Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3; Inductance (Primary): 3000 uH;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Current Sense Transformers CST1-125LD attributes and parameters. Explore more Current Sense Transformers devices from Coilcraft
Additional Features:
Application:
Approvals (V):
Minimum ET Product:
Height:
Isolation Voltage:
JESD-609 Code:
Length:
Load Resistance:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Primary Current (Peak):
Dimensions:
Inductance (Primary):
Type (Primary):
Inductance (Secondary):
Sub-Category:
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
CST1-125LD Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
Gec Plessey Semiconductors
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
Eic Semiconductor
Fagor Electronica S Coop
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
Daco Semiconductor
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CST2-070LC
Coilcraft
CST2-070LC by Coilcraft is a WOUND PRIMARY current sense transformer with 980uH inductance, 20A primary current peak, and 500V isolation voltage. Ideal for SIGNAL applications, it operates b/w -40 to 125°C with a frequency range of 13KHz to 1MHz.
P8204
Pulse Electronics
Pulse Electronics P8204 is a WOUND PRIMARY current sense transformer with 10A peak primary current. It has dimensions of L8.38XB7.21XH5.5 (mm) and inductance of 320uH, suitable for surface mount applications in circuits requiring precise current sensing up to 1000KHz frequency range.
FIS115NL
FIS115NL by Pulse Electronics is a WOUND PRIMARY current sense transformer with 25A peak primary current, 18000uH secondary inductance, and 1:100 turns ratio. Ideal for applications requiring precise current sensing in circuits operating up to 500KHz frequency.
CST4835-150EB
Coilcraft's CST4835-150EB is a WOUND PRIMARY current sense transformer with AEC-Q200 approval. It has a primary peak current of 7A, inductance of 1800uH, and operates b/w -40 to 125°C. Ideal for applications requiring precise current sensing in automotive electronics due to its compact size and high-frequency capabilities up to 1MHz.
53040C
C&d Technologies
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 5300; Terminal Finish: Tin (Sn); Turns Ratio (Np:Ns): 1:40; Additional Features: LENGTH & HEIGHT DIM INCLUDE TERMINAL ALSO;
P8224
P8224 by Pulse Electronics is a WOUND PRIMARY current sense transformer with 10A peak primary current. It has dimensions of L8.38XB7.21XH4.83 (mm) and inductance of 320uH, suitable for surface mount applications in circuits operating b/w -40 to 130 °C at frequencies from 50 KHz to 1000 KHz.
CU8965-ALD
CU8965-ALD by Coilcraft is a WOUND PRIMARY current sense transformer with 20A peak primary current, 1330uH secondary inductance, and 1:100 turns ratio. Ideal for AEC-Q200 approved applications requiring high accuracy current sensing at temperatures ranging from -40 to 125°C.
CR8350-2000
Cr Magnetics
CR8350-2000 by Cr Magnetics is a BAR PRIMARY current sense transformer with 800A peak primary current. Operating temperature ranges from -40 to 85°C, suitable for 0.02-1 KHz frequency applications. Through hole mounted, it measures 39x14x37.5mm and is ideal for various industrial monitoring systems.
PB0026NLT
PB0026NLT by Pulse Electronics is a WOUND PRIMARY current sense transformer with 35A peak primary current. It has dimensions of L14.22xB13.46xH10.16 (mm) and inductance of 5600uH, suitable for surface mount applications in the temperature range of -40 to 130°C at frequencies up to 500 KHz.
749251070
Wuerth Elektronik & Kg
749251070 by Wurth Elektronik is a WOUND PRIMARY current sense transformer with 500V isolation voltage and 980uH inductance. Ideal for POWER applications, it has a peak primary current of 20A, output current of 10A, and operates b/w -40 to 125°C temperatures.
Murata Manufacturing
Murata Manufacturing's 53040C is a WOUND PRIMARY current sense transformer with 10A peak primary current. Measuring 5.4mm in height, 7.2mm in width, and 8.3mm in length, it has a turns ratio of 1:40 and load resistance of 1.1Ω. Ideal for surface mount applications requiring precise current sensing capabilities.
CST1211-200LD
CST1211-200LD by Coilcraft is a WOUND PRIMARY current sense transformer with 1:200 turns ratio. It has a peak primary current of 28A, inductance of 32000uH, and operates b/w -40 to 125°C. Ideal for AEC-Q200 approved applications requiring precise current sensing at frequencies up to 1000KHz.
56T200C
Murata Manufacturing's 56T200C is a BAR PRIMARY type current sense transformer with peak primary current of 10A. It has dimensions of 20.19mm x 8.89mm x 16.79mm and load resistance of 2.81Ω, suitable for through hole mounting applications in various electronic devices.
PE-68280NLT
PE-68280NLT by Pulse Electronics is a WOUND PRIMARY current sense transformer with 15A peak primary current. It has dimensions of L12.57xB12.45xH7.11 (mm) and inductance of 14800uH, suitable for surface mount applications at temperatures ranging from -40 to 130 °C.
5383
Api Technologies
Api Technologies' 5383 is a BAR PRIMARY current sense transformer with peak primary current of 100A. Measuring L60.2xB19.05xH60.2 mm, it has load resistance of 5Ω and mounts through hole. Ideal for applications requiring precise current sensing in compact spaces.
PA1005.100NL
PA1005.100NL by Pulse Electronics is a WOUND PRIMARY current sense transformer with 500V isolation voltage and 20A output current. Ideal for POWER applications, it operates b/w -40 to 130 °C with dimensions of L8.38XB7.21XH4.83 mm, offering inductance of 2000 uH and turns ratio of 1:100.
54050C
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 5400; Terminal Finish: Tin (Sn); Maximum Operating Frequency: 500 KHz; Packing Method: TAPE & REEL;
PA1005.100NLT
PA1005.100NLT by Pulse Electronics is a WOUND PRIMARY current sense transformer with 20A peak primary current and 2000uH secondary inductance. Ideal for applications requiring surface mount transformers, it operates b/w -40 to 130°C temperatures at frequencies ranging from 20kHz to 1MHz.
5382
5382 by Api Technologies is a BAR PRIMARY current sense transformer with peak primary current of 120A. It features dimensions of L38.1xB14.22xH38.1mm and load resistance of 1Ω, suitable for through hole mounting applications in various electronic devices.
CT100-2
Micro Electronics
Micro Electronics CT100-2 is a BAR PRIMARY current sense transformer with peak primary current of 20A. It has dimensions of L18xB11xH20.1 (mm) and load resistance of 100Ω. Ideal for applications requiring through hole mounting, operating at frequencies up to 50 KHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved