Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver (Sn/Ag); Maximum Operating Temperature: 85 Cel; JESD-609 Code: e2; Dimensions: L15.24XB24.51XH7.87 (mm);
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Ampacity Inc.
1+ parts
$717.000
100+ parts
1k+ parts
10k+ parts
SMPS Transformers FL2015-3LB attributes and parameters. Explore more SMPS Transformers devices from Coilcraft
Additional Features:
Height:
Maximum Input Voltage (V):
JESD-609 Code:
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Voltage-1:
Packing Method:
Dimensions:
Power Rating:
Inductance (Primary):
Terminal Finish:
Transformer Type:
Width:
FL2015-3LB Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Digitron Semiconductors
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
Formosa Microsemi
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
Hi-tron Semiconductor
78253/35JC-R
Murata Power Solutions
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Packing Method: TR, 15 INCH; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 500 KHz;
B0358-CLD
Coilcraft
Coilcraft's B0358-CLD SMPS Transformer offers 2uH primary inductance, operates b/w -40°C to 85°C, and comes in L23.37xB20.57xH9.14 mm dimensions. Ideal for surface mount applications in power supplies and converters due to its compact size and high-quality construction.
B78304B1032A003
The TDK B78304B1032A003 is a SMPS transformer with inductance of 10000 uH, operating temperature range from -40 to 85 °C, and frequency range of 10 KHz to 1600 KHz. It is designed for surface mount applications in power supplies and converters.
PH0801CNLT
Pulse Electronics
PH0801CNLT by Pulse Electronics is a 160W SMPS Transformer with 3 primary windings and inductance of 153uH. Ideal for applications requiring a transformer with surface mounting feature, operating at frequencies ranging from 200KHz to 700KHz. Operating temperatures range from -40°C to 125°C.
PL160-100LD
Coilcraft PL160-100LD is a 160W SMPS transformer with 2 primary windings and inductance of 246uH. It operates b/w -40 to 125°C, suitable for applications requiring a nominal input voltage of 48V. Approved by AEC-Q200, it is designed for surface mounting with a frequency range of 200kHz to 700kHz.
750311715
Wuerth Elektronik & Kg
The Wurth Elektronik 750311715 is a SMPS transformer with 2 primary windings and an inductance of 280 uH. It has 3 secondary windings, with output voltages of 15 V each. This surface mount transformer is suitable for applications requiring a min input voltage of 60V and a max input voltage of 600V.
WA8759-AL
Coilcraft's WA8759-AL is an AEC-Q200 approved SMPS transformer with 1500uH primary inductance. It has 2 secondary windings, operates b/w -40°C to 125°C, and outputs 15V. Ideal for surface mount applications in automotive electronics due to its wide input voltage range of 40V to 1000V.
POE51Q-24ED
Coilcraft's POE51Q-24ED SMPS Transformer has a power rating of 51W, inductance of 22.2uH, and output voltage of 24V. AEC-Q200 approved for automotive applications with operating temperatures from -40 to 125°C. Ideal for surface mounting in various power supply designs.
750342879
750342879 by Wurth Elektronik is an AEC-Q200 approved SMPS Transformer with primary inductance of 200uH. It operates b/w -40 to 125°C, outputting 17V at a nominal input voltage of 5V. Ideal for surface mount applications due to its compact size of 9.14x8x7.62mm.
750315240
750315240 by Wurth Elektronik is a SMPS Transformer with 440uH primary inductance, 5V output voltage-1, and -40 to 125°C operating temperature range. Ideal for surface mount applications in automotive electronics, power supplies, and industrial equipment.
760390014
Wurth Elektronik 760390014 SMPS Transformer with 475uH primary inductance, 5V output voltage, and operating freq. range of 300-620 KHz. AEC-Q200 approved for automotive applications, UL/CUL certified for safety compliance. Ideal for surface mount PCB designs in automotive electronics requiring high efficiency power conversion.
PA5130.001NLT
PA5130.001NLT by Pulse Electronics is a 25W SMPS Transformer with 2 primary windings at 80uH inductance. It operates b/w -40 to 125°C, outputting dual voltages of 3.3V each. Ideal for surface mount applications with a max frequency of 200 KHz.
WA8515-ALD
Coilcraft's WA8515-ALD is a 25W SMPS transformer with 2 primary windings at 90uH. It operates b/w -40°C to 85°C, suitable for applications requiring a 5V output voltage and up to 57V input voltage. Ideal for surface mounting in power supply designs up to 250 KHz frequency.
POE13F-12LD
Coilcraft's POE13F-12LD is a 13W SMPS transformer with primary inductance of 35uH. It features 3 primary windings and 2 secondary windings, suitable for applications requiring an output voltage of 12V. With dimensions of L17.2xB14.98xH8.51mm, it operates b/w -40 to 125°C and supports a max input voltage of 72V at a frequency up to 250 KHz, making it ideal for surface mounting in power supply circuits.
750311692
Wurth Elektronik 750311692 is a DATACOM TRANSFORMER with primary inductance of 80uH. It has two secondary windings, output voltages of ±150V, and operates b/w -40°C to 125°C. Ideal for SMPS applications due to its compact dimensions (L9.78xB9.14xH10.54 mm) and surface mounting feature.TR, EMBOSSED PLASTIC packing method makes it suitable for various electronic devices requiring an input voltage range of 8-15V.
YA9037-ALD
Coilcraft's YA9037-ALD is a 6W SMPS Transformer with primary inductance of 25.6uH, suitable for applications requiring an output voltage of 48V. With a temperature range from -40 to 85°C, it features surface mounting and is ideal for compact power supply designs.
PA0806NL
PA0806NL by Pulse Electronics is a 140W SMPS Transformer with primary inductance of 153uH. It has two windings for both primary and secondary, operating at frequencies from 200KHz to 700KHz. Ideal for surface mount applications in power supplies, it operates b/w -40°C to 125°C temperature range.
78250JC
Murata Manufacturing
Murata Manufacturing's 78250JC is a SMPS Transformer with dimensions of 6.35mm x 9mm x 12.7mm, suitable for surface mount applications. It offers efficient power conversion in compact spaces, making it ideal for various electronic devices requiring high-performance transformers.
C1585-ALD
Coilcraft C1585-ALD is a 13W SMPS transformer with 1500V isolation voltage, 127uH inductance, and 2.6A output current. Ideal for signal applications, it operates b/w -40°C to 85°C with dimensions of 13.46mm x 13.0mm x 12.32mm and a max frequency of 250 KHz.
POE40Q-24ED
Coilcraft's POE40Q-24ED is a 40W SMPS transformer with 27.8uH primary inductance, AEC-Q200 approval, and 24V output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and surface mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved