Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED ATTENUATOR; JESD-609 Code: e4; Additional Features: 7/16-M; N-M, I/P POWER-MAX(PEAK)=10000W; Minimum Operating Temperature: -55 Cel; Terminal Finish: GOLD/SILVER; Characteristic Impedance: 50 ohm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
RF/Microwave Attenuators 82-40-24 attributes and parameters. Explore more RF/Microwave Attenuators devices from Cobham Plc
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
Maximum Voltage Standing Wave Ratio:
The Cobham Group comprises a number of dynamic businesses in diverse specialist areas, each of which are experts in their field. Together we are a leading global technology and services innovator, highly regarded and respected for providing solutions to the most complex problems in some of the most challenging environments and missions. From the depths of the ocean to deep space and everywhere in between, our customers mission is our mission and every mission matters. Engineers critical, cutting edge data solutions for the most challenging missions on land, sea, and in air and space; with customised solutions across the entire signal chain, including RF, microwave and high reliability microelectronics.
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
2N7002-T1-E3
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
ROHM
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
HMC468LP3E
Analog Devices' HMC468LP3E is a RF/Microwave Attenuator with 30 dBm CW input power, 7 dB nominal attenuation, and 1.8 dB max insertion loss. Ideal for applications requiring variable attenuation in the frequency range of 0-6000 MHz, this component operates b/w -40°C to +85°C with a characteristic impedance of 50 ohms.
LCAT1004-30
L-com
FIXED ATTENUATOR;
44-9
Cobham Plc
44-9 by Cobham Plc is a RF/Microwave Attenuator with 9 dB nominal attenuation, 36.99 dBm CW input power, and 1.25 max VSWR. Ideal for applications requiring fixed attenuators in the frequency range of 0-18000 MHz, featuring coaxial construction and gold terminal finish. Operating temperatures from -50 to 85°C make it versatile for various environments.
R412420124
Radiall S A
The Radiall S A R412420124 is a 20 dB fixed attenuator with max input power of 30 dBm and VSWR of 1.3. Ideal for RF applications, it operates from -55°C to 125°C, covering frequencies from 0 MHz to 3000 MHz. Constructed coaxially with gold finish, it offers reliable signal attenuation in various systems.
HMC712LP3C
Analog Devices' HMC712LP3C is a RF/Microwave Attenuator with 30 dBm CW input power, 28 dB nominal attenuation, and 50 ohm impedance. It operates from -40 to 85 °C and covers frequencies from 5-26.5 GHz. Ideal for variable attenuation in high-frequency applications.
HMC473MS8TR
VARIABLE ATTENUATOR;
HMC346ALP3E
Analog Devices' HMC346ALP3E is a RF attenuator with 30 dB attenuation, 18 dBm input power, and 1.92 VSWR. Ideal for variable attenuation in RF/microwave applications up to 14 GHz, it features GaAs technology and operates b/w -40°C to 85°C.
PSA-10
Aeroflex/inmet
FIXED ATTENUATOR; Maximum Operating Temperature: 150 Cel; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 12400 MHz; Maximum Voltage Standing Wave Ratio: 1.5; Maximum Input Power (CW): 31.76 dBm;
MTVA0300N09W3S
Emc Technology & Florida Rf Labs
FIXED ATTENUATOR; Construction: COMPONENT; Maximum Operating Frequency: 12400 MHz; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Voltage Standing Wave Ratio: 1.3;
47-10-43
FIXED ATTENUATOR; Minimum Operating Frequency: 0 MHz; Construction: COAXIAL; Terminal Finish: GOLD; Maximum Voltage Standing Wave Ratio: 1.35; JESD-609 Code: e4;
32-10
Api Technologies
FIXED ATTENUATOR; Additional Features: SMA, HIGH RELIABILITY; Minimum Operating Temperature: -55 Cel; Maximum Operating Frequency: 18000 MHz; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.35;
PE43705A-Z
Psemi
PE43705A-Z by Psemi is a RF/Microwave Attenuator with 31.75 dB Nominal Attenuation, 28 dBm Max Input Power (CW), and 3.2 dB Max Insertion Loss. It operates b/w -40 to 105 °C, has a CMOS Technology, and is ideal for applications requiring variable attenuation in the frequency range of 50 MHz to 8 GHz.
82-40-21
FIXED ATTENUATOR; Terminal Finish: GOLD; Maximum Voltage Standing Wave Ratio: 1.25; Maximum Operating Frequency: 3000 MHz; Characteristic Impedance: 50 ohm; Additional Features: 7/16-F; 7/16-M, I/P POWER-MAX(PEAK)=10000W;
5401
Smiths Group Plc
FIXED ATTENUATOR; Minimum Operating Frequency: 0 MHz; Additional Features: I/P POWER-MAX(PEAK)=200W; Maximum Voltage Standing Wave Ratio: 1.35; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -55 Cel;
PAT1220-C-6DB-T5
Susumu
The Susumu PAT1220-C-6DB-T5 is a 6 dB fixed attenuator with a max input power of 20 dBm and VSWR of 1.3. Ideal for RF/Microwave applications, it operates from -55°C to 125°C, covering frequencies from 0 MHz to 10 GHz.
HMC941ALP4E
Analog Devices' HMC941ALP4E is a RF/Microwave Attenuator with 15.5 dB Nominal Attenuation, 6.5 dB Max Insertion Loss, and 26.99 dBm Max Input Power (CW). Ideal for applications requiring variable attenuation in the frequency range of 100 MHz to 33 GHz.
HMC468LP3
Analog Devices' HMC468LP3 is a RF/Microwave Attenuator with 30 dBm CW power, 7 dB attenuation, and 1.8 dB insertion loss. Ideal for applications requiring variable attenuation in the frequency range of 0-6000 MHz.
HMC652LP2ETR
Analog Devices' HMC652LP2ETR is a RF/Microwave Attenuator with 6 terminals, operating from -40°C to 85°C. It's a fixed attenuator in a plastic/epoxy package for surface mount applications. Ideal for signal attenuation in various RF and microwave systems.
68-30-33-LIM
FIXED ATTENUATOR; Terminal Finish: Gold (Au); JESD-609 Code: e4;
284-6-21
284-6-21 by Cobham Plc is a fixed attenuator with 6 dB nominal attenuation, suitable for RF/Microwave applications. With a max input power of 46.99 dBm and VSWR of 1.3, it operates in temperatures from -55 to 100 °C, covering frequencies from 0 to 10 GHz. Ideal for panel mounting due to its coaxial construction and impedance of 50 ohms.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved