts:
DS1093-01-BN40 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
Connfly Electronic Co., Ltd. was founded in 2006, mainly engaged in the R & D, production and sales of connectors and wire products in the fields of intelligent instruments, LED lighting, wireless network, communication terminal, industrial equipment, personal short distance balance car, elevator, automotive electronics and financial system, etc. the company has passed ISO9001 quality management system certification, ISO14001 environmental system certification and OHSAS18001 post The products have passed the CE certification, FCC certification and UL certification. The company's products include pin, bus, led connector, IDC socket, IC socket, box header, Shrouded header, D-sub, industrial vehicle hardware and zinc alloy shell, pull switch, FPC, FFC, automotive electronic connector, atmosphere lamp, micro Match, European socket, bread board, jumper, flat wire, various electronic wires, network sockets, wafer, various wiring wires, etc. the products produced by the company meet the requirements of rohs2.0 and reach environmental protection directive.
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Signetics
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
Onsemi
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
SN65HVD230DR
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SD-80SN
Cui Devices
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Durability: 5000 Cycles; Minimum Operating Temperature: 5 Cel;
5749266-1
Tyco Electronics Amp
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Mounting Style: RIGHT ANGLE; Total No. of Contacts: 6;
121583-0095
Itt Cannon
ITT Cannon's 121583-0095 is a Circular DIN Connector with 51 contacts, Tin (Sn) finish, and Crimp termination. Compliant with DIN Standard 72585, it is ideal for applications requiring reliable cable and panel mounting in various industries.
010705
Lumberg Connect
Lumberg Connect 010705 is a DIN Circular Connector with EMI shielding, ABS insulator, and nickel shell finish. It has 5 contacts, rated at 4A signal current, suitable for commercial applications. With a temperature range of -20 to 85°C, it offers reliable performance in various panel-mounting setups.
SD-130
Cui
The Cui SD-130 DIN Connector features EMI shielding, 1000VAC dielectric voltage, and 13 contacts. With a durable steel shell and solder termination, it is ideal for applications requiring high insulation resistance (100M ohm) and a rated current of 2A in temperatures ranging from 5°C to 70°C.
C09131H0062012U
Amphenol
DIN Connectors;
SDS-50J
The Cui SDS-50J is a circular DIN connector with 5 contacts, rated at 2A signal current. It features a dielectric voltage of 250VAC and insulation resistance of 50M ohm. With POLYBUTYLENE TEREPHTHALATE insulator, it's ideal for board mounting applications requiring reliable female contacts.
86091326114765V1LF
AMPHENOL ICC
CIRCULAR DIN CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
5750317-2
TE Connectivity 5750317-2 is a DIN connector with EMI shielding, suitable for board mounting. Featuring tin termination finish, it has 4 contacts and operates b/w -55 to 105°C. With a rated current of 0.5A, this circular connector is ideal for commercial applications requiring reliable signal transmission.
TE Connectivity's 5749266-1 is a Circular DIN Connector with EMI shielding, suitable for board mounting. It features a 6.5mm terminal pitch, POLYETHYLENE insulator material, and COPPER ALLOY contact material. With a rated current of 0.5A and durability of 500 cycles, it is ideal for commercial applications requiring reliable signal connections.
MD-60SN
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Body Width: .6 inch; Body Depth: .563 inch;
930954-517
Hirschmann Electronics & Kg
CIRCULAR DIN CONNECTOR; Contact Gender: FEMALE; MIL Conformity: NO; Mounting Type: PANEL; Body or Shell Style: SOCKET; IEC Conformity: NO;
CAR2PC68WP
TE Connectivity's CAR2PC68WP is a DIN Connector with GLASS FILLED POLYAMIDE insulator. It has 2.1" x 2.44" x 2.2" dimensions, operating from -40°C to 85°C. Suitable for applications requiring FEMALE contact gender, CABLE mounting, and 115/230VAC mains connector rating.
MD-60SMS
CIRCULAR DIN CONNECTOR;
121583-0189
121583-0189 by Itt Cannon is a circular DIN connector with 51 contacts. It is a male plug with crimp termination, suitable for cable mounting. This connector conforms to the DIN standard and can be used in various applications requiring reliable and secure connections.
9906190006
Franz Binder &
CIRCULAR DIN CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
9901351003
SD-50SN
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Reference Standard: UL; Total No. of Contacts: 5;
C09131K0081002
MD-80SM
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Total No. of Contacts: 8; Contact Style: RND PIN-SKT;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS1093-01-BN60
Connfly Electronic
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; No. of Ports: 1; Termination Type: SOLDER;
DS1093-01-BN70
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; Total No. of Contacts: 7; Contact Style: RND PIN-SKT;
DS1093-01-BN80
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; Termination Type: SOLDER; Insulation Resistance: 1000000000 ohm;
DS1093-01-G640
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; EMI Shielded: NO; Board Mounting Option: SPLIT BOARD LOCK;
DS1093-01-P640
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; Mounting Style: RIGHT ANGLE; Mounting Option-1: LOCKING;
DS1093-01-PN60
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; Body Length: .551 inch; Rated Current - Signal: 1 A;
DS1093-01-B660
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; Rated Current - Signal: 1 A; Contact Style: RND PIN-SKT;
DS1093-01-BN50
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; Minimum Operating Temperature: -40 Cel; Polarization Key: POLARIZED;
DS1093-01-P660
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; Insulator Color: PURPLE; Plating Thickness (inch): FLASH;
DS1093-01-GN50
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; Mounting Style: RIGHT ANGLE; Maximum Operating Temperature (Cel): 105;
DS1093-01-GN40
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; Polarization Key: POLARIZED; Terminal Length: .138 inch;
DS1093-01-B680
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; Shell Finish: TIN; Contact Resistance: 30 mohm;
DS1093-01-GN80
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; Board Mounting Option: SPLIT BOARD LOCK; Body Length: .551 inch;
DS1093-01-B640
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; Mounting Option-1: LOCKING; Plating Thickness (inch): FLASH;
DS1093-01-G650
DS1093-01-GN70
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; Minimum Operating Temperature: -40 Cel; Mounting Type: BOARD;
DS1093-01-PN40
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; Contact Resistance: 30 mohm; Contact Style: RND PIN-SKT;
DS1093-01-B650
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; Body Width: .508 inch; Board Mounting Option: SPLIT BOARD LOCK;
DS1093-01-B670
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; Shell Finish: TIN; EMI Shielded: NO;
DS1093-01-G660
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; Body Depth: .512 inch; EMI Shielded: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved