Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Coilcraft XAL5030-222MEB is a shielded, surface mount inductor with 2.2uH nominal inductance and 9.7A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 38MHz and AEC-Q200 reference standard compliance.
Median Price
-
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Mil-Aero Solutions, Inc.
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
ComSIT Distribution GmbH
Nova Conductors
Bristol Electronics
Flex Direct, LLC
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Semtec, LLC
PC Components Company LLC
Aztec Data Supply Inc.
$0.130
Corohmni
$0.424
Advanced Electronics
$0.651
$0.618
Semicontronic
$1.050
$1.024
$1.018
Ampacity Inc.
$2.050
AZTECH Wire
$17.980
$17.270
$16.920
$16.580
GreenTree Electronics
Argo Parts USA
Continental Prestige Electronics
Futuretech Components
Kepictronics
Speed Components Ltd (Excess)
Bastille Electronics
Infinite Electronics LLP (Excess)
SIE Connect GmbH (Excess)
Easy to install and saves space on circuit board.
Reduces electromagnetic interference for improved performance.
Allows for flexibility in circuit design.
Provides accurate testing of inductance at a commonly used frequency.
Versatile for various applications.
Suitable for power applications requiring this inductance value.
Can handle high current loads.
Low profile and space-saving design.
Low resistance for efficient power transfer.
Fixed Inductors XAL5030-222MEB attributes and parameters. Explore more Fixed Inductors devices from Coilcraft
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
Reference Standard:
XAL5030-222MEB Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
RC0805FR-0710RL
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Tesla Elektronicke Soucastky
EU2B-YS3303C
Idec
ROTARY SWITCH;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
BAV99W-7-F
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
IHLP4040DZER100M11
Vishay Intertechnology
Vishay Intertechnology's IHLP4040DZER100M11 is a shielded, surface mount inductor with 10uH nominal inductance and 7.5A max rated current. Ideal for high current applications, this rectangular package has dual-ended terminals and operates b/w -55°C to 125°C.
SRP1038A-470M
Bourns
Bourns SRP1038A-470M is a shielded, dual-ended SMT inductor with 47uH nominal inductance and 3A max rated current. Ideal for power applications, it operates b/w -55 to 150°C with a self-resonance frequency of 5MHz. AEC-Q200 compliant, this general-purpose inductor offers high quality factor and wraparound terminals.
LQW15AN47NJ00D
Murata Manufacturing
LQW15AN47NJ00D by Murata is a wirewound chip inductor with 0.047 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and self-resonance frequency of 2900 MHz. With dual-ended terminals and compact 0402 size, it is ideal for surface mount designs requiring high-quality factor components.
PE-53809NL
Pulse Electronics
PE-53809NL by Pulse Electronics is a toroid inductor with 256uH nominal inductance, 2.2ohm DC resistance, and 0.25A max rated current. It is a power inductor suitable for general purpose applications like simple switchers, offering a temperature range from -40 to 130 °C.
4628
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Tolerance: 5 %;
LQH32MN3R3K23L
LQH32MN3R3K23L by Murata is a 3.3uH fixed inductor with dual-ended terminals, suitable for RF applications. Featuring a max operating temperature of 85°C and a DC resistance of 1 ohm, this general-purpose inductor has a self-resonance frequency of 38 MHz. Its compact size (1210 case) and high quality factor make it ideal for surface mount designs requiring reliable performance.
LQG15HN1N0S02D
Murata Manufacturing's LQG15HN1N0S02D is a 0402-sized fixed inductor with 0.001 uH nominal inductance, suitable for RF applications. With a max operating temperature of 125 °C and self-resonance frequency of 6000 MHz, it offers high quality factor at 8 and low DC resistance of 0.07 ohm. The dual-ended terminal placement and wraparound shape make it ideal for general purpose use in surface mount technology.
CTX100-10-52LPR
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Minimum Operating Temperature: -40 Cel;
SLF10145T-102MR29-PF
TDK
SLF10145T-102MR29-PF by TDK is a shielded, dual-ended fixed inductor with 1000uH nominal inductance. Ideal for power applications, it has a max rated current of 0.29A and operates b/w -40 to 105°C. Its compact SMT package measures 10.1mm x 10.1mm x 4.5mm, making it suitable for various general-purpose inductor needs.
LBM2016TR82JV
Taiyo Yuden
LBM2016TR82JV by Taiyo Yuden is a surface mount fixed inductor with dual-ended terminals. It has a nominal inductance of 0.82 uH, max operating temperature of 105°C, and self-resonance frequency of 250 MHz. Ideal for RF applications due to its high quality factor and general purpose design.
LB2012T100KR
LB2012T100KR by Taiyo Yuden is an 0805 fixed inductor with 10uH nominal inductance, suitable for power applications. It has a max operating temperature of 105°C and a DC resistance of 0.65 ohm, making it ideal for general purpose use at frequencies up to 32MHz. This surface mount inductor features dual-ended terminals with tin finish and nickel barrier.
NRS4018T2R2MDGJ8
NRS4018T2R2MDGJ8 by Taiyo Yuden is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 2.2A max rated current. It is a general purpose power inductor suitable for applications requiring high performance and reliability at temperatures ranging from -40 to 125°C.
74479775210A
Wuerth Elektronik & Kg
Wurth Elektronik's 74479775210A is an 0805 SMT fixed inductor with 1uH nominal inductance, suitable for power applications. It has a max rated current of 1.3A, DC resistance of 0.1375 ohm, and operates b/w -40 to 125°C.
B82145A1225J000
The TDK B82145A1225J000 is a tubular fixed inductor with 2200 uH nominal inductance, suitable for RF applications. Featuring a max operating temperature of 125°C and 0.25 A rated current, it offers a min quality factor of 60 at L-nom. With flame-proof construction and self-resonance frequency of 0.8 MHz, this general-purpose inductor is ideal for various electronic circuits.
DR74-680-R
Eaton Corporation
Eaton Corporation's DR74-680-R is a shielded, surface mount fixed inductor with 68uH nominal inductance. It has a max rated current of 1.03A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.
5609
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Test Frequency: .001 MHz;
B82477G4105M000
The TDK B82477G4105M000 is a shielded, surface mount fixed inductor with 1000uH nominal inductance. Ideal for power applications, it has a max rated current of 0.55A and operates b/w -55°C to 125°C. With a compact size of 12.8mm x 12.8mm x 8mm, it is a general-purpose inductor suitable for various electronic devices.
NLV25T-R47J-PF
NLV25T-R47J-PF by TDK is a 1008-sized fixed inductor with 0.47uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and magnetic shielding, it operates at -40 to 105°C with a max current of 0.35A. Ideal for general purpose use, this SMT inductor has a self-resonance frequency of 350MHz and DC resistance of 0.68 ohm.
DFE252012F-1R0M=P2
Murata Manufacturing's DFE252012F-1R0M=P2 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3.3A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C and features a compact rectangular package (2.5mm x 2mm x 1.2mm).
2124-H-RC
The Bourns 2124-H-RC is a shielded fixed inductor with axial terminal placement. It has a nominal inductance of 1000 uH and max rated current of 1.3 A, making it ideal for high current applications. With a cylindrical package style and horizontal mount construction, this general purpose inductor operates b/w -55 to 105 °C, offering reliable performance in various electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
XAL5050-223MEC
Coilcraft
Coilcraft XAL5050-223MEC is a shielded, surface mount inductor with 22uH nominal inductance and 3.4A max rated current. Ideal for power applications, it operates b/w -40 to 125°C and features a self-resonance frequency of 11MHz.
XAL5030-222MEC
Coilcraft XAL5030-222MEC is a shielded, surface mount inductor with 2.2uH nominal inductance and 9.7A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 38MHz and AEC-Q200 reference standard compliance.
XAL5050-103MEC
Coilcraft XAL5050-103MEC is a shielded, dual-ended fixed inductor with 10uH nominal inductance and 4.9A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C and features a self-resonance frequency of 15MHz.
XAL5030-332MEC
Coilcraft XAL5030-332MEC is a shielded, surface mount inductor with 3.3uH nominal inductance and 8.1A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 28MHz.
XAL5030-332MEB
Coilcraft XAL5030-332MEB is a shielded, surface mount inductor with 3.3uH nominal inductance and 8.1A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C, featuring a self-resonance frequency of 28MHz.
XAL5030-472MEC
Coilcraft XAL5030-472MEC is a shielded, surface mount inductor with 4.7uH nominal inductance and 5.9A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 23MHz and AEC-Q200 reference standard compliance.
XAL5050-103MEB
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
XAL5050-562MEB
XAL5050-682MEC
XAL5030-472MEB
XAL5050-223MEB
XAL5050-562MEC
XAL5050-822MEC
Coilcraft's XAL5050-822MEC is a surface mount, shielded fixed inductor with dual-ended terminals. It has a nominal inductance of 8.2 uH and can handle a max rated current of 6.1 A. This general purpose inductor is commonly used as a power inductor in various applications.
XAL5030-331MEC
Coilcraft XAL5030-331MEC is a shielded, surface mount inductor with 0.33uH nominal inductance and 19.2A max current rating. Ideal for power applications, it operates b/w -40 to 125°C with low DC resistance of 0.00352 ohm.
XAL5050-153MEC
XAL5050-562MED
XAL5030-331MEB
XAL5050-822MEB
XAL5030-122MEB
XAL5030-222MTB
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved