Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
0402CS-1N2XJRW by Coilcraft is a surface mount fixed inductor with 0.0012 uH nominal inductance, 12900 MHz self-resonance frequency, and 5% tolerance. Ideal for RF applications due to its dual-ended terminal placement and ceramic core material. Operating temperature ranges from -40 to 125 °C.
Median Price
$1.330
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.110
100+ parts
$0.663
1k+ parts
$0.564
10k+ parts
$0.478
Coilcraft
-
$0.460
$0.270
DigiKey
$2.000
$0.975
Newark
$0.762
$0.577
Farnell
$1.440
$0.698
$0.643
Nova Conductors
$0.547
DigiKey Marketplace
$1.580
Vyrian
VNN
Aranea Global
$0.536
$0.515
Argo Parts USA
$0.531
Ampacity Inc.
$1.040
Continental Prestige Electronics
$1.500
$0.955
$0.600
$0.540
Infinite Electronics LLP (Excess)
Authorized Procurement Solutions
Being surface mountable, this inductor is easy to install on PCBs, saving space and reducing assembly time.
Dual ended terminal placement allows for flexibility in circuit design and makes it easier to connect the inductor in different configurations.
Designed for use at a high test frequency of 250 MHz, making it suitable for RF applications.
With a compact 0402 size code, this inductor is ideal for applications where space is limited.
Rectangular construction offers stability and durability for reliable performance.
Properly packed in punched paper, ensuring safe transportation and storage.
Specifically designed for RF applications, providing excellent performance in radio frequency circuits.
Offers a precise nominal inductance of 0.0012 uH for accurate circuit operation.
Wraparound terminals provide secure connections and enhance the inductor's reliability in the circuit.
With a high maximum operating temperature of 125°C, this inductor can withstand elevated temperatures in various applications.
Capable of handling a maximum rated current of 0.74 A, suitable for applications requiring significant power.
Made with ceramic core material, ensuring stability and high performance in demanding environments.
Complies with the stringent automotive quality standard AEC-Q200, ensuring reliability and durability in automotive applications.
Fixed Inductors 0402CS-1N2XJRW attributes and parameters. Explore more Fixed Inductors devices from Coilcraft
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
Reference Standard:
0402CS-1N2XJRW Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
LM555CMX
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138W-7-F
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NR3015T2R2M
Taiyo Yuden
NR3015T2R2M by Taiyo Yuden is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 1.48A max rated current. Ideal for power applications, this general purpose inductor has a self-resonance frequency of 64MHz and operates b/w -25°C to 120°C.
DFE252012P-4R7M=P2
Murata Manufacturing
Murata Manufacturing's DFE252012P-4R7M=P2 is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 1.4A max rated current. Ideal for power applications, this SMT inductor has WRAPAROUND terminals, operates b/w -40 to 125 °C, and features a metal alloy core in a compact 1008 case size.
MLZ2012N6R8LT000
TDK
MLZ2012N6R8LT000 by TDK is an 0805 SMT fixed inductor with 6.8uH nominal inductance, 0.25 ohm DC resistance, and 0.55A max rated current. Ideal for general purpose applications, this shielded inductor operates b/w -55 to 125 °C and features a ferrite core material.
XAL6060-103MEB
Coilcraft XAL6060-103MEB is a shielded, surface mount fixed inductor with 10uH nominal inductance and 7A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 14MHz.
SRN8040-330M
Bourns
Bourns SRN8040-330M is a shielded, surface mount inductor with 33uH nominal inductance and 1.7A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a self-resonance frequency of 10MHz.
DRA127-330-R
Eaton Corporation
Eaton Corporation's DRA127-330-R is a shielded, surface mount fixed inductor with 32.01uH nominal inductance and 3.22A max rated current. Ideal for power applications, this general purpose inductor has dual-ended terminals and operates b/w -40 to 165°C.
LQM21NNR68K10D
Murata Manufacturing's LQM21NNR68K10D is an 0805 fixed inductor with 0.68uH nominal inductance, suitable for RF applications. It features a max operating temperature of 85°C, 0.15A rated current, and Q measured at 25MHz. This shielded SMT inductor has a ferrite core and wraparound terminals.
SRR0603-101KL
The Bourns SRR0603-101KL is a shielded, surface mount fixed inductor with 100uH nominal inductance and 1.5 ohm DC resistance. It is a general purpose inductor suitable for power applications, featuring a self-resonance frequency of 9MHz and operating temperature range from -40°C to 125°C.
DR74-220-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
B82464G4683M000
TDK's B82464G4683M000 is a shielded, surface mount fixed inductor with 68uH nominal inductance. It operates b/w -55 to 150°C, handles up to 1.3A current, and has a DC resistance of 0.13 ohm. Ideal for power applications requiring a general purpose inductor with AEC-Q200 standard compliance.
32957
Hirel Systems
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Maximum Rated Current: 151 A; No. of Functions: 3;
U05-3
Torotel Products
The Torotel Products U05-3 is a shielded RF inductor with 20000 uH nominal inductance, 1.23 ohm DC resistance, and operates b/w -55 to 85 °C. It features radial terminal placement, molybdenum permalloy core material, and circular package shape. Ideal for general purpose applications requiring precise inductance values at 0.001 MHz test frequency.
P1252.782T
Pulse Electronics
Pulse Electronics P1252.782T is a surface mount fixed inductor with 7.8uH nominal inductance, suitable for power applications. It has a max rated current of 7.5A and operates b/w -40°C to 130°C, making it ideal for general purpose use in various electronic circuits.
SCD0504T-101K-N
Chilisin Electronics
Chilisin Electronics' SCD0504T-101K-N is a surface mount fixed inductor with 100uH nominal inductance, 0.7 ohm DC resistance, and 0.52A max rated current. Ideal for power applications, this general purpose inductor operates b/w -40°C to 105°C.
NRS4012T1R0NDGG
NRS4012T1R0NDGG by Taiyo Yuden is a SMT fixed inductor with 1uH nominal inductance, 2.2A max current, and 100MHz self-resonance freq. Ideal for power applications due to its general purpose design, ferrite core material, and compact rectangular package measuring 4x4x1.2mm.
LQM2MPN2R2NG0L
Murata Manufacturing's LQM2MPN2R2NG0L is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 1.2A max rated current. Ideal for power applications, this general purpose inductor has a compact 0806 size and operates b/w -55 to 125 °C, featuring a ferrite core and wraparound terminals.
74404042100
Wuerth Elektronik & Kg
Wurth Elektronik 74404042100 is a shielded SMT inductor with 10uH nominal inductance, 1.2A max current, and 0.15 ohm DC resistance. Ideal for power applications, it has dual-ended terminals and operates b/w -40 to 125°C. AEC-Q200 compliant, it's a general-purpose component in a compact 1615 package.
74437358047
Wurth Elektronik 74437358047 is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 7.2A max rated current. Ideal for power applications, this SMT inductor has a self-resonance frequency of 19MHz and operates b/w -40°C to 125°C.
CM453232-470KL
Bourns CM453232-470KL is a 47uH SMT inductor with dual-ended terminals, ideal for RF applications. Featuring 10% tolerance, 5 ohm DC resistance, and 100°C max operating temp, it's a general-purpose component in a compact 1812 package. With a self-resonance frequency of 10 MHz and ferrite core material, it ensures high performance in various electronic circuits.
B82464A4472M000
The TDK B82464A4472M000 is a fixed inductor with 4.7uH nominal inductance, suitable for power applications. It has a max rated current of 4.3A and operates b/w -55°C to 150°C. This general-purpose inductor features dual-ended terminals and a rectangular package design for surface mount assembly.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0402HPH-R10XJRW
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
0402HPH-R10XGRW
0402HPH-R10XGRW by Coilcraft is a surface mount fixed inductor with 0.1 uH nominal inductance, 250 MHz test frequency, and 1580 MHz self-resonance frequency. Ideal for RF applications due to its rectangular shape, dual-ended terminals, and ceramic core material.
0402CS-1N0XJLW
0402CS-2N7XJLW
0402CS-8N2XJLW
0402CS-8N2XJLW by Coilcraft is a fixed inductor with 0.0082 uH nominal inductance, 4400 MHz self-resonance frequency, and 5% tolerance. Ideal for RF applications due to its rectangular shape, WRAPAROUND terminals, and ceramic core material.
0402CS-56NXGLU
0402HP-3N3XGLU
0402CS-10NXJLW
0402HPH-R12XGRW
0402HPH-R12XGRW by Coilcraft is a fixed inductor with 0.12uH nominal inductance, 1.2ohm DC resistance, and 1250MHz self-resonance frequency. Ideal for RF applications, it has dual-ended terminals and operates b/w -40 to 125°C.
0402CS-4N3XGLW
0402CS-6N2XGLU
0402CS-7N5XGLW
0402CS-7N5XGLW by Coilcraft is a surface mount fixed inductor with 0.0075 uH nominal inductance, 4800 MHz self-resonance frequency, and 125 °C max operating temperature. Ideal for RF applications due to its rectangular package and dual-ended terminal placement.
0402HPH-R12XJRW
0402CS-1N9XJLU
0402CS-2N0XJLU
0402CS-36NXJLU
0402DC-47NXGRW
0402CS-24NXJLU
0402CS-24NXJLU by Coilcraft is a surface mount fixed inductor with 0.024uH nominal inductance, suitable for RF applications. With a max operating temperature of 125°C and self-resonance frequency of 2700MHz, it's ideal for general purpose use. This dual-ended inductor has a compact size of 1.19mm x 0.64mm x 0.66mm and features silver palladium platinum terminal finish.
0402CS-2N4XJLU
0402CS-1N2XJTY
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved