Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
0805LS-102XJLC by Coilcraft is a surface mount fixed inductor with 1uH nominal inductance, 0.69 ohm DC resistance, and 340 MHz self-resonance frequency. Ideal for RF applications, it has dual-ended terminals and operates b/w -40 to 85 °C.
Median Price
$1.268
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Element14
1+ parts
$1.830
100+ parts
-
1k+ parts
$0.773
10k+ parts
$0.712
Farnell
$0.705
$0.422
$0.389
NAC Semi
$0.354
Nova Conductors
$0.637
Component Electronics Inc.
$0.770
$0.580
$0.500
First Choice Components Inc.
Avant Electronics Limited
ACDS - Activité Composants Distribution Service
LWI Electronics Inc
Bristol Electronics
$0.352
$0.263
$0.244
VNN
Sensible Micro Corp
Sogenti Electronics
Prism Electronics
Chip Stock
Vyrian
Resion
Amalfi Trading
PC Components Company LLC
Dan-Mar Components
Atlantic Semiconductor
Sea View Technologies
Continental Prestige Electronics
$0.624
Argo Parts USA
$0.618
Netroflash
Ampacity Inc.
$0.920
Perfect Parts
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Authorized Procurement Solutions
Speed Components Ltd (Excess)
Kepictronics
Being surface mountable makes the product easy to install on circuit boards, saving space and allowing for efficient assembly.
Designed for operation at a frequency of 7.9 MHz, making it suitable for RF applications where specific frequencies are critical.
With a nominal inductance of 1 uH, this inductor is ideal for filtering and impedance matching in RF circuits.
Capable of handling a maximum rated current of 0.5 A, ensuring reliable performance under typical operating conditions.
Low DC resistance of 0.69 ohm minimizes power loss and heat generation, contributing to high efficiency.
Compact package height of 1.6 mm enables the inductor to be used in space-constrained applications without compromising performance.
Tolerance of 5% ensures that the inductor's performance stays within specified limits, enhancing overall circuit reliability.
Fixed Inductors 0805LS-102XJLC attributes and parameters. Explore more Fixed Inductors devices from Coilcraft
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
Reference Standard:
0805LS-102XJLC Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Product Change Notification (PDF)
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
EU2B-YS3103F
Idec
ROTARY SWITCH;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
1N4148WS
Continental Device India
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
PIC18F4550-I/P
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
LQM21FN100M80L
Murata Manufacturing
Murata Manufacturing's LQM21FN100M80L is an 0805 chip inductor with 10uH nominal inductance, 0.39 ohm DC resistance, and 15 MHz self-resonance frequency. Ideal for RF applications, this shielded SMT inductor operates b/w -55°C to 125°C and has a max rated current of 0.1A.
PM54-101K-RC
Bourns
Bourns PM54-101K-RC is a surface mount fixed inductor with 100uH nominal inductance, 0.7 ohm DC resistance, and 10% tolerance. It is a general-purpose inductor suitable for power applications, featuring dual-ended terminals and a max operating temperature of 125°C. Ideal for various electronic devices requiring efficient power management.
LQW15AN10NG00D
Murata Manufacturing's LQW15AN10NG00D is a wirewound chip inductor with 0.01uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C, DC resistance of 0.17 ohm, and self-resonance frequency of 5500 MHz, making it ideal for general purpose use in surface mount technology.
CTX100-5-52-R
Eaton Corporation
CTX100-5-52-R by Eaton Corp is a fixed inductor with 100uH nominal inductance, 8.2A max current, and -40 to 75°C operating temp. Ideal for power applications, it features radial terminals, iron core material, and cylindrical toroidal package style.
0402HPH-R10XJRW
Coilcraft
0402HPH-R10XJRW by Coilcraft is a surface mount fixed inductor with 0.1 uH nominal inductance, 250 MHz test frequency, and 1580 MHz self-resonance frequency. Ideal for RF applications due to its rectangular package shape and ceramic core material.
LQW15AN6N8G00D
Murata Manufacturing's LQW15AN6N8G00D is a wirewound chip inductor with 0.0068 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125 °C and a self-resonance frequency of 6000 MHz. This general-purpose inductor features dual-ended terminals and measures 0402 in size.
NR4018T2R2M
Taiyo Yuden
Taiyo Yuden's NR4018T2R2M is a shielded fixed inductor with 2.2uH nominal inductance, suitable for power applications. With a max rated current of 1.44A and self-resonance frequency of 52MHz, it operates b/w -25°C to 120°C. This SMT inductor features dual-ended terminals and ferrite core construction in a compact 4x4mm package.
33462
Hirel Systems
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Nominal Inductance (L): 58.2 uH; DC Resistance: .0053 ohm;
CTX100-2-52LP-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Manufacturer Series: CTX100-2-52LP-R;
SRP1038C-100M
Bourns SRP1038C-100M is a shielded, surface mount inductor with 10uH nominal inductance and 8.5A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a DC resistance of 0.032 ohm.
LGHK100515NJ-T
LGHK100515NJ-T by Taiyo Yuden is a 0402 surface mount inductor with 0.015 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C, 0.3 A rated current, and self-resonance frequency of 2300 MHz. Ideal for general purpose use due to its ferrite core material and high quality factor at L-nom.
XAL6030-222MEC
Coilcraft XAL6030-222MEC is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 10A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring low DC resistance of 0.01397 ohm and self-resonance frequency of 30MHz.
XFL4020-222MEC
Coilcraft XFL4020-222MEC is a shielded, dual-ended SMT inductor with 2.2uH nominal inductance and 8A max current rating. Ideal for power applications, it operates b/w -40 to 125°C, featuring low DC resistance of 0.0235 ohm and self-resonance frequency of 38MHz.
SRU2013-150Y
Bourns SRU2013-150Y is a shielded, surface mount inductor with 15uH nominal inductance and 0.85 ohm DC resistance. Ideal for power applications, it operates b/w -40 to 125°C with a max rated current of 0.46A. Its ferrite core and self-resonance frequency of 30MHz make it suitable for general purpose use.
LQM21NNR68K10D
Murata Manufacturing's LQM21NNR68K10D is an 0805 fixed inductor with 0.68uH nominal inductance, suitable for RF applications. It features a max operating temperature of 85°C, 0.15A rated current, and Q measured at 25MHz. This shielded SMT inductor has a ferrite core and wraparound terminals.
TLC/10A-101M-00
Fastron Electronics
The Fastron Electronics TLC/10A-101M-00 is a general purpose inductor with 100uH nominal inductance, 0.019 ohm DC resistance, and 20% tolerance. It operates b/w -55 to 115 °C and features radial terminal placement for easy installation. Ideal for various applications requiring fixed inductors with circular construction.
SRF0703-220M
Bourns SRF0703-220M is a shielded, surface mount inductor with 22uH nominal inductance and 1.62A max rated current. Ideal for power applications, it features dual in-line terminals, ferrite core material, and operates b/w -40 to 125°C.
DFE201612E-2R2M=P2
Murata Manufacturing's DFE201612E-2R2M=P2 is a shielded, dual-ended SMT inductor with 2.2uH nominal inductance and 1.8A rated current. Ideal for power applications, it operates b/w -40 to 125°C with a compact size of 2x1.6x1.2mm, making it suitable for various electronic devices.
#A1313AN-0004GGH=P3
GENERAL PURPOSE INDUCTOR;
DR74-101-R
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0805LS-273XJLC
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
0805LS-111XJLC
0805LS-111XJLC by Coilcraft is a fixed inductor with 0.11uH nominal inductance, 2A max current, and 1200MHz self-resonance freq. Ideal for RF applications due to its rectangular SMT package style and ceramic-ferrite core material. Operating temp range -40 to 85°C makes it suitable for various electronic devices.
0805LS-102XGLB
0805LS-102XGLB by Coilcraft is a surface mount fixed inductor with 1uH nominal inductance, 0.69 ohm DC resistance, and 340 MHz self-resonance frequency. Ideal for RF applications due to its rectangular package and dual-ended terminal placement. Operating temperature ranges from -40°C to 85°C making it suitable for various general-purpose inductor needs.
0805LS-122XJLB
0805LS-392XJLB
0805CS-471XGLC
0805CS-471XGLC by Coilcraft is a fixed inductor with 0.47uH nominal inductance, 375MHz self-resonance frequency, and 1.76ohm DC resistance. It is used as an RF inductor for general purpose applications requiring a Q factor of at least 33 at 100MHz.
0805LS-152XJLB
0805LS-152XJLB by Coilcraft is a 1.5uH SMT inductor with 7.9 MHz test frequency, ideal for RF applications. With dual-ended terminals and ceramic-ferrite core, it offers 275 MHz self-resonance frequency and operates b/w -40 to 85°C.
0805LS-153XJLB
0805LS-153XJLB by Coilcraft is a 15uH fixed inductor with dual-ended terminals, suitable for RF applications. It has a max operating temp of 85°C, DC resistance of 5.03 ohm, and self-resonance frequency of 17 MHz. Ideal for general purpose use in SMT packages.
0805LS-471XJLC
0805LS-472XJLC
0805LS-78NXJLB
0805CS-080XJLB
0805CS-221XJLB
0805HQ-5N6XJLB
0805LS-222XGLB
0805CS-220XGLC
0805HT-R33TGLB
0805HT-R33TGLB by Coilcraft is a surface mount fixed inductor with 0.33 uH nominal inductance, 150 MHz test frequency, and 32 min quality factor. Ideal for RF applications due to its 730 MHz self-resonance frequency and ceramic core material. Operating temperature ranges from -40 to 125 °C.
0805LS-102XGLC
0805LS-103XGLB
0805LS-102XJLB
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved