Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 8.51 mm; Output Voltage-1: 2.5 V; Minimum Operating Temperature: -40 Cel; Minimum Input Voltage (V): 36;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Q Components
1+ parts
100+ parts
1k+ parts
10k+ parts
SMPS Transformers POE60F-25D attributes and parameters. Explore more SMPS Transformers devices from Coilcraft
Additional Features:
Height:
Maximum Input Voltage (V):
Minimum Input Voltage (V):
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Voltage-1:
Packing Method:
Dimensions:
Power Rating:
Inductance (Primary):
Transformer Type:
Width:
POE60F-25D Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
Synsemi
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
Q4343-BL
Coilcraft
Coilcraft Q4343-BL is a SMPS transformer with 85uH primary inductance and 500V isolation voltage. It has two secondary windings, outputting 12V each, suitable for power applications. With dimensions of L27.94xB27.94xH24.13 mm, it operates b/w -40°C to 85°C temperature range.
LPR6235-253PMLC
Coilcraft's LPR6235-253PMLC is a 25uH SMPS transformer with dimensions of 6.0x6.0x3.5mm, suitable for surface mount applications. It operates b/w -40°C to 85°C, featuring silver palladium platinum terminal finish and comes in tape & reel packaging, ideal for power supply designs.
PA2398NLT
Pulse Electronics
PA2398NLT by Pulse Electronics is a SMPS transformer with 2 primary windings and inductance of 100uH. It operates at temperatures ranging from -40 to 130°C, outputting 12V at a max frequency of 250 KHz. Ideal for surface mount applications requiring an input voltage b/w 36-72V.
760390012
Wuerth Elektronik & Kg
Wurth Elektronik 760390012 is a SMPS transformer with inductance of 475uH, output voltage of 5V, and operating temperature range from -40 to 125°C. Ideal for applications requiring surface mounting feature and nominal input voltage of 5V. AEC-Q200, CUL, UL approved for quality assurance.
C1173-ALB
Coilcraft C1173-ALB is a SMPS transformer with 2 primary windings and 3 secondary windings. It offers an inductance of 166.5 uH, operates b/w -40 to 125 °C, and has dimensions of L17.20xB14.98xH8.51 mm. Ideal for applications requiring an output voltage of 3.3 V, max input voltage of 72 V, and operating frequency up to 500 KHz in surface mount setups.
FA2924-ALD
FA2924-ALD by Coilcraft is a 15W SMPS transformer with primary inductance of 40uH. It has 2 secondary windings, output current of 4.5A, and output voltage of 3.3V, suitable for power applications. Operating temperature ranges from -40 to 85°C, with dimensions L17.75xB13.46xH12.32mm for surface mounting method.
GA3544-BL
Coilcraft GA3544-BL is a 5W SMPS transformer with primary inductance of 2300uH. It operates b/w -40°C to 85°C, featuring Tin/Silver terminal finish. Ideal for power applications requiring compact L21.1xB21.1xH17.3mm dimensions and through-hole mounting.
MA5519-AL
MA5519-AL by Coilcraft is a SMPS transformer with a power rating of 720W. It has one primary winding with an inductance of 190.8uH and a secondary winding for an output voltage of 12V. This transformer is commonly used in applications such as surface mount power supplies.
FL2015-9LD
Coilcraft FL2015-9LD is a 6W SMPS transformer with primary inductance of 22uH. It operates b/w -40 to 85°C, outputting 1600V at max input voltage of 16V. Ideal for surface mount applications up to 100 KHz frequency.
750313734
The Wurth Elektronik 750313734 SMPS Transformer has an inductance of 340uH, output voltage of 5V, and turns ratio of 1:1.1. It is designed for surface mount applications with approvals including AEC-Q200 and UL standards. Ideal for use in electronic devices requiring efficient power conversion within a temperature range of -40 to 125°C.
PA5100.005NLT
PA5100.005NLT by Pulse Electronics is a 27W SMPS Transformer with 2 primary windings at 11uH inductance. It operates b/w -40 to 125 °C and outputs 5V, suitable for surface mount applications up to 200 KHz frequency.
VGT15SEFD-250S4A7
TDK
VGT15SEFD-250S4A7 by TDK is an AEC-Q200 approved SMPS transformer with 2 primary windings at 2.6uH inductance and 4 secondary windings. Operating b/w -40°C to 130°C, it's a surface mount type transformer measuring 23mm x 15.4mm x 12mm, ideal for automotive and industrial applications.
PA5131.005NLT
PA5131.005NLT by Pulse Electronics is a 35W SMPS Transformer with primary inductance of 13uH and two windings. It operates b/w -40°C to 130°C, has output voltages of 5V, and supports up to 200 KHz frequency. Ideal for surface mount applications requiring efficient power conversion.
PL160-104L
Coilcraft PL160-104L is a 160W SMPS transformer with 2 primary windings, inductance of 534uH, and AEC-Q200 approval. Ideal for applications requiring a nominal input voltage of 48V, operating at frequencies b/w 200kHz to 700kHz. Suitable for surface mounting with temperature range from -40°C to 125°C.
POE26W3.3VS5-R
Cooper Industries
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: POE26W3.3VS5-R; Packing Method: REEL; Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO; TURNS RATIO: 1:0.29:0.29:0.83:0.42; Length: 21.5 mm;
ZA9670-BED
ZA9670-BED by Coilcraft is a SMPS Transformer with 11.55W power rating, 9uH primary inductance, and 3.3V output voltage-1. Ideal for applications requiring AEC-Q200 approvals, it operates b/w -40 to 85°C temperatures and supports up to 42V input voltage.
ZA9671-BED
ZA9671-BED by Coilcraft is a 12.5W SMPS Transformer with 2 primary windings at 9uH inductance. It operates b/w -40 to 85°C, outputs 5V at max frequency of 300KHz. Ideal for surface mount applications in automotive electronics due to AEC-Q200 approval and compact size (13.21x10.92x10mm).
7508170310
The Wurth Elektronik 7508170310 SMPS Transformer has an inductance of 1990 uH, output voltage of 12V, and operates b/w -40 to 125 °C. With a height of 11mm and width of 13.8mm, it is ideal for surface mount applications with input voltage ranging from 78V to 375V.
750311308
Wurth Elektronik 750311308 is a SMPS Transformer with inductance of 100uH, output current of 0.5A, and output voltage of 24V. Ideal for power applications, it operates b/w -40 to 125°C temperatures and has dimensions L15.24xB13.34xH11.43mm for surface mounting.
POE30P-50LD
Coilcraft's POE30P-50LD is a 3W SMPS transformer with primary inductance of 310000uH. It features dual windings for 12V and 5V output voltages, suitable for surface mount applications. With dimensions of L10.92xB8.6xH9.02mm, it operates b/w -40 to 85°C and supports frequencies up to 250KHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved