Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Terminal Finish: Tin/Silver - Matte Tin - with Nickel barrier; Maximum Operating Temperature: 125 Cel; Load Resistance: .8 ohm;
Median Price
$3.080
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Coilcraft
1+ parts
$1.890
100+ parts
-
1k+ parts
$1.320
10k+ parts
$0.890
Farnell
$1.690
$1.410
$1.350
Element14
$4.380
$3.060
$2.540
Current Sense Transformers CST2010-030LB attributes and parameters. Explore more Current Sense Transformers devices from Coilcraft
Approvals (V):
Minimum ET Product:
Height:
Length:
Load Resistance:
Mounting Feature:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Primary Current (Peak):
Type (Primary):
Inductance (Secondary):
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
CST2010-030LB Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
Central Semiconductor
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
53070C
C&d Technologies
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 5300; Terminal Finish: Tin (Sn); Turns Ratio (Np:Ns): 1:70; Additional Features: LENGTH & HEIGHT DIM INCLUDE TERMINAL ALSO;
P8224
Pulse Electronics
P8224 by Pulse Electronics is a WOUND PRIMARY current sense transformer with 10A peak primary current. It has dimensions of L8.38XB7.21XH4.83 (mm) and inductance of 320uH, suitable for surface mount applications in circuits operating b/w -40 to 130 °C at frequencies from 50 KHz to 1000 KHz.
PE-63588NL
PE-63588NL by Pulse Electronics is a wound primary current sense transformer with 3750V isolation voltage. It has a max DC unbalance current of 20A and inductance of 80mH. Ideal for power applications, it operates b/w -40°C to 125°C and features through-hole mounting at L22.86xB17.78xH17.78mm dimensions.
CST-1020
Triad Magnetics
CST-1020 by Triad Magnetics is a BAR PRIMARY current sense transformer with 20A peak primary current and 20000mA max DC unbalance current. It has dimensions of L23.5xB12.0xH24.8 (mm) and is ideal for SIGNAL applications at a nominal operating frequency of 50/60Hz. The transformer features a turns ratio of 1000:1, THROUGH HOLE MOUNTED mounting feature, and operates within a frequency range of 0.05-0.06 KHz.
5352
Api Technologies
5352 by Api Technologies is a BAR PRIMARY type current sense transformer with peak primary current of 10A. It has dimensions of 26.924mm x 14.224mm and nominal input voltage of 1.41V, suitable for applications requiring precise current sensing in circuits up to 100KHz frequency range.
CR8348-2000-D
Cr Magnetics
CR8348-2000-D by Cr Magnetics is a BAR PRIMARY current sense transformer with 50A peak primary current. It has approvals from CUL and UL, operates at frequencies b/w 0.02 KHz to 1 KHz, and features through-hole mounting. Ideal for applications requiring precise current sensing in compact spaces.
CST1211-050LD
CST1211-050LD by Coilcraft is a WOUND PRIMARY current sense transformer with 28A peak primary current, 1700uH secondary inductance, and 1:50 turns ratio. Ideal for AEC-Q200 approved applications requiring high accuracy current sensing at temperatures ranging from -40 to 125°C.
54050C
Murata Manufacturing
Murata Manufacturing's 54050C is a WOUND PRIMARY current sense transformer with peak primary current of 15A. Measuring L10.8xB9.0xH8.2 (mm), it has Tin terminal finish and load resistance of 0.5 ohm. Ideal for surface mount applications, it offers a turns ratio of 1:1:50, making it suitable for precise current sensing in various electronic devices.
B82801B0984A070
TDK
The TDK B82801B0984A070 is a WOUND PRIMARY current sense transformer with 20A peak primary current and 980uH secondary inductance. Ideal for applications requiring precise current sensing at frequencies ranging from 50kHz to 1MHz, it features a compact size of L8.38xB7.11xH5.08mm and can operate b/w -40°C to 125°C temperatures.
Murata Manufacturing's 53070C is a WOUND PRIMARY current sense transformer with peak primary current of 10A. Measuring 5.4mm in height, 7.2mm in width, and 8.3mm in length, it has load resistance of 4.5Ω. Ideal for surface mount applications requiring precise current sensing capabilities.
CST2-100LC
CST2-100LC by Coilcraft is a WOUND PRIMARY current sense transformer with 2000 uH inductance. It has an isolation voltage of 500 V and peak primary current of 20 A, making it suitable for SIGNAL applications. With dimensions L6.22XB5.97XH5.3 (mm) and operating temperature range from -40 to 125 °C, it offers precise current sensing in compact designs up to 1000 KHz frequency.
CR8348-2000-F
CR8348-2000-F by Cr Magnetics is a BAR PRIMARY current sense transformer with 50A peak primary current. It operates b/w -40 to 65°C, suitable for applications requiring through hole mounting and load resistance of 88Ω. Approved by CUL and UL, it functions from 0.02 to 200 KHz frequencies.
5313
CURRENT SENSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Length: 55.58 mm; Load Resistance: 100 ohm; Maximum Operating Frequency: 100 KHz; Height: 55.58 mm;
54200C
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 5400; Terminal Finish: Tin (Sn); Inductance (Secondary): 60000 uH; Maximum Operating Frequency: 500 KHz;
749251060
Wuerth Elektronik & Kg
749251060 by Wurth Elektronik is a WOUND PRIMARY current sense transformer with an isolation voltage of 500V and inductance of 720uH. It has a primary current peak of 20A, output current of 10A, and dimensions L7.7xB6.9xH5.33 (mm). Ideal for POWER applications, it operates b/w -40 to 125 °C with a max frequency of 1000 KHz.
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 5400; Terminal Finish: Tin (Sn); Maximum Operating Frequency: 500 KHz; Packing Method: TAPE & REEL;
FIS125NL
FIS125NL by Pulse Electronics is a WOUND PRIMARY current sense transformer with 25A peak primary current and 76000uH secondary inductance. It operates at -40 to 125 °C, ideal for through-hole mounting applications requiring high accuracy in measuring current up to 500 KHz frequency.
53040C
Murata Manufacturing's 53040C is a WOUND PRIMARY current sense transformer with 10A peak primary current. Measuring 5.4mm in height, 7.2mm in width, and 8.3mm in length, it has a turns ratio of 1:40 and load resistance of 1.1Ω. Ideal for surface mount applications requiring precise current sensing capabilities.
PB0026NLT
PB0026NLT by Pulse Electronics is a WOUND PRIMARY current sense transformer with 35A peak primary current. It has dimensions of L14.22xB13.46xH10.16 (mm) and inductance of 5600uH, suitable for surface mount applications in the temperature range of -40 to 130°C at frequencies up to 500 KHz.
CST2020-100L
Coilcraft CST2020-100L is a WOUND PRIMARY current sense transformer with 1:100 turns ratio. It has a peak primary current of 40A and inductance of 7070uH. Ideal for applications requiring high accuracy current sensing at frequencies up to 1.3KHz, such as automotive electronics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved