Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOW PASS FILTER; Output Impedance (ohm): 50 OHM; Minimum Operating Temperature: -40 Cel; Center/Cutoff Frequency (fo/fc): 30 MHz; JESD-609 Code: e4; Impedance (Input): 50 OHM;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
General Purpose Electronic Filters S3LP306LD attributes and parameters. Explore more General Purpose Electronic Filters devices from Coilcraft
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Terminal Finish:
Width (mm):
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Weitron Technology
Dc Components
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
ERJ6ENF10R0V
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
P7LP-605L
Coilcraft
Coilcraft P7LP-605L is a 9-terminal low pass filter with 6 MHz cutoff frequency and 0.3 dB max insertion loss. Operating b/w -40°C to 85°C, it has matte tin finish and is ideal for general purpose electronic applications requiring impedance of 50 ohms.
PLP-207
Broadcom
LOW PASS FILTER;
HMC881LP5E
Analog Devices
Analog Devices' HMC881LP5E is a 32-terminal low pass filter with a center frequency of 2200 MHz and max insertion loss of 3.8 dB. Operating b/w -40°C to 85°C, it has an input impedance of 50Ω and output impedance of 50Ω, making it ideal for general purpose electronic filtering applications in surface mount setups.
MBC2-0915-025SA
Spectrum Control
BAND PASS FILTER; Output Impedance (ohm): 50 OHM; Dimensions: L7.2XB5.65XH3 (mm)/L0.283XB0.222XH0.118 (inch); Voltage Standing Wave Ratio: 2; Maximum Operating Temperature: 85 Cel; Width (mm): 5.65;
ACPF-7005-BLK
BAND PASS FILTER; Length: 2 mm; Width (mm): 1.6; Maximum Operating Temperature: 85 Cel; No. of Terminals: 3; Impedance (Input): 50 OHM;
ADAQ8088BBCZ
Analog Devices' ADAQ8088BBCZ is a LOW PASS FILTER with 84 terminals, operating from -40 to 85°C. Featuring a Center Frequency of 36 MHz, it has an Input Impedance of 249 OHM//1 pF. Ideal for general purpose electronic filtering applications in surface mount configurations.
ACPF-7025-TR1
BAND PASS FILTER; Width (mm): 2.55; Maximum No. of Sections: 1; Maximum Operating Temperature: 100 Cel; Length: 2.55 mm; Impedance (Input): 50 OHM;
LFB182G45SG9A272
Murata Manufacturing
BAND PASS FILTER; Maximum Insertion Loss: 2.1 dB; Packing Method: TAPE AND REEL; Mounting Type: SURFACE MOUNT; Center/Cutoff Frequency (fo/fc): 2450 MHz; Additional Features: INSERTION LOSS CONSIDERED WITH RESPECT TO TEMPERATURE RANGE -40 TO +85;
LTC1069-6CS8#PBF
LTC1069-6CS8#PBF by Analog Devices is an 8-terminal LOW PASS FILTER with a max frequency of 0.02 MHz. Operating temp range: 0-70 °C, surface mount package, ideal for general purpose electronic filtering applications.
LFB212G45BA1A220
Murata Manufacturing's LFB212G45BA1A220 is a Band Pass Filter with 3.8 dB Max Insertion Loss, 2450 MHz Center Frequency, and -40 to 85°C Operating Temp. Ideal for electronic applications requiring surface mount filters in the 2.4 GHz range.
ACPF-7024
BAND PASS FILTER; No. of Terminals: 3; Length: 2 mm; Maximum Insertion Loss: 3.5 dB; JESD-609 Code: e4; Maximum Operating Temperature: 85 Cel;
HMC898LP4ETR
Analog Devices' HMC898LP4ETR is a 24-terminal BAND PASS FILTER with a center frequency of 16500 MHz and input/output impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for electronic applications requiring precise signal filtering in compact spaces.
LTC1069-6CS8#TRPBF
LTC1069-6CS8#TRPBF by Analog Devices is an 8-terminal LOW PASS FILTER with a max frequency of 0.02 MHz. Operating temperature ranges from 0 to 70 °C, suitable for surface mount applications in general purpose electronic filters. Package dimensions are 3.9mm x 4.9mm x 1.752mm, featuring matte tin terminal finish and plastic material.
HMC1044LP3E
Analog Devices' HMC1044LP3E is a 16-terminal LOW PASS FILTER with a center frequency of 1655 MHz and max insertion loss of 5 dB. Ideal for applications requiring a compact, surface-mount filter with an input impedance of 50Ω, operating b/w -40 °C to 85°C.
HMC891LP5E
Analog Devices' HMC891LP5E is a 32-terminal band pass filter with a center frequency of 2950 MHz and input impedance of 50 ohms. Operating b/w -40°C to 85°C, it handles up to 0.01W power. Ideal for applications requiring surface mount filters in electronic systems.
MLPF-WB-01E3
STMicroelectronics
MLPF-WB-01E3 by STMicroelectronics is a low pass filter ideal for RF applications, featuring a 2450 MHz cutoff frequency and 1.1 dB max insertion loss. It operates b/w -40 °C to 105 °C with a compact size of 1.025 mm x 1.625 mm x 0.425 mm. This surface mount device ensures optimal performance in demanding environments.
LP0FA0600A7TR\250
KYOCERA AVX
LP0805A1747ASTR
KYOCERA AVX LP0805A1747ASTR is a LOW PASS FILTER with 4 terminals. It offers 30 dB attenuation at min frequency of 3495 MHz and 20 dB at max frequency of 5242.5 MHz. Ideal for applications requiring impedance of 50 OHM, such as RF communication systems.
ACPF-7024-BLK
BAND PASS FILTER; Width (mm): 1.6; Packing Method: TAPE; Dimensions: L2.0XB1.6XH0.95 (mm)/L0.079XB0.063XH0.037 (inch); JESD-609 Code: e4; Minimum Operating Temperature: -30 Cel;
ACPF-8040
BAND PASS FILTER; Height: .9 mm; Maximum Insertion Loss: 4.5 dB; Impedance (Input): 50 OHM; Length: 2 mm; Mounting Type: SURFACE MOUNT;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved