Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: SILVER PALLADIUM PLATINUM; No. of Functions: 1; Application: GATE DRIVE; Isolation Voltage: 1500 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Pulse & Datacom Transformers DA2317-ASD attributes and parameters. Explore more Pulse & Datacom Transformers devices from Coilcraft
Additional Features:
Application:
Minimum ET Product:
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
DA2317-ASD Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
2N7002,215
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
Taiwan Semiconductor
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
Toshiba
EU2B-YS3203F
Idec
ROTARY SWITCH;
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
IT245
Schaffner Holding Ag
IT245 by Schaffner Holding Ag is a UL-approved pulse transformer with 750V isolation voltage, 1200 ns max pulse rise time, and 8000 uH primary inductance. Ideal for applications requiring high-frequency data transmission and precise signal isolation in compact spaces. Dimensions: L17.6xB16.7xH11.3 mm, operating temp -25 to 70 °C, freq range 40 kHz to 500 kHz.
14255R-400
Renesas Electronics
DATACOM TRANSFORMER;
H5007NL
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Height: 5.51 mm; Application: 1000 BASE-T;
SM13072APEL
Bourns
SM13072APEL by Bourns is a DATACOM TRANSFORMER with 1500V isolation voltage, 350uH inductance, and AEC-Q200 approval. Ideal for 10/100 BASE-T, ETHERNET, and LAN applications due to its compact L12.8xB6.9xH5.65mm size and surface mounting feature. Operating temperature ranges from -40°C to 125°C.
1000B-5002XNL
Pulse Electronics
1000B-5002XNL by Pulse Electronics is a Datacom Transformer with 8 functions, inductance of 350uH, and dimensions L17.53xB12.19xH5.72 (mm). Ideal for 10/100/1000 BASE-T applications, it operates b/w -55 to 125 °C and features surface mounting method.
TG1G-S002NZRL
Halo Electronics
TG1G-S002NZRL by Halo Electronics is a DATACOM TRANSFORMER with 4 functions, 1500V isolation voltage, and 350uH inductance. Ideal for 10/100 BASE-TX Ethernet applications with operating temperatures from 0 to 70°C. Compact surface mount design measuring 5.84mm x 12.19mm x 17.18mm.
760390011
Wuerth Elektronik & Kg
Wurth Elektronik 760390011 is a DATACOM TRANSFORMER with 1500V isolation voltage, 1000uH inductance, and 7 V-us min ET product. Ideal for LAN and RS-232 DATA INTERFACE applications, it operates b/w -40 to 125 °C with Tin/Silver terminal finish.
S5394-CLD
Coilcraft
Coilcraft's S5394-CLD is a pulse transformer with 1500V isolation voltage, 400uH primary inductance, and 32 V-us min ET product. Ideal for gate drive applications, this surface mount transformer operates b/w -40 to 85°C with a compact size of L6.99xB6.6xH5.46 mm.
PM-DB27408
Holt Integrated Circuits
PM-DB27408 by Holt Integrated Circuits is a DATACOM TRANSFORMER with MIL-STD-1553 approval. It has dimensions of L23.62xB10.92xH3.937 mm and operates b/w -55 to 130 °C. Ideal for DATA BUS INTERFACE, it features a turns ratio of 1:2.5 and is THROUGH HOLE MOUNTED for easy installation.
H1102
H1102 by Pulse Electronics is a Datacom Transformer with 1:1 Turns Ratio. It has an Isolation Voltage of 1500V and operates b/w 0-70°C. Ideal for 10/100 BASE-T applications, it comes in Tube packing and features Surface mounting method.
PM-DB2776
PM-DB2776 by Holt Integrated Circuits is a MIL-STD-1553 approved DATACOM TRANSFORMER for DATA BUS INTERFACE. With a temperature range of -55 to 130°C, it features turns ratios of 1:2.5 and 1:1.79. This surface mount transformer measures 17.145mm x 10.16mm x 4.699mm, making it ideal for various data communication applications.
Q4470-B
Coilcraft's Q4470-B is a DATACOM transformer with 1500V isolation voltage, 400uH inductance, and 27 V-us min ET product. Ideal for RS-232 data interfaces, it operates b/w -40°C to 85°C and comes in tape & reel packing.
H1187NL
H1187NL by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage. It is designed for Ethernet applications like 10/100 BASE-TX, featuring dimensions of L7.62xB7.0xH6.35 mm and matte tin terminal finish. Operating temperature ranges from 0 to 70°C, suitable for surface mount installation in various electronic devices.
EPA4271GE-LF
Pca Electronics
EPA4271GE-LF by Pca Electronics is a Pulse Transformer with 1500V isolation voltage, 785uH inductance, and 9.7 V-us min ET product. Ideal for GATE DRIVE applications, it operates b/w -40 to 85 °C and comes in L8.64XB6.73XH2.49 mm dimensions for surface mount assembly.
HX1198FNLT
HX1198FNLT by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and -40 to 85°C operating temperature range. It is ideal for surface mount applications in data communication and pulse transformer circuits.
TST-9007
Data Device
TST-9007 by Data Device is a DATACOM TRANSFORMER with Impedance of 3000Ω, Isolation Voltage of 100V, and Max Pulse Rise Time of 200ns. Ideal for applications requiring THROUGH HOLE MOUNTED transformers with load resistance of 4Ω and turns ratio options of 1:2.5 or 1:1.79.
7490120110
7490120110 by Wurth Elektronik is a Pulse & Datacom Transformer with 1500V isolation voltage, 350uH inductance, and dimensions of L12.7xB9.27xH5.8 (mm). Ideal for applications like 10/100 BASE-TX, AUTOMDIX, and LAN due to its surface mount feature and turns ratio of 1CT:1CT. Operating temperature ranges from -40°C to 85°C.
TG110-E050N5LFTR
TG110-E050N5LFTR by Halo Electronics is a DATACOM TRANSFORMER with 1500V isolation voltage, 1CT:1CT turns ratio, and dimensions of L12.7xB7.11xH6.35 mm. Ideal for 10/100 BASE-TX applications, it operates b/w -40 to 85°C and features surface mounting method.
ALANS100X1-1E10LT
ALANS100X1-1E10LT by Abracon is a DATACOM TRANSFORMER with 2500V isolation voltage, 350uH inductance, and IEEE approval. Ideal for LAN, 10/100 BASE-TX, and Ethernet applications due to its compact size (5x11.7x14.8mm) and surface mounting feature. Operating temperature range from -55°C to 125°C ensures reliable performance in various environments.
ALT3232M-151-T001
TDK
ALT3232M-151-T001 by TDK is a 150 uH inductance pulse transformer for LAN applications. With dimensions of L3.2xB3.2xH2.8 mm, it operates b/w -40 to 85 °C and has a turns ratio of 1CT:1CT. This surface mount transformer is ideal for 10/1000 BASE-T and 100 BASE-TX networks.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved