Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Terminal Finish: Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier; Type (Primary): WOUND PRIMARY; Isolation Voltage: 500 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Current Sense Transformers CST2-100SB attributes and parameters. Explore more Current Sense Transformers devices from Coilcraft
Additional Features:
Application:
Approvals (V):
Minimum ET Product:
Height:
Isolation Voltage:
JESD-609 Code:
Length:
Load Resistance:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Primary Current (Peak):
Dimensions:
Inductance (Primary):
Type (Primary):
Inductance (Secondary):
Sub-Category:
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
CST2-100SB Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bkc Semiconductors
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Good-ark Electronics
PIC18F4550-I/P
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
EU2B-YS3203C
Idec
ROTARY SWITCH;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
Toshiba
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CT100-2
Micro Electronics
Micro Electronics CT100-2 is a BAR PRIMARY current sense transformer with peak primary current of 20A. It has dimensions of L18xB11xH20.1 (mm) and load resistance of 100Ω. Ideal for applications requiring through hole mounting, operating at frequencies up to 50 KHz.
PB0026NLT
Pulse Electronics
PB0026NLT by Pulse Electronics is a WOUND PRIMARY current sense transformer with 35A peak primary current. It has dimensions of L14.22xB13.46xH10.16 (mm) and inductance of 5600uH, suitable for surface mount applications in the temperature range of -40 to 130°C at frequencies up to 500 KHz.
CR8348-2000
Cr Magnetics
CR8348-2000 by Cr Magnetics is a BAR PRIMARY current sense transformer with 50A peak primary current. It operates b/w -40 to 85°C, suitable for applications requiring through hole mounting and load resistance of 106Ω. Approved by CUL and UL, it functions at frequencies from 0.02 to 1 KHz.
38620
Pico Electronics
CURRENT SENSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-27; Width: 13.97 mm; Height: 6.35 mm; Type (Primary): WOUND PRIMARY;
CST2-100LC
Coilcraft
CST2-100LC by Coilcraft is a WOUND PRIMARY current sense transformer with 2000 uH inductance. It has an isolation voltage of 500 V and peak primary current of 20 A, making it suitable for SIGNAL applications. With dimensions L6.22XB5.97XH5.3 (mm) and operating temperature range from -40 to 125 °C, it offers precise current sensing in compact designs up to 1000 KHz frequency.
5382
Api Technologies
5382 by Api Technologies is a BAR PRIMARY current sense transformer with peak primary current of 120A. It features dimensions of L38.1xB14.22xH38.1mm and load resistance of 1Ω, suitable for through hole mounting applications in various electronic devices.
53070C
Murata Manufacturing
Murata Manufacturing's 53070C is a WOUND PRIMARY current sense transformer with peak primary current of 10A. Measuring 5.4mm in height, 7.2mm in width, and 8.3mm in length, it has load resistance of 4.5Ω. Ideal for surface mount applications requiring precise current sensing capabilities.
FIS125NL
FIS125NL by Pulse Electronics is a WOUND PRIMARY current sense transformer with 25A peak primary current and 76000uH secondary inductance. It operates at -40 to 125 °C, ideal for through-hole mounting applications requiring high accuracy in measuring current up to 500 KHz frequency.
54050C
Murata Manufacturing's 54050C is a WOUND PRIMARY current sense transformer with peak primary current of 15A. Measuring L10.8xB9.0xH8.2 (mm), it has Tin terminal finish and load resistance of 0.5 ohm. Ideal for surface mount applications, it offers a turns ratio of 1:1:50, making it suitable for precise current sensing in various electronic devices.
PA1005.100NL
PA1005.100NL by Pulse Electronics is a WOUND PRIMARY current sense transformer with 500V isolation voltage and 20A output current. Ideal for POWER applications, it operates b/w -40 to 130 °C with dimensions of L8.38XB7.21XH4.83 mm, offering inductance of 2000 uH and turns ratio of 1:100.
FIS115NL
FIS115NL by Pulse Electronics is a WOUND PRIMARY current sense transformer with 25A peak primary current, 18000uH secondary inductance, and 1:100 turns ratio. Ideal for applications requiring precise current sensing in circuits operating up to 500KHz frequency.
CST7030-050LC
CST7030-050LC by Coilcraft is a WOUND PRIMARY current sense transformer with 20A peak primary current and 333uH secondary inductance. It operates b/w -40 to 125°C, suitable for applications requiring precise current sensing at frequencies up to 1MHz, such as power supplies and motor control systems.
CSE187L-P
Triad Magnetics
CSE187L-P by Triad Magnetics is a WOUND PRIMARY current sense transformer with 4000V isolation voltage. It has an output current of 30A and dimensions of L22.22xB22.22xH18.29 (mm). Ideal for SIGNAL applications, it operates b/w -40 to 105 °C with a turns ratio of 1:500 at a max frequency of 0.4 KHz.
CS4200V-01L
CS4200V-01L by Coilcraft is a WOUND PRIMARY current sense transformer with UL approval. It has a primary peak current of 35A, inductance of 80000uH, and operates b/w -40 to 85°C. Ideal for applications requiring precise current sensing at frequencies up to 1MHz.
56T200C
Murata Manufacturing's 56T200C is a BAR PRIMARY type current sense transformer with peak primary current of 10A. It has dimensions of 20.19mm x 8.89mm x 16.79mm and load resistance of 2.81Ω, suitable for through hole mounting applications in various electronic devices.
5313
CURRENT SENSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Length: 55.58 mm; Load Resistance: 100 ohm; Maximum Operating Frequency: 100 KHz; Height: 55.58 mm;
ACST-261-1
American Zettler
American Zettler's ACST-261-1 is a WOUND PRIMARY current sense transformer with inductance of 2400000 uH. It operates b/w -40 to 70 °C and has a turns ratio of 1:1000. Ideal for applications requiring precise current sensing at frequencies ranging from 0.05 to 0.2 KHz.
P8208NLT
Pulse Electronics P8208NLT is a WOUND PRIMARY current sense transformer with 10A peak primary current. It has inductance of 2000uH, operates b/w -40 to 130°C, and supports frequencies from 20kHz to 1MHz. Ideal for surface mount applications in electronic circuits requiring precise current sensing.
CST2-070LC
CST2-070LC by Coilcraft is a WOUND PRIMARY current sense transformer with 980uH inductance, 20A primary current peak, and 500V isolation voltage. Ideal for SIGNAL applications, it operates b/w -40 to 125°C with a frequency range of 13KHz to 1MHz.
AS-101
Nuvotem Talema
AS-101 by Nuvotem Talema is a BAR PRIMARY current sense transformer with inductance of 25000 uH. It operates b/w -40 to 120 °C and has a turns ratio of 1:100. Ideal for applications requiring precise current sensing at frequencies ranging from 20 KHz to 200 KHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved