Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Coilcraft Q4344-BL is a SMPS transformer with 85uH primary inductance and 500V isolation voltage. It has 3 secondary windings for 12V and 5V outputs, suitable for POWER applications. Operating temperature ranges from -40°C to 85°C, making it ideal for various power supply designs.
Median Price
$7.770
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
< 1k
Coilcraft
1+ parts
$7.230
100+ parts
-
1k+ parts
$3.670
10k+ parts
$2.780
Mouser Electronics
$8.310
$6.260
$5.610
$5.440
Q Components
Nova Conductors
Connector Distribution Corp
Right Parts Inc.
Ampacity Inc.
$5.850
Aranea Global
Perfect Parts
High isolation voltage ensures safety and prevents electrical leakage, making this transformer suitable for high voltage applications.
The high inductance ensures efficient energy transfer and stable performance of the transformer.
Having three secondary windings allows for multiple output voltages, increasing the versatility of the transformer.
Designed specifically for power applications, ensuring optimal performance and reliability.
Can operate at high temperatures without compromising performance, suitable for demanding industrial environments.
Provides a stable 5V output voltage, ideal for powering a variety of electronic devices.
Offers a reliable 12V output, suitable for a wide range of electronic circuits and components.
SMPS Transformers Q4344-BL attributes and parameters. Explore more SMPS Transformers devices from Coilcraft
Application:
Height:
Maximum Input Voltage (V):
Minimum Input Voltage (V):
Isolation Voltage:
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Voltage-1:
Output Voltage-2:
Packing Method:
Dimensions:
Inductance (Primary):
Sub-Category:
Terminal Finish:
Transformer Type:
Width:
Q4344-BL Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
EU2B-YS2J03F
Idec
ROTARY SWITCH;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
FDN5618P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
POE13W2X12-R
Cooper Electronic Technologies
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: POE13W2X12-R; Power Rating: 13 W; Dimensions: 17.1mm X 16.0mm X 8.4mm; Additional Features: TURNS RATIO: 1:0.529:0.647:0.647, SWITCHING FREQUENCY IS 250 KHZ, FLYBACK;
POE300F-12LD
Coilcraft's POE300F-12LD is a 30W SMPS transformer with 3 primary windings at 42uH. It operates b/w -40°C to 125°C, outputting 12V. Ideal for surface mount applications in power over Ethernet systems with input voltage range of 36V to 72V.
ZA9673-BED
ZA9673-BED by Coilcraft is a 12W SMPS Transformer with 2 primary windings, 7uH inductance, and AEC-Q200 approval. It operates b/w -40 to 85°C, has a max input voltage of 42V, and output voltage of 24V. Ideal for surface mount applications in automotive electronics due to its compact size and high power rating.
PA2517NL
Pulse Electronics
PA2517NL by Pulse Electronics is a SMPS transformer with 2 primary windings, inductance of 1200 uH, and dimensions of L18.2xB16.0xH18.0 (mm). It operates b/w -40 to 130 °C and has an output voltage of 12 V. Ideal for applications requiring a max input voltage of 400V, operating at frequencies up to 60 KHz through hole mounting.
C1585-ALD
Coilcraft C1585-ALD is a 13W SMPS transformer with 1500V isolation voltage, 127uH inductance, and 2.6A output current. Ideal for signal applications, it operates b/w -40°C to 85°C with dimensions of 13.46mm x 13.0mm x 12.32mm and a max frequency of 250 KHz.
PL160-100L
Coilcraft PL160-100L is a 160W SMPS transformer with 2 primary windings and inductance of 246uH. It operates b/w -40 to 125°C, suitable for AEC-Q200 applications like automotive power supplies. With dimensions of 23.37x20.83x8.94mm, it supports input voltages from 36V to 72V at frequencies ranging from 200kHz to 700kHz, featuring matte tin finish and surface mounting feature.
YA8916-BLD
Coilcraft's YA8916-BLD is a SMPS transformer with 4.6W power rating, 30uH primary inductance, and 2 secondary windings. Ideal for applications requiring 15V and 8V output voltages, it operates b/w -40°C to 85°C temperatures at frequencies up to 350KHz. Suitable for surface mounting method in compact designs.
750310617
Wuerth Elektronik & Kg
The Wurth Elektronik 750310617 is a SMPS transformer with 1 primary winding and an inductance of 4.5 uH. It has dimensions of L29.08XB23.11XH11.43 (mm) and can operate at temperatures ranging from -40 to 125 °C. This transformer is suitable for applications requiring a min input voltage of 9V and an output voltage of 12V, making it ideal for use in surface mount installations.
ETH1-460LD
Coilcraft's ETH1-460LD is a 120W SMPS transformer with 4 primary windings and an inductance of 350uH. It operates b/w -40°C to 85°C, suitable for various power applications. This surface mount transformer is ideal for compact designs requiring high power density.
FA2636-ALB
Coilcraft's FA2636-ALB is a SMPS transformer with primary inductance of 160uH. It has 2 secondary windings and operates b/w -40°C to 85°C. With output voltage of 5V, it is ideal for surface mount applications in power supplies and converters.
PH0805CNL
PH0805CNL by Pulse Electronics is a SMPS transformer with a power rating of 160W. It has 3 primary windings and an inductance of 327uH. This surface mount transformer is commonly used in applications requiring high frequency operation up to 700KHz.
PA2627NL
PA2627NL by Pulse Electronics is a SMPS transformer with 2 primary windings and inductance of 50.5uH. It operates b/w -40 to 130°C, outputs 3.3V, and supports input voltages from 18-75V. Ideal for surface mount applications with dimensions L13.08xB15.24xH11.45mm and max frequency of 200KHz.
PM2155.011NL
PM2155.011NL by Pulse Electronics is a SMPS transformer with 2 primary windings and 2 secondary windings, offering an inductance of 3200 uH. AEC-Q200 approved, it operates b/w -40 to 125 °C, making it ideal for surface mount applications in automotive electronics.
A0009-ALD
Coilcraft A0009-ALD is a SMPS transformer with 6.6W power rating, 100uH primary inductance, and 3.3V output voltage. Ideal for surface mount applications in devices requiring compact power solutions with input voltage range of 18-55V.
PA2398NLT
PA2398NLT by Pulse Electronics is a SMPS transformer with 2 primary windings and inductance of 100uH. It operates at temperatures ranging from -40 to 130°C, outputting 12V at a max frequency of 250 KHz. Ideal for surface mount applications requiring an input voltage b/w 36-72V.
78253/35MC
Murata Manufacturing
Murata Manufacturing's 78253/35MC is a 0.5W SMPS transformer with primary inductance of 300uH. Operating at -40 to 85°C, it has output voltage of 5V and nominal input voltage of 3.3V. Ideal for surface mount applications with max frequency of 500KHz.
78250JVC-R
Murata Manufacturing's 78250JVC-R is a SMPS transformer with dimensions of 6.35mm x 9mm x 12.7mm for surface mount applications. It offers efficient power conversion, making it ideal for compact electronic devices requiring high-performance transformers in power supplies.
760390015
Wurth Elektronik 760390015 is a SMPS transformer with inductance of 475uH, output voltage of 5V, and operating temperature range from -40 to 125°C. Ideal for applications requiring surface mounting feature, it has approvals including AEC-Q200, CUL, and UL for reliability in automotive and industrial electronics.
MA5519-AL
MA5519-AL by Coilcraft is a SMPS transformer with a power rating of 720W. It has one primary winding with an inductance of 190.8uH and a secondary winding for an output voltage of 12V. This transformer is commonly used in applications such as surface mount power supplies.
PA1837NL
PA1837NL by Pulse Electronics is a SMPS transformer with 3 primary windings and inductance of 4.5uH. It operates b/w -40 to 130°C, outputs 12V, and supports input voltage range of 9-36V. Ideal for surface mount applications with dimensions L29.21xB21.84xH11.43mm and max frequency of 200KHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Q4343-BL
SMPS TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Silver (Sn/Ag) - Tin (Sn); Width: 27.94 mm; Length: 27.94 mm; Inductance (Primary): 85 uH;
Q4344-B
SMPS TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: TURNS RATIO: 1:0.8; 1:0.8; 1:0.35; Height: 24.13 mm; Width: 27.94 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved