Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Inductance (Primary): 256 uH; Minimum ET Product: 18 V-us; Minimum Operating Temperature: -40 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Pulse & Datacom Transformers CR7983-CLB attributes and parameters. Explore more Pulse & Datacom Transformers devices from Coilcraft
Application:
Minimum ET Product:
Height:
Nominal Input Voltage (V):
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
CR7983-CLB Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
261
Deltrol Controls
Other Relays;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
Plessey Semiconductors Discrete Components Div
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
2N7002
Other Transistors;
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
78250MVC-R
Murata Manufacturing
Murata's 78250MVC-R is a DATACOM TRANSFORMER with 1000uH inductance, UL approval, and 4000V isolation voltage. Ideal for RS-232 DATA INTERFACE applications, it operates b/w -40 to 85°C temperatures. Dimensions are L9.0xB9.52xH6.35 mm with matte tin finish and surface mount feature.
TG1G-E001NYLF
Halo Electronics
TG1G-E001NYLF by Halo Electronics is a DATACOM TRANSFORMER with 4 functions, 1500V isolation voltage, and 350uH inductance. Ideal for 10/100 BASE-TX and ETHERNET applications, it operates b/w -40 to 85 °C with surface mount feature.
1080
Newport Components
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Dimensions: 15.06mm X 15.06mm X 15.75mm; Maximum Operating Temperature: 70 Cel;
74020
Pico Electronics
The Pico Electronics 74020 pulse transformer features an isolation voltage of 500V, inductance of 2400uH, and min ET product of 40V-us. Ideal for datacom applications, this through-hole mounted transformer operates b/w -55°C to 130°C with dimensions of L11.43xB11.43xH7.11mm.
ITRA-0239-D502
Schurter Ag
Schurter Ag's ITRA-0239-D502 is a Pulse Transformer with 3200V Isolation Voltage, 100ns Max Pulse Rise Time, and 2200uH Primary Inductance. Ideal for applications requiring high voltage isolation and fast pulse rise times in compact spaces.
TG10G-RP02NJLF
TG10G-RP02NJLF by Halo Electronics is a pulse & datacom transformer with 4 functions. It has an isolation voltage of 1500V and dimensions of L13.84XB12.19XH6.35 (mm). This transformer is used in applications such as 10G BASE-T and Ethernet, with a max operating temperature of 70°C and min operating temperature of 0°C.
1000B-5002XNL
Pulse Electronics
1000B-5002XNL by Pulse Electronics is a Datacom Transformer with 8 functions, inductance of 350uH, and dimensions L17.53xB12.19xH5.72 (mm). Ideal for 10/100/1000 BASE-T applications, it operates b/w -55 to 125 °C and features surface mounting method.
74015
The Pico Electronics 74015 is a pulse transformer with an isolation voltage of 500V and inductance of 1300uH. It is approved for MIL-PRF-21038 and commonly used in pulse and datacom applications.
P0544NLT
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Length: 9 mm; Additional Features: LENGTH AND BREADTH DIMENSION INCLUDES TERMINAL ALSO; Isolation Voltage: 1500 V;
749010011
Wuerth Elektronik & Kg
Wurth Elektronik 749010011 is a UL approved datacom transformer with 1500V isolation voltage and 350uH primary inductance. It is designed for LAN applications supporting 10/100 BASE-TX, with dimensions of 12.7mm x 6.855.08mm and operating temperatures ranging from 0 to 70°C.
100B-1003XT
Inrcore
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN LEAD; Packing Method: TR; Dimensions: L12.7XB6.73XH5.97 (mm); Maximum Operating Temperature: 125 Cel;
DA101JC
Murata Manufacturing's DA101JC is a Pulse & Datacom Transformer with 2000V isolation voltage, 1000uH inductance, and 15 V-us min ET product. Ideal for data transmission applications, it operates b/w -40 to 85 °C and features surface mounting at dimensions of 9x6.35x9.52 mm.
1001C
Murata Power Solutions
PULSE TRANSFORMER; Mounting Feature: PCB MOUNT; Maximum Operating Temperature: 70 Cel; Height: 15.75 mm; Turns Ratio (Np:Ns): 1:1; Minimum ET Product: 200 V-us;
IT314
Schaffner Holding Ag
IT314 by Schaffner Holding Ag is a Pulse Transformer with 1000 ns max pulse rise time, 35000 uH primary inductance, and dimensions of L25.5xB25.5xH25.0 mm. It is designed for GATE DRIVE applications, operates b/w -25 to 70 °C, and features a turns ratio of 3:1:1 for through hole mounting.
74030
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038; Terminal Finish: Tin/Lead (Sn/Pb); Length: 11.43 mm; Minimum ET Product: 10 V-us;
TST-9007
Beta Transformer Technology
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Maximum Operating Temperature: 130 Cel; Height: 7.11 mm; Application: GENERAL PURPOSE; Maximum Pulse Rise Time: 250 ns;
1029
C&d Technologies
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Length: 15.06 mm; Dimensions: 15.06mm X 15.06mm X 15.75mm;
1016C
1016C by Murata Manufacturing is a pulse transformer with an isolation voltage of 3500V, inductance of 3000uH, and min ET product of 200V-us. It is used for data communication applications requiring high voltage isolation and precise signal transmission.
H1164NLT
H1164NLT by Pulse Electronics is a DATACOM TRANSFORMER with 1CT:1CT Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is designed for 10/100 BASE-TX applications, operates b/w 0-70°C, and has IEEE approval. Ideal for surface mount installations with dimensions of L28.58xB12.19xH5.84 mm.
CR7983-CLD
Coilcraft
CR7983-CLD by Coilcraft is a Pulse & Datacom Transformer with 5000V isolation voltage, 256uH inductance, and 1:2 turns ratio. Ideal for data communication applications due to its surface mounting feature and nominal input voltage of 5V. Operating temperature ranges from -40°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved