Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Packing Method: TR; Maximum Operating Frequency: 300000 KHz; Dimensions: 6.35mm X 6.1mm X 4.7mm;
Median Price
$6.460
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
100+ parts
1k+ parts
$2.940
10k+ parts
Quantum Digital Technology
-
RF Transformers TTWB-1-CLB attributes and parameters. Explore more RF Transformers devices from Coilcraft
Additional Features:
Application:
Maximum Cutoff Frequency:
Minimum Cutoff Frequency:
Maximum DC Unbalance Current:
Height:
Insertion Loss:
Isolation Voltage:
JESD-609 Code:
Length:
Load Resistance:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Inductance (Primary):
Sub-Category:
Terminal Finish:
Transformer Type:
Width:
TTWB-1-CLB Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
261
Deltrol Controls
Other Relays;
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
AT90CAN128-16AUR
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Diodes Incorporated
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
Boca Semiconductor
1N5819HW-7-F
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
Eic Semiconductor
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
WB1.5-6SLD
Coilcraft
Coilcraft's WB1.5-6SLD RF Transformer offers low 0.26 dB insertion loss, 56 uH primary inductance, and a wide frequency range from 0.05 GHz to 325 MHz. Ideal for surface mount applications in RF circuits, it operates b/w -40°C to 85°C with matte tin finish and nickel barrier for durability.
748412245
Wuerth Elektronik & Kg
Wurth Elektronik 748412245 RF Transformer with 2W power rating, 50Ω impedance, and 2dB insertion loss. Ideal for matching applications with dimensions of 1.6mm x 0.8mm x 0.6mm and operating temperatures from -40°C to 85°C.
Z9314-ALD
Coilcraft's Z9314-ALD RF Transformer features 1.1 dB insertion loss, 4.5 uH primary inductance, and operates b/w -40 to 85 °C. Ideal for applications requiring a min cutoff frequency of 0.35 GHz up to a max of 1700 MHz, this surface mount transformer is packed in TR, EMBOSSED PLASTIC, measuring L6.35xB6.1xH4.83 mm.
HHM1520A2
TDK
The TDK HHM1520A2 RF Transformer has 1 dB insertion loss, operates b/w -40 to 85°C, and supports frequencies from 2300 MHz to 2500 MHz. Ideal for surface mount applications in RF circuits due to its compact dimensions of L2xB1.25xH0.95 mm on reel packaging.
BALF-NRF01D3
STMicroelectronics
STMicroelectronics' BALF-NRF01D3 RF Transformer has 1.46 dB insertion loss, operates b/w -40°C to 85°C, with a cutoff frequency range of 2400 GHz to 2540 MHz. Ideal for surface mount applications in RF circuits due to its compact size and high-frequency capabilities.
PA0908NL
Pulse Electronics
PA0908NL by Pulse Electronics is an RF Transformer with inductance of 216uH, dimensions L29.46xB25.4xH10.2 (mm), and max cutoff frequency of 0.7 MHz. Ideal for applications requiring surface mounting feature, it operates b/w -40 to 125 °C and has a min cutoff frequency of 0.2 GHz.
DXW21BN7511TL
Murata Manufacturing
Murata Manufacturing's DXW21BN7511TL RF Transformer has 1 dB insertion loss, operates b/w -40°C to 85°C, and supports a cutoff frequency range of 50 GHz to 1200 MHz. This surface mount transformer with dimensions of L2.0xB1.2xH1.2 (mm) is ideal for RF applications requiring high-frequency signal transformation.
TM1-0
Synergy Microwave
The Synergy Microwave TM1-0 RF Transformer features 3.4 dB insertion loss, 0.3 GHz min cutoff frequency, and 1000 MHz max cutoff frequency. Ideal for RF applications, this surface mount transformer operates b/w -40°C to 85°C with compact dimensions of L0.15xB0.15xH0.15 mm.
MABA-007159-000000
TE Connectivity
TE Connectivity's MABA-007159-000000 RF Transformer features 3.5 dB Insertion Loss, 4.5 GHz Min Cutoff Freq, and 3000 MHz Max Cutoff Freq. Ideal for applications requiring high-frequency signal transformation in compact spaces with surface mounting feature.
MABACT0059
M/a-com Technology Solutions
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Width: 2.79 mm; Maximum Cutoff Frequency: 3000 MHz; Height: 2.72 mm;
BAL-NRF02D3
BAL-NRF02D3 by STMicroelectronics is a RF transformer with 1.9 dB insertion loss, 2400 GHz min cutoff frequency, and 2540 MHz max cutoff frequency. It is used in surface mount applications for RF signal transformation at temperatures ranging from -40°C to 105°C.
NCR2-183+
Mini-circuits
NCR2-183+ by Mini-circuits is an RF transformer with 2.5 dB insertion loss, operating temperature range of -40 to 85°C, and cutoff frequencies from 12 to 18 GHz. Ideal for surface mount applications in RF circuits requiring precise impedance matching and signal transformation within the specified frequency range.
TC1-1TX+
Mini-circuits TC1-1TX+ RF Transformer has a power rating of 0.25W with 3dB insertion loss. Ideal for signal applications, it operates b/w -40 to 85°C, covering frequencies from 400KHz to 500MHz. Compact at L3.81xB3.81xH4.06mm, it's surface mountable for easy integration in various systems.
WBC16-1TLB
The Coilcraft WBC16-1TLB is a RF transformer with 0.25W power rating, 5uH inductance, and 0.8dB insertion loss. Ideal for isolation applications with 300V isolation voltage, it operates b/w -40 to 85°C and has dimensions of L4.45xB4.19xH3.05mm for surface mounting method.
PWB2010LB
Coilcraft's PWB2010LB RF Transformer offers low insertion loss of 0.2 dB, inductance of 780 uH, and a max cutoff frequency of 125 MHz. Ideal for surface mount applications in RF circuits operating b/w -40 to 85°C with dimensions L6.48xB7.2xH4.45 mm.
ADT1-1WT
The Mini-circuits ADT1-1WT RF Transformer has a power rating of 0.5W, insertion loss of 3dB, and max DC unbalance current of 30mA. Ideal for matching applications with frequency range from 400KHz to 800MHz. Compact dimensions L7.87xB5.59xH2.84 (mm) make it suitable for surface mount installations in various RF systems.
BALF-SPI-02D3
STMicroelectronics' BALF-SPI-02D3 RF Transformer has -3.2 dB Insertion Loss, 434 MHz Max Cutoff Frequency, and operates b/w -40 to 85°C. Ideal for surface mount applications in RF circuits due to its compact size of 2.05mm x 1.45mm x 0.71mm.
Z9314-ALB
Coilcraft's Z9314-ALB RF Transformer offers 1.1 dB insertion loss, 4.5 uH primary inductance, and operates b/w -40 to 85°C. Ideal for applications requiring a min cutoff frequency of 0.35 GHz up to a max of 1700 MHz, this surface mount transformer is designed for high-frequency RF circuits.
TC1-1-13MG2+
Mini-circuits TC1-1-13MG2+ RF Transformer with 0.25W power rating, 50Ω impedance, and 3dB insertion loss. Ideal for signal applications with a frequency range from 4.5KHz to 3GHz. Features gold over nickel terminal finish and surface mounting feature in compact dimensions of L3.81xB3.81xH3.81mm.
TC1-1-13MX+
Mini-circuits TC1-1-13MX+ RF Transformer has 3 dB insertion loss, operates from -40 to 85°C, with cutoff frequencies ranging from 4.5 GHz to 3000 MHz. Ideal for surface mount applications in RF circuits due to its compact dimensions of L3.81xB3.81xH4.06 mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved